Geberit Sanitary Systems Catalogue 2015/2016 Valid from 1 April 2015 Geberit Kombifix Geberit Duofix Geberit GIS Geberit Concealed Cisterns Geberit Actuator Plates and WC Flush Controls Geberit Monolith Geberit Exposed Cisterns Geberit Cisterns for Low-Height Furniture Geberit Fill Valves and Flush Valves Systems Geberit Urinal Systems Geberit Washbasin Taps Geberit Floor Drainage Systems Geberit Waste Fittings Geberit AquaClean Appendix Geberit Kombifix 1. Geberit Kombifix 1.1 Installation elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1.1.1 1.1.5 Elements for WCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessory overview: Geberit Kombifix elements for WCs . . . . . . . . . . . . . . . . . . . . 6 Elements for washbasins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 12 Elements for bidets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Elements for urinals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Accessory overview: Geberit Kombifix elements for urinals . . . . . . . . . . . . . . . . . 13 Elements for showers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1.2 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1.2.1 For fastenings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1.1.2 1.1.3 1.1.4 5 Geberit Kombifix Installation elements Elements for WCs 1.1 Installation elements 1.1.1 Elements for WCs Accessory overview: Geberit Kombifix elements for WCs Actuator plate
s of the Sigma series Actuator plates of the Omega series Actuator plates of the Delta series Set of leg supports Set of studs with foot plate Concealed outlet for drywall and solid wall construction → p. 70 → p. 82 → p. 86 → p. 17 → p. 17 → p. 281 ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü 110.350.00.5 Element for wall-hung WC, 108 cm, with Sigma concealed cistern 12 cm 110.340.00.5 Element for wall-hung WC, 108 cm, with Sigma concealed cistern 12 cm, with leg supports 110.772.00.1 Element for wall-hung WC, 109 cm, with Sigma concealed cistern 8 cm 110.020.00.1 Element for wall-hung WC, 106 cm, with Omega concealed cistern 12 cm 110.001.00.1 Element for wall-hung WC, 82 cm, with Omega concealed cistern 12 cm, adjustable in depth 110.011.00.1 Element for wall-hung WC, 98 cm, with Omega concealed cistern 12 cm, adjustable in depth 110.170.00.1 Element for wall-hung WC, 110 cm, with Delta
ü concealed cistern 12 cm, with leg supports 110.171.00.1 Element for wall-hung WC, 110 cm, with Delta concealed cistern 12 cm 110.150.00.1 Element for wall-hung WC, 109 cm, with Delta concealed cistern 8 cm 6 Geberit Kombifix Elements for WCs Installation elements Geberit Kombifix element for wall-hung WC, 108 cm, with Sigma concealed cistern 12 cm 12 42 R½ Geberit Kombifix element for wall-hung WC, 108 cm, with Sigma concealed cistern 12 cm, with leg supports 9 100 12 42 R½ 100 9 100 100 76 18/23 5 5 +2 108 1045 41 −1 76 18/23 5 23 5 +2 108 1045 41 −1 23 0 0 0 0 65 195 65 ≥ 30 195 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For single flush, dual flush or stop-and-go flush Characteristics • Mounting frame, powder-coated, with four fixing brackets • Fastening for connection bend can be mo
unted from front • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection on the rear or at the top centre • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data ≥ 30 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For single flush, dual flush or stop-and-go flush Characteristics • Mounting frame, powder-coated, with four fixing brackets • Fastening for connection bend can be mounted from front • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free install
ation and maintenance work on concealed cistern • Water supply connection on the rear or at the top centre • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flow pressure 0.1-10 bar Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume factory setting 6 and 3 l 3-4 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Flush volume small adjustment range Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Filling segment • 2 protection plugs • 2 threaded rods M12 • Fastening material Art.
no. Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Filling segment • 2 feet • 2 protection plugs • 2 threaded rods M12 • Fastening material 110.350.00.5 Art. no. Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 110.340.00.5 Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 • Actuator plate has to be ordered separately • Actuator plate has to be ordered separately 7 Geberit Kombifix Installation elements Elements for WCs Geberit Kombifix element for wall-hung WC, 109 cm, with Sigma concealed cistern 8 cm 1-5 8 505 Geberit Kombifix element for wall-hung WC, 82 cm, with Omega concealed cistern 12 cm 42 15–205 12–205 ≤ 91 100 8 R1/2 75 R½ 100 1
8/23 5 5 51 +2 40 −1 82 77 18/23 5 5 22 41 76 0 109 0 0 23 195 6 ≥ 30 0 9 195 9 45 ≥ 30 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For single flush, dual flush or stop-and-go flush Characteristics • Mounting frame, zinc-plated, with four fastening brackets • Fastening for connection bend can be mounted from front • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection at the top, offset to left side • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Application purposes • For masonry walls • For installation in part-height p
rewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For dual flush Characteristics • Mounting frame, powder-coated, with four fixing brackets • Adjustable installation depth, 12–20.5 cm • Fastening for connection bend can be mounted from front • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l 0.1-10 bar Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume factory setting 6 and 3 l Flush volume small adjustment range 3-4 l Flush volume large adjustment range 6/9l Fl
ush volume small 3l Technical data Flow pressure Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Direct plastering netting • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 110.001.00.1 Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 110.772.00.1 Accessories • Accessory overview: Geberit Kombifix elements for
WCs → p. 6 • • 8 Actuator plate has to be ordered separately Actuator plate has to be ordered separately Geberit Kombifix Elements for WCs Installation elements Geberit Kombifix element for wall-hung WC, 98 cm, with Omega concealed cistern 12 cm 42 12–205 15–205 ≤ 91 9 45 N ew Geberit Kombifix element for wall-hung WC, 106 cm, with Omega concealed cistern 12 cm 75 R½ 42 66 18/23 5 5 45 12 R½ 98 92 23 9 100 +2 41 −1 18/23 0 5 0 195 Application purposes • For masonry walls • For installation in part-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For dual flush Characteristics • Mounting frame, powder-coated, with four fixing brackets • Adjustable installation depth, 12–20.5 cm • Fastening for connection bend can be mounted from front • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory
setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 110.011.00.1 Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 106 +2 41 −1 101 23 6 ≥ 30 76 5 0 0 195 ≥ 30 6 Applicat
ion purposes • For masonry walls • For installation in part- or room-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For dual flush Characteristics • Mounting frame, powder-coated, with four fixing brackets • Fastening for connection bend can be mounted from front • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with Mep
laFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Filling segment • 2 protection plugs • Sound insulation set • 2 threaded rods M12 • Fastening material Art. no. 110.020.00.1 • Actuator plate has to be ordered separately Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 • Actuator plate has to be ordered separately 9 Geberit Kombifix Installation elements Elements for WCs Geberit Kombifix element for wall-hung WC, 110 cm, with Delta concealed cistern 12 cm 12 42 R½ 1-6 Geberit Kombifix element for wall-hung WC, 110 cm, with Delta concealed cistern 12 cm, with leg supports 100 12 42 R½ 100 1-6 100 100 76 18/23 1095 41 1035 76 18/23 1095 41 1035 23 23 0 0 0 0 65 Application purposes • For masonry walls • For installation in part- or room-hei
ght prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For single flush, dual flush or stop-and-go flush Characteristics • Mounting frame, zinc-plated, with four fastening brackets • Fastening for connection bend can be mounted from front • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Water supply connection on the rear or at the top centre • Connection hose on angle stop valve can be attached without tools Technical data 65 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For single flush, dual flush or stop-and-go flush Characteristics • Mounting frame, zinc-plated, with four fastening brackets • Fastening for connection bend can be mounted from front • Concealed cistern with front ac
tuation, fully insulated against condensation • Immediate post flush possible with factory setting • Water supply connection on the rear or at the top centre • Connection hose on angle stop valve can be attached without tools Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flow pressure 0.1-10 bar Flush volume large adjustment range 6/9l Flush volume factory setting 6 and 3 l Flush volume small adjustment range 3-4 l Flush volume large adjustment range 6/9l Flush volume small adjustment range 3-4 l Scope of delivery • Angle stop valve R 1/2, compatible with MeplaFix, with adapter ring • Protection box for service opening • 2 distance bolts • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Filling segment • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. Scope of delivery • Angle stop valve R 1/2, compatible with Mep
laFix, with adapter ring • Protection box for service opening • 2 distance bolts • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Filling segment • 2 protection plugs • 2 feet • 2 threaded rods M12 • Fastening material 110.171.00.1 Art. no. Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 110.170.00.1 Accessories • Accessory overview: Geberit Kombifix elements for WCs → p. 6 • Actuator plate has to be ordered separately • 10 Actuator plate has to be ordered separately Geberit Kombifix Elements for WCs Installation elements Geberit Kombifix element for wall-hung WC, 109 cm, with Delta concealed cistern 8 cm 8 455 R½ 1-6 100 100 77 18/23 41 109 23 0 0 65 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:20
11 • For single flush, dual flush or stop-and-go flush Characteristics • Mounting frame, zinc-plated, with four fastening brackets • Fastening for connection bend can be mounted from front • Concealed cistern with front actuation • Immediate post flush possible with factory setting • Water supply connection at the top centre • Connection hose on angle stop valve can be attached without tools Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 6/9l Flush volume small 3l Scope of delivery • Angle stop valve R 1/2, compatible with MeplaFix, with adapter ring • Protection box for service opening • 2 distance bolts • Connection set for WC, ø 90 mm • Connection bend made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • Direct plastering netting • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 110.150.00.1 Accessories • Accessory overview: Geber
it Kombifix elements for WCs → p. 6 • Not in scope of delivery: actuator plate 11 Geberit Kombifix Installation elements Elements for washbasins 1.1.2 Elements for washbasins 1.1.3 Elements for bidets Geberit Kombifix element for bidet, Universal, adjustable in depth N ew Geberit Kombifix element for washbasin, deck-mounted tap, adjustable in depth 35 C 8-19 17-28 85±1 12–16 A 153 76 55 55 335 7 0 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For installation of washbasins Characteristics • Mounting frame, zinc-plated, with four fixing brackets • Adjustable installation depth, 8–19 cm • Fastening for connection bend, sound-absorbing • Crossbar for tap, height-adjustable Scope of delivery • 2 elbow tap connectors R 1/2, compatible with MeplaFix • 2 sound insulation bases • 2 insulating sleeves • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M
10 • Fastening material Application purposes • For masonry walls • For installation in part- or room-height prewall installations Characteristics • Mounting frame, zinc-plated, with four fastening brackets • Adjustable installation depth, 12–16 cm • Fastening distance for wall-hung bidet 18 or 23 cm, bidet fastening height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Tap attachments adjustable in width and height Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M12 • Fastening material Art. no. 457.893.00.1 Geberit Kombifix element for bidet, Universal Classic 42 Art. no. 46 18/23 457.430.00.1 8 136 X 8 4 4 0 315 235 4 93 15 32 34 0 Application purposes • For masonry walls • For installation in part- or room-height prewall installations Characteristics • Mounting frame, zinc-plated, with four fastening brackets • Fastening distance for wall-hung bide
t 18 or 23 cm, bidet fastening height-adjustable • Fastening for connection bend, sound-absorbing • Crossbar for tap, height-adjustable Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/40 mm • 2 threaded rods M12 • Fastening material Art. no. 457.608.00.1 12 Geberit Kombifix Elements for urinals Installation elements 1.1.4 Elements for urinals Accessory overview: Geberit Kombifix elements for urinals Urinal flush controls with electronic flush actuation, battery operation Element for urinal, 109-127 cm, Universal Urinal flush controls with pneumatic flush actuation Urinal flush control with electronic flush actuation, mains operation, hidden, Universal Inlet crossbar for urinal, with spray head Set of studs with foot plate → p. 174 457.611.00.1 Urinal flush controls with electronic flush actuation, mains operation → p. 178 → p. 182 → p. 176 → p. 42 → p. 17 ü ü ü ü ü ü ü 457.689.00.1 Element for urinal, 10
9–127 cm, Universal, for ü hidden urinal control 457.686.00.1 Element for urinal, 109–127 cm, Universal, with ü exposed flushing valve 13 Geberit Kombifix Installation elements Elements for urinals Geberit Kombifix element for urinal, 109-127 cm, Universal 42 Geberit Kombifix element for urinal, 109–127 cm, Universal, for hidden urinal control 42 8-125 8-125 9 9-29 R1/2 17-37 min. 9 75-33 75 9 100-118 100 R1/2 max. 81 min. 31 max. 65 109-127 100 109-127 75-33 0 0 0 0 0-20 0-20 75 Application purposes • For masonry walls • For installation in part- or room-height prewall installations Characteristics • Mounting frame, zinc-plated, with four fixing brackets • Stop valve with throttle pre-mounted • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and soundabsorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools • Can be re
trofitted with accessories to fit urinals with spray head Technical data Flow pressure 1-8 bar Maximum test pressure water 16 bar Maximum test pressure air / inert gas 3 bar Flow rate at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Water supply connection R 1/2 • Protection box for service opening • Connection set for urinal, with urinal trap • Connection bend made of PE-HD, ø 50/63 mm • Seal, ø 57/50 mm • 2 protection plugs • 2 threaded rods M8 • Fastening material Art. no. 457.611.00.1 Accessories • Accessory overview: Geberit Kombifix elements for urinals → p. 13 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For Geberit urinal flush controls for covered installation, vandal-resistant Characteristics • Mounting frame, zinc-plated, with four fixing brackets • Stop valve with throttle pre-mounted • Service opening behind uri
nal • Flexible flush hose with guide and integrated check valve • Equipped with conduit pipe to connect the sensor in the trap to the urinal flush control • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and soundabsorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools • Can be retrofitted with accessories to fit urinals with spray head Technical data Flow pressure 1-8 bar Maximum test pressure water 16 bar Maximum test pressure air / inert gas 3 bar Flow rate at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Water supply connection R 1/2 • Protection box for service opening • Connection set for urinal, with urinal trap • Connection bend made of PE-HD, ø 50/63 mm • Seal, ø 57/50 mm • 2 protection plugs • 2 threaded rods M8 • Fastening material Art. no. 457.689.00.1 Accessories â
€¢ Accessory overview: Geberit Kombifix elements for urinals → p. 13 14 Geberit Kombifix Elements for urinals Installation elements Geberit Kombifix element for urinal, 109–127 cm, Universal, with exposed flushing valve 42 8-125 min. 112-130 R1/2 75-33 100 109-127 0 0 75 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For exposed flushing valves Characteristics • Mounting frame, zinc-plated, with four fixing brackets • Fastening for connection bend, height-adjustable and sound-absorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools Scope of delivery • Water supply connection R 1/2 • Sealing washer • Connection set for urinal, with urinal trap • Connection bend made of PE-HD, ø 50/63 mm • Seal, ø 57/50 mm • 2 protection plugs • 2 threaded rods M8 • Fastening material Art. no. 457.686.00.1 Accessories • Accessory ove
rview: Geberit Kombifix elements for urinals → p. 13 15 Geberit Kombifix Installation elements Elements for showers 1.1.5 Elements for showers Geberit Kombifix element for shower, with wall drain, floor construction height from 65 mm 9 53 8 4 355 355 35 6 168 0 3 Application purposes • For drainage of floor-even showers • For solid walls, drywalls, or prewalls in solid and drywall construction • For composite seals • For floor constructions of 65–90 mm Technical data Discharge rate Characteristics • Deviating from the requirements from EN 1253, the depth of water seal is just 30 mm • Minimum screed height at inlet 65 mm • Plaster thickness 5–30 mm • Tile structure floor 2–26 mm • Tile structure wall 2–35 mm • Height-adjustable element • Adjustable sealing level for tension-free sealing connection • Drainage connection left or right • Sealing fleece, pre-mounted, 10 cm circumferential, for connecting sealing systems • Adjustable inle
t height of trap 0.4 l/s Depth of water seal 30 mm Scope of delivery • Straight connector, made of PE-HD, ø 40 mm • 1 protection box cover with integrated outlet sheet • Fastening material Art. no. 457.536.00.1 To order additionally • Ready-to-fit set Geberit Kombifix element for shower, with wall drain, floor construction height from 90 mm 9 8 53 4 355 355 5 9 193 0 3 Application purposes • For drainage of floor-even showers • For solid walls, drywalls, or prewalls in solid and drywall construction • For composite seals • For floor constructions 90–200 mm Characteristics • Quality-monitored in accordance with EN 1253-3 • Minimum screed height at inlet 90 mm • Plaster thickness 5–30 mm • Tile structure floor 2–26 mm • Tile structure wall 2–35 mm • Height-adjustable element • Adjustable sealing level for tension-free sealing connection • Drainage connection left or right • Sealing fleece, pre-mounted, 10 cm circumferential, for c
onnecting sealing systems • Adjustable inlet height of trap 16 Technical data Discharge rate 0.8 l/s Depth of water seal 50 mm Scope of delivery • Straight connector, made of PE-HD, ø 50 mm • 1 protection box cover with integrated outlet sheet • Fastening material Art. no. 457.534.00.1 To order additionally • Ready-to-fit set Geberit Kombifix For fastenings Accessories 1.2 Accessories 1.2.1 For fastenings Geberit Kombifix set of leg supports Geberit sound insulation set for wall-hung WC 0.3 s 40 49 42 4 15 Application purposes • For masonry walls • For free-standing positioning of Geberit Kombifix installation elements • For Geberit Kombifix elements for wall-hung WC or bidet • For floor constructions 0–15 cm Application purposes • For structure-borne sound insulation of WCs and bidets • For WCs and bidets with fastening distance 18 or 23 cm Characteristics • White Technical data Material Characteristics • Zinc-plated PE-E Scope of de
livery • 2 washers • 2 sound insulation sleeves • Sound insulation mat Scope of delivery • Set of 2 pieces Art. no. Art. no. 457.888.26.1 156.050.00.1 s [mm] 6 Geberit Kombifix set of studs with foot plate 25 86 15 7 Application purposes • For masonry walls • For free-standing positioning of Geberit Kombifix installation elements • For floor constructions 0–25 cm Characteristics • Zinc-plated Technical data Material Steel Scope of delivery • Set of 2 pieces Art. no. 457.872.26.1 17 Geberit Duofix 2. Geberit Duofix 2.1 Installation elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.1.1 2.1.7 Elements for WCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Accessory overview: Geberit Duofix elements for WCs . . . . . . . . . . . . . . . . . . . . .20 Elements for washbasins . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Accessory overview: Geberit Duofix elements for washbasins . . . . . . . . . . . . . .30 Elements for bidets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Elements for urinals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Accessory overview: Geberit Duofix elements for urinals . . . . . . . . . . . . . . . . . . .33 Elements for showers, with wall drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Elements for showers and bathtubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Accessory overview: Geberit Duofix elements for showers and bathtubs . . .40 Elements for loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 2.2 Accessories. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 2.2.1 For installation elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 2.1.2 2.1.3 2.1.4 2.1.5 2.1.6 19 Geberit Duofix Installation elements Elements for WCs 2.1 Installation elements 2.1.1 Elements for WCs Accessory overview: Geberit Duofix elements for WCs Actuator plates of the Sigma series Actuator plates of the Omega series Actuator plates of the Delta series Set of support brackets for WC ceramic appliances with small contact surfaces → p. 70 → p. 82 → p. 86 → p. 43 111.300.00.5 Element for wall-hung WC, 112 cm, with Sigma concealed ü ü ü1) ü cistern 12 cm 111.370.00.5 Element for wall-hung WC, 112 cm, with Sigma concealed cistern 12 cm, for odour extraction with recirculating air 111.390.00.5 Element for wall-hung WC, 112 cm, with Sigma concealed ü cistern 12 cm, corner constr
uction 111.726.00.1 Element for wall-hung WC, 112 cm, with Sigma concealed ü cistern 8 cm 111.060.00.1 Element for wall-hung WC, 112 cm, with Omega concealed ü ü ü ü ü ü cistern 12 cm 111.030.00.1 Element for wall-hung WC, 98 cm, with Omega concealed cistern 12 cm 111.003.00.1 Element for wall-hung WC, 82 cm, with Omega concealed cistern 12 cm 458.160.00.1 Element for wall-hung WC, 112 cm, with Delta concealed cistern 12 cm, without crossbar for panelling support 1) Not suitable for Geberit actuator plate Sigma60 20 ü ü Geberit Duofix Elements for WCs Installation elements Wall anchoring set for single installation Wall anchoring set for single installation, for elements without fixed crossbar Foot fastener set on rear wall Fastening set for stud clearance 50–57.5 cm Concealed outlet for drywall and solid wall construction → p. 41 → p. 41 → p. 43 → p. 42 → p. 281 ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü
ü ü ü ü ü 21 Geberit Duofix Installation elements Elements for WCs Geberit Duofix element for wall-hung WC, 112 cm, with Sigma concealed cistern 12 cm 12 50 R½ 6 100 100 112 18/23 5 5 1045 +2 41 −1 ≤ 62 23 0 0 0−20 48 73 195 ≥ 30 9−135 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For single flush, dual flush or stop-and-go flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotata
ble, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection on the rear or at the top centre • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets 22 Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for
service opening • 2 protection plugs • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 threaded rods M12 • Fastening material Art. no. 111.300.00.5 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately Geberit Duofix Elements for WCs Installation elements Geberit Duofix element for wall-hung WC, 112 cm, with Sigma concealed cistern 12 cm, for odour extraction with recirculating air 12 50 R½ 6 100 100 18/23 5 5 112 +2 41 −1 ≤ 62 23 0 0 0−20 48 73 195 ≥ 30 9−135 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For connecting an odour extracti
on unit using Geberit actuator plate Sigma40 • For dual flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with front actuation, fully insulated against condensation • Can be used without odour extraction unit for dual flush, single flush or stop-and-go flush • Immediate post flush possible with factory setting • Concealed cistern prepared for odour extraction unit with recirculating air • Tool-free
installation and maintenance work on concealed cistern • Water supply connection at the top, offset to left side • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets • Concealed outlet for power supply unit can be clamped in the drilling hole of the panelling • Conduit pipe for electrical connection, 1.6 m, pre-mounted on cistern Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • 2 protection plugs • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 threaded rods M12 • Concealed outlet for drillin
g hole ø 76 mm, for power supply unit • Fastening material Art. no. 111.370.00.5 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately 23 Geberit Duofix Installation elements Elements for WCs Geberit Duofix element for wall-hung WC, 112 cm, with Sigma concealed cistern 12 cm, corner construction 53−76 R½ 128 6 100 100 112 18/23 5 5 +2 ≤ 62 1045 41 −1 23 0 0 0−20 9 48 195 11 ≥ 30 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For free-standing installation with wall fixation on one side • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For single flush, dual flush or stop-and-go flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Variable wall fixture 30°–60°, can be
pulled out 10 cm on both sides • Integrated panelling support at front, top and sides, extendible • Minimum and maximum dimensions for floor area: W = 56 / 76 cm, D = 28 / 38 cm, leg length = 39.6 / 53.7 cm • Frame suitable for WC ceramic appliances with small contact surface • Leg support zinc-plated, adjustable 0–20 cm • Leg support not on the perimeter for lateral offset of discharge pipe • Straight connector can be mounted without tools • Fastening for straight connector, sound-absorbing • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection on the rear or at the top centre • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets 24 Technical data Flow pressure 0.1-10 bar Flush volu
me factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Straight connector made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Concealed outlet for drilling hole ø 68 mm, for electrical connection • Fastening material • Connection for single-side wall fixation Art. no. 111.390.00.5 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately Geberit Duofix Elements for WCs Installation elements Geberit Duofix element for wall-hung WC, 112 cm, with Sigma concealed cistern 8 cm 8 59 R½ 1–5 98 100 135 18/23 5 112 5 ≤ 62 41+2 –1 98 23 0 0 0 0–12 0â€
“12 0–12 48 9 45 ≥ 34 16 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For single flush, dual flush or stop-and-go flush • For floor constructions 0–12 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support, zinc-plated, infinitely variable in height • Leg support, non-slip • Foot plate depth suitable for installation in U-profiles UW 50 and Geberit Duofix system rails • Connection bend can be installed without tools at different depths • Connection bend can be mounted vertically with front flush • Waste connector bend, extended, for connection in floor • Fastening for connection bend, sound-absorbing • Conc
ealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection at the top, offset to left side • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 6/9l Flush volume small 3l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • 2 protection plugs • 2 wall anchorings • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 threaded rods M12 • Fastening material Art. no. 111.726.00.1 Accessories • Accesso
ry overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately 25 Geberit Duofix Installation elements Elements for WCs Geberit Duofix element for wall-hung WC, 82 cm, with Omega concealed cistern 12 cm 50 14 ≤ 91 17 7 45 75 R½ 18/23 5 5 ≤ 62 82 +2 40 −1 76 22 32 0 0 0−20 73 195 ≥ 30 48 9–135 Application purposes • For drywall construction • For installation in part-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For dual flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable
, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets 26 Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service
opening • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 111.003.00.1 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately Geberit Duofix Elements for WCs Installation elements Geberit Duofix element for wall-hung WC, 98 cm, with Omega concealed cistern 12 cm 50 ≤ 107 17 14 7 45 91 R½ 18/23 5 98 5 92 +2 41 −1 ≤ 62 23 33 0 0 0−20 73 48 195 ≥ 30 9–135 Application purposes • For drywall construction • For installation in part-height prewall installations • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For dual flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9
mm drilling holes for fastening in wood frame construction • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flu
sh volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 111.030.00.1 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately 27 Geberit Duofix Installation elements Elements for WCs N ew Geberit Duofix element for wall-hung WC, 112 cm, with Omega concealed cistern 12 cm 50 45 12 9 R½ 100 18/23 5 112 5 101 23 ≤ 62 +2 41 −1 33 0 0 0−20 73 195 ≥ 30 48 9–135 Application purposes • For drywall construction • For installation in part- or room-height prewall installations •
For installation in room-height installation walls • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For dual flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on con
cealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets 28 Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 111.060.00.1 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately Geberit Duofix Elements for WCs Installation elements Geberit Duofix e
lement for wall-hung WC, 112 cm, with Delta concealed cistern 12 cm, without crossbar for panelling support 50 R1/2 12 1–6 100 100 18/23 112 1045 ≤ 62 +2 41 −1 23 0 0 0–20 0-20 73 48 9/11 (d 90) 10/12 (d 110) Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For wall-hung WCs with projection up to 62 cm • For single flush, dual flush or stop-and-go flush • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Frame with holes to receive Geberit Duofix wall anchoring for elements without fixed crossbar • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Leg support zinc-plated, adjustable 0–20 c
m • Foot plates made of plastic, depth suitable for installation in Uprofiles UW 50 • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Water supply connection on the rear or at the top centre Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 6/9l Flush volume small adjustment range 3-4 l Scope of delivery • Angle stop valve R 1/2, with adapter ring • Protection box for service opening, made of polystyrene foam • 2 distance bolts • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 2 protection plugs • 2 threaded rods M12 • Fastening material Art. no. 458.160.00.1 Accessories • Accessory overview: Geberit Duofix elements for WCs → p. 20 • Actuator plate has to be ordered separately 29 Geberit Duofix Installation elements
Elements for washbasins 2.1.2 Elements for washbasins Accessory overview: Geberit Duofix elements for washbasins Fastening for washbasins with fastening distance 38–58 cm 111.490.00.1 Element for washbasin, 82–98 cm, deck-mounted tap Foot fastener set on rear wall Fastening set for stud clearance 50–57.5 cm → p. 207 → p. 41 → p. 43 → p. 42 ü Element for washbasin, 112 cm, deck-mounted tap Wall anchoring set for single installation → p. 43 111.434.00.1 Concealed base unit HANSAVAROX with shut-off ü ü ü ü ü ü ü ü ü ü 111.493.00.1 ü Element for washbasin, 112–130 cm, wall-mounted ü tap, concealed Geberit Duofix element for washbasin, 112 cm, deck-mounted tap 50 75 100 5-38 85 112 7 80 76 153 0 52 306 0 0-20 73 48 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For installation of washbasins
• For deck-mounted taps • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Fastening distance for washbasin 5–38 cm • Fastening for connection bend, height-adjustable and sound-absorbing • Crossbar for tap adjustable in height and depth 30 Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M10 • Fastening material Art. no. 111.434.00.1 Accessories • Accessory overview: Geberit Duofix elements for washbasins → p. 30 Geberit Duofix Elements for washbasins Installation elements Geberit Duofix element for washbasin, 82–98 cm, deck-mounted tap 50 Geberit Duofix element for washbasin, 112–130 c
m, wall-mounted tap, concealed 11 50 75 5-38 85 85 5-38 7 76 153 0 98 80 (82) 112-130 80 52 52 0 306 0 0 0-20 0-20 48 73 Application purposes • For drywall construction • For installation in part-height prewall installations • For installation of washbasins • For deck-mounted taps • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Fastening distance for washbasin 5–38 cm • Fastening for connection bend, height-adjustable and sound-absorbing • Crossbar for tap adjustable in height and depth Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M10 • Fastening material Art. no. 111.490.
00.1 Accessories • Accessory overview: Geberit Duofix elements for washbasins → p. 30 73 48 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For installation of washbasins • For concealed taps • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Fastening distance for washbasin 5–38 cm • Mounting plate made of veneered wood, waterproof bonded, adjustable in height and depth • Fastening for connection bend, height-adjustable and sound-absorbing Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm â€
¢ 2 threaded rods M10 • Fastening material Art. no. 111.493.00.1 Accessories • Accessory overview: Geberit Duofix elements for washbasins → p. 30 31 Geberit Duofix Installation elements Elements for bidets 2.1.3 Elements for bidets Geberit Duofix element for bidet, 112 cm, Universal 50 4 100 112 8-38 18/23 0 0 0-20 0-20 48 73 10 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For wall-hung bidets with deck-mounted tap • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Fastening distance for wall-hung bidet 18 or 23 cm,
bidet fastening height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Tap attachments adjustable in width and height Geberit Duofix element for bidet, 98 cm, Universal 8-38 4 98 0 0 0-20 0-20 73 111.539.00.1 Geberit Duofix element for bidet, 82 cm, Universal 4 50 8-38 18/23 82 0 0 0-20 0-20 48 Application purposes • For drywall construction • For installation in part-height prewall installations • For wall-hung bidets with deck-mounted tap • For floor constructions 0–20 cm 111.520.00.1 18/23 Art. no. 10 Art. no. 50 Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M12 • Fastening material 73 Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M12 • Fastening material 48 10 Application purposes • For drywall construction • For installation in part-height prewall installations • For wall-hung bid
ets with deck-mounted tap • For floor constructions 0–20 cm 32 Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Fastening distance for wall-hung bidet 18 or 23 cm, bidet fastening height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Tap attachments adjustable in width and height Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Fastening distance for wall-hung bidet 18 or
23 cm, bidet fastening height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Tap attachments adjustable in width and height Scope of delivery • Connection bend made of PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M12 • Fastening material Art. no. 111.524.00.1 Geberit Duofix Elements for urinals Installation elements 2.1.4 Elements for urinals Accessory overview: Geberit Duofix elements for urinals Urinal flush controls with electronic flush actuation, battery operation Urinal flush controls with electronic flush actuation, mains operation Urinal flush controls with pneumatic flush actuation Urinal flush control with electronic flush actuation, mains operation, hidden, Universal Inlet crossbar for urinal, with spray head Wall anchoring set for single installation Wall anchoring set for single installation, for elements without fixed crossbar Foot fastener set on rear wall Fastening set for stud clearance 50–57.5 cm
→ p. 174 → p. 178 → p. 182 → p. 174 → p. 42 → p. 41 → p. 41 → p. 43 → p. 42 ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü 111.616.00.1 Element for urinal, 112–130 cm, Universal 111.689.00.1 Element for urinal, ü 112–130 cm, Universal, for hidden urinal control 111.618.00.1 Element for urinal, 112–130 cm / (ü)1) (ü)1) ü 122–130 cm, Joly 111.686.00.1 Element for urinal, 112–130 cm, Universal, with exposed flushing valve 111.665.00.5 Element for urinal, 130 cm, Universal, for urinal flush control Basic, (ü)2) (ü)2) (ü)2) ü without crossbar for panelling support 1) 2) Only possible with centred position of the concealed housing Only compatible with Geberit urinal flush controls Basic 33 Geberit Duofix Installation elements Elements for urinals Geberit Duofix element for urinal, 130 cm, Universal, for urinal flush control Basic, without crossbar for panelling support 50 R½ 75 Geberit Duofix element for
urinal, 112–130 cm, Universal 50 10 100-117 13-30 75 9 100-118 12-32 R1/2 17-37 min. 9 100 26-38 75-33 112-130 max. 65 75-33 130 0 0-20 0-20 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Frame with holes to receive Geberit Duofix wall anchoring for elements without fixed crossbar • Leg support zinc-plated, adjustable 0–20 cm • Foot plates made of plastic, depth suitable for installation in U-profiles UW 50 • Stop valve with throttle pre-mounted • Protection box for service opening 13.5 x 13.5 cm can be cut to length without tools • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and soundabsorbing • Urin
al fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools 1-8 bar 16 bar Maximum test pressure air / inert gas 3 bar Flow rate at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Water supply connection R 1/2 • Protection box with cover • Connection pipe between inlet ø 32 mm and urinal, with seal to urinal • 1 protection plug • Connection bend made of PE-HD, ø 63/50 mm • Protective cap • Seal, ø 57/50 mm • Urinal trap ø 50 mm, with seal on urinal • 2 threaded rods M8 • Fastening material Art. no. 111.665.00.5 • 34 73 48 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame con
struction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Stop valve with throttle pre-mounted • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools • Can be retrofitted with accessories to fit urinals with spray head Technical data Only compatible with art. no. 115.817.xx.5 and 115.818.xx.5 Flow pressure 1-8 bar Maximum test pressure water Technical data Maximum test pressure water 0-20 48 73 Flow pressure 0 0-20 0 0 16 bar Maximum test pressure air / inert gas 3 bar Flow rate at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Elbow tap connector R 1/2 • Protection box with
cover • Connection pipe between inlet ø 32 mm and urinal, with seal to urinal • 1 protection plug • Connection bend made of PE-HD, ø 63/50 mm • Protective cap • Seal, ø 57/50 mm • Urinal trap ø 50 mm, with seal on urinal • 2 threaded rods M8 • Fastening material Art. no. 111.616.00.1 Accessories • Accessory overview: Geberit Duofix elements for urinals → p. 33 Geberit Duofix Elements for urinals Installation elements Geberit Duofix element for urinal, 112–130 cm, Universal, for hidden urinal control 50 75 Geberit Duofix element for urinal, 112–130 cm, Universal, with exposed flushing valve 50 9 75 R1/2 75-33 R1/2 max. 81 min. 31 65 112-130 112-130 75-33 0 0 0 0-20 73 73 48 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For Geberit urinal flush controls for covered installation, vandal-resistant • For floor c
onstructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Stop valve with throttle pre-mounted • Service opening behind urinal • Flexible flush hose with guide and integrated check valve • Equipped with conduit pipe to connect the sensor in the trap to the urinal flush control • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools • Can be retrofitted with accessories to fit urinals with spray head Technical data Flow pressure 1-8 bar Maximum test pressure water 16 bar Maximum test pressure air /
inert gas 3 bar Flow rate at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Water supply connection R 1/2 • Protection box with cover • Connection pipe between inlet ø 32 mm and urinal, with seal to urinal • 1 protection plug • Connection bend made of PE-HD, ø 63/50 mm • Seal, ø 57/50 mm • Protective cap • 2 threaded rods M8 • Fastening material 0 0-20 0-20 48 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For exposed flushing valves • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geb
erit Duofix system rails • Fastening for connection bend, height-adjustable and sound-absorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix • 1 protection plug • Sealing washer • Connection bend made of PE-HD, ø 63/50 mm • Protective cap • Seal, ø 57/50 mm • Urinal trap ø 50 mm, with seal on urinal • 2 threaded rods M8 • Fastening material Art. no. 111.686.00.1 Accessories • Accessory overview: Geberit Duofix elements for urinals → p. 33 Art. no. 111.689.00.1 Accessories • Accessory overview: Geberit Duofix elements for urinals → p. 33 35 Geberit Duofix Installation elements Elements for urinals Geberit Duofix element for urinal, 112–130 cm / 122–130 cm, Joly 285 ≥ 165 142 365 75 9 100 65 112–130 615 0 0 0–20 73 48 Application purposes • For drywall construction • For installation
in part- or room-height prewall installations • For installation in room-height installation walls • For installation of semi-recessed urinal ceramics Keramag Joly • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Connection positions set for urinal Keramag Joly • Crossbar with concealed housing to be positioned on centre or laterally • Stop valve with throttle pre-mounted • Concealed housing prepared for connection to on-site connection hose for urinal • Crossbar with predetermined positions for urinal fasteners M8 and trap Technical data Flow pressure 1-8 bar Maximum test pressure water 16 bar Maximum test pressure air / inert gas 3 bar Flow rat
e at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Water supply connection R 1/2 • Protection box with cover • Connection bend made of PE-HD, ø 63/50 mm • Seal, ø 57/50 mm • Urinal trap ø 50 mm, with seal on urinal • 2 threaded rods M8 • 2 cut-out templates • Fastening material Art. no. 111.618.00.1 To order additionally • Reinforced braided hose between concealed housing and urinal Accessories • Accessory overview: Geberit Duofix elements for urinals → p. 33 36 Geberit Duofix Elements for showers, with wall drain Installation elements 2.1.5 Elements for showers, with wall drain Geberit Duofix element for shower, 130 cm, with wall drain, wall-mounted tap, concealed, floor construction height from 65 mm 50 11 355 355 86 100 100 0 0 130 65–9 35 73 48 11 Application purposes • For drainage of floor-even showers • For floor constructions of 65–90 mm • For drywall construction •
For concealed or surface-mounted taps • For composite seals Characteristics • Deviating from the requirements from EN 1253, the depth of water seal is just 30 mm • Self-supporting frame, powder-coated • Adjustable sealing level for tension-free sealing connection • Sealing fleece, pre-mounted, 10 cm circumferential, for connecting sealing systems • Mounting plate made of veneered wood, waterproof bonded, adjustable in height and depth • Adjustable inlet height of trap • Minimum screed height at inlet 65 mm • Panelling thickness 10–40 mm • Tile structure floor 2–26 mm • Tile structure wall 2–35 mm • Drainage connection left or right Technical data Discharge rate 0.4 l/s Depth of water seal 30 mm Scope of delivery • Straight connector, made of PE-HD, ø 40 mm • Elbow tap connector R 1/2, compatible with MeplaFix • Sealing washer • Sound insulation base • Insulating sleeve • Protection plug • 1 protection box cover with integrated outlet s
heet • Fastening material Art. no. 111.581.00.1 To order additionally • Ready-to-fit set 37 Geberit Duofix Installation elements Elements for showers, with wall drain Geberit Duofix element for shower, 130 cm, with wall drain, wall-mounted tap, concealed, floor construction height from 90 mm 50 11 355 355 86 100 100 0 0 130 9–20 5 73 48 125 Application purposes • For drywall construction • For concealed or surface-mounted taps • For composite seals • For drainage of floor-even showers • For floor constructions 90–200 mm Characteristics • Quality-monitored in accordance with EN 1253-3 • Self-supporting frame, powder-coated • Adjustable sealing level for tension-free sealing connection • Sealing fleece, pre-mounted, 10 cm circumferential, for connecting sealing systems • Mounting plate made of veneered wood, waterproof bonded, adjustable in height and depth • Adjustable inlet height of trap • Minimum screed height at inlet 90 mm • Panel
ling thickness 10–40 mm • Tile structure floor 2–26 mm • Tile structure wall 2–35 mm • Drainage connection left or right 38 Technical data Discharge rate 0.8 l/s Depth of water seal 50 mm Scope of delivery • Straight connector, made of PE-HD, ø 50 mm • Elbow tap connector R 1/2, compatible with MeplaFix • Sealing washer • Sound insulation base • Insulating sleeve • Protection plug • 1 protection box cover with integrated outlet sheet • Fastening material Art. no. 111.580.00.1 To order additionally • Ready-to-fit set Geberit Duofix Elements for showers, with wall drain Installation elements Geberit Duofix element for shower, 50 cm, with wall drain, floor construction height from 65 mm 50 355 50 35 355 86 0 65–9 48 73 11 Application purposes • For drywall construction • For drainage of floor-even showers • For floor constructions of 65–90 mm • For composite seals Technical data Discharge rate 0.4 l/s Depth of water seal 30
mm Scope of delivery • Straight connector, made of PE-HD, ø 40 mm • 1 protection box cover with integrated outlet sheet • Fastening material Characteristics • Deviating from the requirements from EN 1253, the depth of water seal is just 30 mm • Self-supporting frame, powder-coated • Minimum screed height at inlet 65 mm • Adjustable inlet height of trap • Panelling thickness 10–40 mm • Tile structure floor 2–26 mm • Tile structure wall 2–35 mm • Adjustable sealing level for tension-free sealing connection • Drainage connection left or right • Sealing fleece, pre-mounted, 10 cm circumferential, for connecting sealing systems Art. no. 111.593.00.1 To order additionally • Ready-to-fit set Geberit Duofix element for shower, 50 cm, with wall drain, floor construction height from 90 mm 50 355 50 5 355 86 0 9–20 48 73 125 Application purposes • For drywall construction • For drainage of floor-even showers • For floor constructions 90–20
0 mm • For composite seals Characteristics • Quality-monitored in accordance with EN 1253-3 • Self-supporting frame, powder-coated • Adjustable inlet height of trap • Minimum screed height at inlet 90 mm • Panelling thickness 10–40 mm • Tile structure floor 2–26 mm • Tile structure wall 2–35 mm • Adjustable sealing level for tension-free sealing connection • Drainage connection left or right • Sealing fleece, pre-mounted, 10 cm circumferential, for connecting sealing systems Technical data Discharge rate 0.8 l/s Depth of water seal 50 mm Scope of delivery • Straight connector, made of PE-HD, ø 50 mm • 1 protection box cover with integrated outlet sheet • Fastening material Art. no. 111.591.00.1 To order additionally • Ready-to-fit set 39 Geberit Duofix Installation elements Elements for showers and bathtubs 2.1.6 Elements for showers and bathtubs Accessory overview: Geberit Duofix elements for showers and bathtubs Accessories for wall dr
ains Concealed base unit HANSAVAROX with shut-off Wall anchoring set for single installation Foot fastener set on rear wall Fastening set for stud clearance 50–57.5 cm → p. 218 → p. 207 → p. 41 → p. 43 → p. 42 ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü 111.580.00.1 Element for shower, 130 cm, with wall drain, wall-mounted tap, concealed, floor construction height from 90 mm 111.581.00.1 Element for shower, 130 cm, with wall drain, wall-mounted tap, concealed, floor construction height from 65 mm 111.591.00.1 Element for shower, 50 cm, with wall drain, floor construction height from 90 mm 111.593.00.1 Element for shower, 50 cm, with wall drain, floor construction height from 65 mm 2.1.7 Elements for loads Geberit Duofix element for support handles, 112 cm, barrier-free 4 365 100 Scope of delivery • Fastening material 85 Art. no. 50 111.790.00.1 112 Accessories • Geberit Duofix wall anchoring set for single installation → p
. 41 0 0 0-20 73 48 Application purposes • For drywall construction • For installation in part- or room-height prewall installations • For installation in room-height installation walls • Suitable for barrier-free construction • For fastening support handles • For floor constructions 0–20 cm Characteristics • Self-supporting frame, powder-coated • Frame with ø 9 mm drilling holes for fastening in wood frame construction • Leg support zinc-plated, adjustable 0–20 cm • Leg support, non-slip • Foot plates, rotatable, depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails • Mounting plate made of veneered wood, waterproof bonded, height-adjustable 40 Geberit Duofix For installation elements Accessories 2.2 Accessories 2.2.1 For installation elements Geberit Duofix wall anchoring set for single installation 135–20 Geberit Duofix wall anchoring set for single installation, corner construction 14-20 85 6 38 2
Application purposes • For fastening Geberit Duofix installation elements in front of drywalls and solid walls • For fastening panelling in part-height prewall installations Characteristics • Can be adjusted in depth from the front, infinitely variable, with fast adjustment • Wall inlet rotatable by 360° • Threaded rod M10, zinc-plated Technical data Material Die-cast zinc / steel/plastic Application purposes • For fastening Geberit Duofix installation elements in front of drywalls and solid walls • For fastening panelling in part-height prewall installations Characteristics • Can be adjusted in depth from the front, infinitely variable • Integrated panelling support • Threaded rod M10, zinc-plated • Wall inlet rotatable by 360° • Infinitely variable angle adjustment possible for corner installation Technical data Material Scope of delivery • Set of 2 pieces Die-cast zinc / steel/plastic Scope of delivery • Set of 2 pieces Art. no. 111.815.00.1 Art.
no. Accessories • Geberit Duofix extension set for wall anchoring → p. 42 Geberit Duofix wall anchoring set for single installation 9–11 52 111.835.00.1 Accessories • Geberit Duofix extension set for wall anchoring → p. 42 Geberit Duofix wall anchoring set for single installation, for elements without fixed crossbar 4 12-20 4 28 Application purposes • For fastening Geberit Duofix installation elements in front of drywalls and solid walls • For fastening Geberit Duofix elements for wall-hung WC with concealed cistern 8 cm Characteristics • Can be adjusted in depth from the front, infinitely variable • Wall inlet rotatable by 360° • Threaded rod M10, zinc-plated Technical data Material Scope of delivery • 2 prevailing torque nuts • Fastening material Art. no. Steel / plastic 4 Application purposes • For fastening Geberit Duofix installation elements in front of drywalls and solid walls • For Geberit Duofix installation elements without fixed c
rossbar for panelling support Characteristics • Adjustable in depth • Zinc-plated • Infinitely variable angle adjustment possible for corner installation Scope of delivery • Set of 2 pieces Art. no. 111.839.00.1 242.048.00.1 41 Geberit Duofix Accessories For installation elements Geberit heavy-duty dowel Scope of delivery • 2 wall anchorings • Crossbar for panelling support • Fastening material 86 08 M8 Art. no. Application purposes • For fastening Geberit GIS mounting brackets and GIS installation kits for free-standing GIS walls on the unfinished building structure (concrete) • For fastening Geberit Duofix installation elements with large, reinforced foot plates to the rough building structure (concrete) Characteristics • Zinc-plated Geberit inlet crossbar for urinal, with spray head Application purposes • For Geberit installation elements for urinal with flexible connection • For urinal ceramics Laufen Caprino Plus 42065/42066 • For connecting
urinals with spray head Technical data Material 111.813.00.1 Steel Art. no. Characteristics • Can be installed without tools • Inlet Rp 1/2 adjustable sideways 461.037.26.1 N ew Geberit Duofix extension set for wall anchoring 220 M 10 Scope of delivery • Connecting nipple • 1 protection plug • Crossbar Art. no. 242.042.00.1 Application purposes • For extending Geberit Duofix wall anchorings by 20 cm • For Geberit Duofix wall anchoring with threaded rod M10 Characteristics • Can be shortened • Zinc-plated 8 Steel Scope of delivery • Set of 2 pieces Art. no. 111.887.00.1 Geberit Duofix crossbar, clip-on, for panelling support Characteristics • Zinc-plated Technical data Scope of delivery • 2 fixing brackets • Fastening material Art. no. 111.869.00.1 Application purposes • For fastening Geberit Duofix installation elements in front of drywalls and solid walls • For panelling supports with part-height prewall installations • For Geberit Duo
fix installation elements without fixed crossbar for panelling support Characteristics • Crossbar for panelling support can be mounted by pushing it on 23 8 5 Application purposes • For drywall construction • For installation in room-height installation walls • For fastening Geberit Duofix installation elements between two studs at a distance of 50–57.5 cm Material 42 8 23 Technical data Material Geberit Duofix fastening set for stud clearance 50–57.5 cm Steel Geberit Duofix For installation elements Accessories Geberit Duofix fastening for washbasins with fastening distance 38–58 cm Geberit set of support brackets for WC ceramic appliances with small contact surfaces 4 395 35 13 21 21 5 Application purposes • For fastening washbasins with a fastening distance > 38 cm to Geberit Duofix elements for washbasin Characteristics • Zinc-plated • Fastening distance for threaded rods 38–58 cm Technical data Material Steel Scope of delivery • 2 cavity
profiles • 2 threaded rods M10 • Reinforcing profile • Fastening material Application purposes • For additional support of WC ceramic appliances with contact surface X < 17 cm (contact surface X = dimension of the lower edge of the WC ceramic appliance to the middle of the fastening hole in the WC ceramic appliance) • For Geberit Duofix and Geberit GIS elements for wall-hung WC with intended retainers • It is known that the supports must be fitted on the following WC ceramic appliances: 1) Make: Flaminia (Italy - www.ceramicaflaminia.it), type: Link 5051 and Mini Link 5064 2) Make: Globo (Italy - www.ceramicaglobo.com), type: GLOBOconcept SAS02 and SAS03 Characteristics • Zinc-plated • U-profile Art. no. 111.868.00.1 Technical data Material Geberit Duofix foot fastener set on rear wall 13 - 20 Steel Scope of delivery • Set of 2 pieces Art. no. 111.847.00.1 Application purposes • For alternative foot fastening of the Geberit Duofix elements to the rear wall
Characteristics • Adjustable in depth • Zinc-plated Technical data Material Steel Scope of delivery • Set of 2 pieces Art. no. 111.867.00.1 43 Geberit Duofix Accessories For installation elements Geberit Duofix mounting plate for concealed stop valves 306 Geberit sound insulation set for wall-hung WC s 40 66 153 8 42 74 42 Application purposes • For fastening Geberit concealed stop valves • For Geberit Duofix installation elements with intended retainers • For installation of water sections in Geberit Duofix installation elements Characteristics • Zinc-plated Material Material Steel 111.807.00.1 Accessories • Geberit Mepla concealed stop valve with cover collar and fastening • Geberit concealed stop valve with cover collar and fastening Geberit retrofit adapter for inlet Rp 1/2, urinal G1/2 54 73 26 Application purposes • For retrofitting installed Geberit Duofix elements for urinal with inlet ø 32 mm to inlet Rp 1/2“ 44 PE-E Scope of d
elivery • 2 washers • 2 sound insulation sleeves • Sound insulation mat Art. no. 242.309.00.1 Characteristics • White Technical data Technical data Art. no. Application purposes • For structure-borne sound insulation of WCs and bidets • For WCs and bidets with fastening distance 18 or 23 cm Art. no. 156.050.00.1 s [mm] 6 For installation elements Geberit Duofix Accessories 45 Geberit GIS 3. Geberit GIS 3.1 System walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 3.1.1 3.1.2 3.1.3 Support systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Accessories for prefabrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Panellings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 3
.2 Installation elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 3.2.1 3.2.5 3.2.6 3.2.7 Elements for WCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Accessory overview: Geberit GIS elements for WCs . . . . . . . . . . . . . . . . . . . . . . . . 51 Elements for washbasins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Elements for bidets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Elements for urinals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Accessory overview: Geberit GIS elements for urinals . . . . . . . . . . . . . . . . . . . . . .54 Elements for taps and devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .56 Elements for loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 3.3 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 3.3.1 3.3.2 3.3.3 For system walls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 For supply systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 For drainage systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 3.2.2 3.2.3 3.2.4 47 Geberit GIS System walls Support systems 3.1 System walls 3.1.1 Support systems Geberit GIS profile Geberit GIS mounti
ng bracket 5m 32 75 32 55 5 Application purposes • For creating Geberit GIS support systems Application purposes • For creating Geberit GIS support systems • For fastening Geberit GIS support systems to the building structure • For compensating for construction differences Characteristics • Zinc-plated Technical data Material 05 Characteristics • Zinc-plated • Short and long leg with two oblong holes each Steel Art. no. Technical data 461.000.25.1 Material Scope of delivery • 1 ratchet pin • Nut M8 • Fastening material Geberit GIS profile connector 6 Steel 32 55 32 2 Art. no. 461.002.00.1 12 Application purposes • For creating Geberit GIS support systems • For connecting Geberit GIS profiles at right angles without tools Characteristics • Maximum insertion depth marked • Clip made of spring steel, protected against corrosion • Lengths can be compensated up to 1 cm per profile side • Lever for manual actuation made of die-cast zinc â
€¢ Pre-locking function Art. no. 461.200.00.1 Accessories • Sound insulating panel for Geberit GIS mounting bracket → p. 59 Geberit GIS connecting piece 9-14 3 3 Application purposes • For creating Geberit GIS support systems • For making Geberit GIS support systems more rigid Characteristics • Two die-cast parts, can be turned 90° relative to one another • Clip made of spring steel • Adjustable in depth without tools, 5-mm grid • Insertion direction marked • Can be shortened to 3 cm Technical data Material Art. no. 461.003.00.1 48 Die-cast zinc Geberit GIS Accessories for prefabrication System walls Geberit GIS connecting strap 3 Geberit GIS corner stiffener for transport 04 58 75 13 75 13 Application purposes • For making prefabricated Geberit GIS support systems more rigid Application purposes • For creating Geberit GIS support systems • For connecting Geberit GIS profiles near horizontal joints of panelling • For right-angled or oblique
wall inlets Characteristics • Zinc-plated Technical data Material Characteristics • Zinc-plated • With oblong hole Steel Art. no. 461.089.00.1 Technical data Material Steel 3.1.3 Panellings Scope of delivery • 2 ratchet pins • 2 nuts M8 Geberit GIS panel 60 Art. no. 18 461.022.00.1 3.1.2 Accessories for prefabrication 130 Geberit GIS profile guide 42 19 2 2 Application purposes • For precisely connecting two Geberit GIS support systems on the same level Technical data Material Art. no. 461.064.00.1 Die-cast zinc Application purposes • For single-layer, vertical panelling of Geberit GIS support systems • For use in the moisture load classes 0 and A01 Characteristics • Impregnated • Environmentally compatible • Building material class A2, non-combustible, in accordance with DIN 4102 Technical data Weight 13 kg Material Plasterboard Art. no. 461.025.00.1 49 Geberit GIS System walls Panellings Geberit aqua panel Plus Technical data 60
18 Weight 12 kg Material Plasterboard Art. no. 461.058.00.1 130 Geberit GIS panel for washbasin 60 Application purposes • For single-layer, vertical panelling of Geberit GIS support systems • For single-layer panelling of Geberit Duofix system walls • For areas exposed to high amounts of moisture • For utilisation in the moisture load classes 0, A0 and A1 (range regulated by building authorities) Characteristics • Cement-bonded mineral structural panel • Water-resistant • Without mineral fibers • Building material class A1, non-combustible, in accordance with DIN 4102 Technical data Weight Calcium silicate Art. no. 461.163.00.1 130 Application purposes • For single-layer panelling of Geberit GIS elements for washbasin in GIS support system • For use in the installation of Geberit GIS support systems on unfinished floors Characteristics • Impregnated • Environmentally compatible • Non-combustible • Pre-drilled for washbasin connections 9 kg Mater
ial 18 P Technical data Material Geberit GIS panel for wall-hung WC, for Sigma concealed cisterns 12 cm 60 Plasterboard Art. no. 461.074.00.1 18 Geberit panel screw 130 Application purposes • For single-layer panelling of Geberit GIS elements for wall-hung WC in GIS support system • For use in the installation of Geberit GIS support systems on finished floors • For use in the moisture load classes 0 and A01 Characteristics • Impregnated • Environmentally compatible • Pre-drilled for wall-mounted WC connections • Cutout section available for Geberit Sigma concealed cistern 12 cm service opening • Building material class A2, non-combustible, in accordance with DIN 4102 50 Application purposes • For fastening Geberit panels and Geberit aqua panels Plus to Geberit Duofix system walls and Geberit GIS support systems Characteristics • Self-tapping screw, 4.2 x 35 mm • Self-tapping thread • Steel, hardened and phosphatised • Flared head with crosshead Phil
lips PH 2 Art. no. 461.030.00.1 Geberit GIS Elements for WCs Installation elements Geberit filler Geberit panel screw, in magazine Application purposes • For fastening Geberit panels and Geberit aqua panels Plus to Geberit Duofix system walls and Geberit GIS support systems • For quick-fit auto-feed screwdriver Application purposes • For filling Geberit panels and Geberit aqua panels Plus without stripe in areas exposed to moderate or high amounts of moisture Characteristics • Self-tapping screw, 4.2 x 35 mm • Self-tapping thread • Steel, hardened and phosphatised • Flared head with crosshead Phillips PH 2 • Plastic magazine for 50 panel screws Characteristics • Impregnated • Environmentally compatible • Powdery Art. no. 461.031.00.1 Art. no. 464.015.00.1 3.2 Installation elements 3.2.1 Elements for WCs Accessory overview: Geberit GIS elements for WCs Actuator plates of the Sigma series Actuator plates of the Omega series Set of support brackets for
WC ceramic appliances with small contact surfaces Concealed outlet for drywall and solid wall construction → p. 70 → p. 82 → p. 43 → p. 281 ü ü ü ü ü ü 461.311.00.5 Element for wall-hung WC, 114 cm, with Sigma ü concealed cistern 12 cm 461.141.00.1 Element for wall-hung WC, 87 cm, with Omega ü concealed cistern 12 cm 461.206.00.1 Element for wall-hung WC, 95 cm, close-coupled WC 51 Geberit GIS Installation elements Elements for WCs Geberit GIS element for wall-hung WC, 114 cm, with Sigma concealed cistern 12 cm Geberit GIS element for wall-hung WC, 87 cm, with Omega concealed cistern 12 cm ≥ 165 (DN 90) ≥ 195 (DN 100) 424 R½ ≥ 205 424 114 100 45 100 87−91 R½ 18/23 5 5 1045 100 75 18/23 +2 41 −1 ≤ 70 5 5 9 23 +2 22 0 40 −1 0 9−135 195 32 0 0−20 76 0−20 ≥ 30 0 195 ≥ 30 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall
• Suitable for barrier-free construction • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • Suitable for wall-hung WCs with projection up to 70 cm • For single flush, dual flush or stop-and-go flush • For floor constructions 0–20 cm Application purposes • For installation in Geberit GIS support systems for part-height prewall or free-standing wall • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • For dual flush • For floor constructions 0–20 cm Characteristics • Frame, zinc-plated, with four quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with front actuation, fully insulated against condensation • Immedia
te post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection on the rear or at the top centre • Protection box for service opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Characteristics • Frame, zinc-plated, with four quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service
opening can be cut to length • Equipped with conduit pipe for feed pipe for connection of Geberit AquaClean shower toilets Technical data Technical data 9−135 Flow pressure 0.1-10 bar Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 4 protective plugs with punching tip • 2 threaded rods M12 • Fastening material Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve a
nd hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend 90° made of PE-HD, ø 90 mm • Adapter socket made of PE-HD, ø 90/110 mm • 4 protective plugs with punching tip • 2 threaded rods M12 • Fastening material Art. no. Art. no. 461.311.00.5 461.141.00.1 Accessories • Accessory overview: Geberit GIS elements for WCs → p. 51 • 52 Actuator plate has to be ordered separately Accessories • Accessory overview: Geberit GIS elements for WCs → p. 51 • Actuator plate has to be ordered separately Geberit GIS Elements for washbasins Installation elements 3.2.2 Elements for washbasins Geberit GIS element for wall-hung WC, 95 cm, close-coupled WC 424 Geberit GIS washbasin set for deck-mounted tap min.165 (DN 90) min.185 (DN 100) 755-86 min.95 248 18/23 37 15 76 802 76 23 7 0 41 153 0-20 0 0-20 9-135 Application purposes • For installation in Geberit GIS support systems for prewall, partition w
all or free-standing wall • Suitable for barrier-free construction • For wall-hung WCs with connection dimensions in accordance with EN 33:2011 • Suitable for wall-hung WCs with projection up to 70 cm • For mounting of close-coupled WCs • For floor constructions 0–20 cm Characteristics • Frame, zinc-plated, with four quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Frame prepared for support brackets for WC ceramic appliances with small contact surfaces • Connection bend can be mounted without tools at different depths, adjustable range 45 mm • Fastening for connection bend, sound-absorbing • Crossbar for tap, height-adjustable Scope of delivery • Elbow tap connector R 1/2, compatible with MeplaFix • Sealing washer • 3 protective plugs with punching tip • 2 threaded rods M12 • Fastening material Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing
wall • For installation of washbasins • For deck-mounted taps Characteristics • Crossbar, zinc-plated, with two quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Standard washbasin fastening distance 28 cm, adjustable with the Geberit GIS structure • Fastening for connection bend, sound-absorbing Scope of delivery • 2 elbow tap connectors R 1/2 • 2 sound insulation bases • 2 insulating sleeves • 5 protective plugs with punching tip • 2 sealing washers • Connection bend made of PE-HD, ø 50 mm, extended • Seal, ø 44/32 mm • 2 mounting clips M10 • 2 threaded rods M10 • Fastening material Art. no. 461.430.00.1 Art. no. 461.206.00.1 Accessories • Accessory overview: Geberit GIS elements for WCs → p. 51 53 Geberit GIS Installation elements Elements for bidets 3.2.3 Elements for bidets Geberit GIS element for bidet, Universal 4 50 8-38 18/23 350 330 310 290 270 250 230 210 190 170 150 130 110 90 360 340
320 300 280 260 240 220 200 180 160 140 120 100 80 964.162.00.0 69 110 130 150 170 190 210 230 250 270 290 310 330 350 8090100 120 140 160 180 200 220 240 260 280 300 320 340 360 964.161.00.0 0 0 0-20 0-20 10 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • For wall-hung bidets with deck-mounted tap • For floor constructions 0–20 cm Characteristics • Frame, zinc-plated, with four quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Fastening distance for wall-hung bidet 18 or 23 cm, bidet fastening height-adjustable • Fastening for connection bend, height-adjustable and soundabsorbing • Tap attachments adjustable in width and height Scope of delivery • 2 elbow tap connectors R 1/2, compatible with MeplaFix • 2 sealing washers • 2 sound insulation bases • 2 insulating sleeves • 3 protective plugs with punching tip • Connection bend made of
PE-HD, ø 50 mm • Seal, ø 44/32 mm • 2 threaded rods M12 • Fastening material Art. no. 461.530.00.1 3.2.4 Elements for urinals Accessory overview: Geberit GIS elements for urinals Urinal flush controls with electronic flush actuation, battery operation Element for urinal, 114 cm, Universal Urinal flush controls with pneumatic flush actuation Urinal flush control with electronic flush actuation, mains operation, hidden, Universal Inlet crossbar for urinal, with spray head → p. 174 461.621.00.1 Urinal flush controls with electronic flush actuation, mains operation → p. 178 → p. 182 → p. 174 → p. 42 ü ü ü ü 461.689.00.1 Element for urinal, 114–132 cm, Universal, for hidden urinal control 54 ü ü Geberit GIS Elements for urinals Installation elements Geberit GIS element for urinal, 114–132 cm, Universal, for hidden urinal control 42 Geberit GIS element for urinal, 114 cm, Universal 75 42 9 9-29 R1/2 75-33 100 109-127 7 min. 114 R
1/2 17-37 min. 9 max. 81 min. 31 10 100-118 100 max. 65 109-127 75-33 0 0 0 0-20 0-20 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • For Geberit urinal flush controls for covered installation, vandal-resistant • For floor constructions 0–20 cm Characteristics • Frame, zinc-plated, with four quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Stop valve with throttle pre-mounted • Service opening behind urinal • Flexible flush hose with guide and integrated check valve • Equipped with conduit pipe to connect the sensor in the trap to the urinal flush control • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools • Can be retrofitted with accessories to fit urinal
s with spray head 0 0 - 20 0 - 20 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • For floor constructions 0–20 cm Characteristics • Frame, zinc-plated, with four quick-action fasteners • Infinitely variable height adjustment in Geberit GIS structure • Stop valve with throttle pre-mounted • Fastening for inlet ø 32 mm, height-adjustable • Fastening for connection bend, height-adjustable and sound-absorbing • Urinal fasteners M8 width- and height-adjustable • Crossbars with centring marks, adjustable without tools • Can be retrofitted with accessories to fit urinals with spray head Technical data Flow pressure 1-8 bar Maximum test pressure water 16 bar Maximum test pressure air / inert gas 3 bar Flow rate at 1 bar without flow limiter 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Elbow tap connector R 1/2 • Protection box with cover • Connecti
on pipe between inlet ø 32 mm and urinal, with seal to urinal • 1 protection plug • Connection bend made of PE-HD, ø 50/63 mm • Protective cap • Urinal trap ø 50 mm, with seal on urinal • 2 threaded rods M8 • Fastening material Art. no. 1-8 bar Maximum test pressure water 16 bar Maximum test pressure air / inert gas 3 bar Flow rate at 1 bar without flow limiter Technical data Flow pressure 0.3 l/s Flow rate at 1 bar with flow limiter 0.24 l/s Scope of delivery • Elbow tap connector R 1/2 • Protection box with cover • Connection pipe between inlet ø 32 mm and urinal, with seal to urinal • 1 protection plug • Connection bend made of PE-HD, ø 63/50 mm • Protective cap • Seal, ø 57/50 mm • Urinal trap ø 50 mm, with seal on urinal • 2 threaded rods M8 • Fastening material Art. no. 461.621.00.1 Accessories • Accessory overview: Geberit GIS elements for urinals → p. 54 461.689.00.1 Accessories • Accessory overview: Geberit GIS elemen
ts for urinals → p. 54 55 Geberit GIS Installation elements Elements for taps and devices 3.2.5 Elements for taps and devices Geberit GIS crossbar for wall-mounted tap, surface-mounted, 153 mm, for two water supply connections 248 Geberit GIS mounting plate for concealed base units HANSAVAROX and iBox 37 77 15 153 125 76 2 76 38 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • For connecting surface-mounted taps with gauge for bore holes 15.3 cm • For connecting surface-mounted taps with gauge for bore holes 7.6 cm Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • For installation of concealed base units HANSAVAROX and iBox Characteristics • Infinitely variable height adjustment in Geberit GIS structure • Crossbar, zinc-plated, with four quick-action fasteners Art. no. Characteristics • Infinitely variable
height adjustment in Geberit GIS structure • Crossbar, zinc-plated, with two quick-action fasteners 461.178.00.1 3.2.6 Elements for loads Scope of delivery • 2 protective plugs with punching tip • 2 sealing washers • 2 sound insulation bases • Fastening material Geberit GIS mounting plate Universal, 31 x 58 cm 3 308 Art. no. 461.038.00.1 578 Geberit GIS mounting plate for concealed stop valves, 270 mm 5 153 115 12 7 27 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • For fastening Geberit concealed stop valves Characteristics • Infinitely variable height adjustment in Geberit GIS structure • Crossbar, zinc-plated, with two quick-action fasteners 13 5 Application purposes • For installation in Geberit GIS support systems for prewall, partition wall or free-standing wall • Suitable for barrier-free construction • For fastening support handles • For fastening urinal divisions,
shower partition walls and wall cabinets Characteristics • Mounting plate made of veneered wood, waterproof bonded • Can be divided into two smaller mounting plates • Can be mounted vertically and horizontally • All-round cutout suitable for Geberit GIS profile Technical data Art. no. Material 461.072.00.1 Accessories • Geberit Mepla concealed stop valve with cover collar and fastening • Geberit concealed stop valve with cover collar and fastening 56 Art. no. 461.035.00.1 Wood Geberit GIS Accessories Accessories 3.2.7 Accessories 3.3 Accessories Geberit retrofit adapter for inlet Rp 1/2, urinal 3.3.1 For system walls G1/2 54 Geberit GIS installation kit for free-standing system wall 10-17 26 73 28 Application purposes • For retrofitting installed Geberit Duofix elements for urinal with inlet ø 32 mm to inlet Rp 1/2“ 20 Art. no. 242.309.00.1 Geberit sound insulation set for wall-hung WC s 40 42 Application purposes • For making free-standin
g Geberit GIS support systems more rigid Characteristics • Zinc-plated Technical data Material Application purposes • For structure-borne sound insulation of WCs and bidets • For WCs and bidets with fastening distance 18 or 23 cm Characteristics • White Technical data PE-E Scope of delivery • 2 washers • 2 sound insulation sleeves • Sound insulation mat 156.050.00.1 Scope of delivery • 2 support brackets, pre-mounted, zinc-plated • 2 heavy-duty dowels • 4 ratchet pins • 2 screws M8 • 6 nuts M8 Art. no. Material Art. no. Steel 461.660.00.1 Geberit GIS installation kit for service flap s [mm] 6 Application purposes • For creating service openings in Geberit GIS walls Characteristics • Size of service opening 15 x 15 cm, can be enlarged to 0.5 m² • Minimum tile size 15 x 15 cm Technical data Material Steel Scope of delivery • 2 pair fixing devices with safety catch • 2 joint angles with adjustable magnets • 2 contact plates • Pull cord t
o open • Silicone adhesive Art. no. 461.043.00.1 57 Geberit GIS Accessories For system walls Geberit GIS mounting clip Geberit GIS installation kit for service door M10 33 25 27 2 SW13 M10 5 Application purposes • For fastening threaded rods to Geberit GIS profiles • For fastening installation parts and sanitary appliances to Geberit GIS profiles Characteristics • Zinc-plated • Thread M10 Application purposes • For creating service openings in Geberit GIS walls Characteristics • Size of service opening 20 x 20 cm to 50 x 100 cm • Minimum tile size 20 x 20 cm Technical data Material Steel Scope of delivery • 4 connection elements • 2 hinge holders • Pressure opener • Silicone adhesive Scope of delivery • 1 protective plug with punching tip • Fastening screw Art. no. 461.004.00.1 Art. no. 461.044.00.1 Geberit GIS ratchet pin 2 SW 4 M8 16 SW 13 Geberit heavy-duty dowel 86 M8 Application purposes • For fastening Geberit GIS installation
elements on the structure • For creating additional fastenings on Geberit GIS profiles Characteristics • Zinc-plated • Thread M8 461.006.00.1 Technical data Material Geberit void dowel, metal Ø 11 76 Application purposes • For fastening Geberit GIS mounting brackets to panels with panelling thickness of 18–25 mm • For fastening Geberit Duofix system rails to panels with panelling thicknesses of 18–25 mm Characteristics • Zinc-plated Technical data Art. no. 465.029.00.1 58 Art. no. 461.037.26.1 M6 Scope of delivery • Screw M6 Application purposes • For fastening Geberit GIS mounting brackets and GIS installation kits for free-standing GIS walls on the unfinished building structure (concrete) • For fastening Geberit Duofix installation elements with large, reinforced foot plates to the rough building structure (concrete) Characteristics • Zinc-plated Art. no. Material 08 M8 17 Steel Steel Geberit GIS For supply systems Accessories 3.3.2 Fo
r supply systems Geberit GIS wall fixation 10 135-26 Geberit GIS pipe clip for supply pipes 5 205 Application purposes • For bracing and fastening Geberit GIS support systems to the building structure 5 Application purposes • For fastening supply pipes to Geberit GIS support systems • For Geberit Mepla system pipes, ML, ø 16–32 mm Characteristics • Pre-mounted parts made of die-cast zinc • With two quick-action fasteners • Infinitely variable hand adjustment Characteristics • Adjustable, ø 16–40 mm Technical data Material Die-cast zinc Art. no. Scope of delivery • Fastening material 461.070.00.1 Art. no. 3.3.3 For drainage systems 461.015.00.1 Geberit GIS pipe bracket for discharge pipe Geberit GIS sound insulation tape 30 m 03 5 1 5 Application purposes • For structure-borne sound decoupling between panels and building structure • For avoiding uncontrollable formation of cracks d Application purposes • For fastening discharge pipes
made of plastic to the Geberit GIS support system Characteristics • Single-sided self-adhesive • Permanently elastic • Vinyl foam tape • Closed-cell Art. no. 50 / 56 50 - 56 364.052.00.1 60 63 365.050.00.1 461.036.00.1 d, ø [mm] 363.050.00.1 Art. no. DN 70 75 366.050.00.1 Sound insulating panel for Geberit GIS mounting bracket 90 90 367.050.00.1 100 110 7 05 5 Application purposes • For structure-borne sound decoupling between Geberit GIS support systems and the building structure Characteristics • Self-adhesive Technical data Material Cork Art. no. 461.014.00.1 59 Geberit Concealed Cisterns 4. Geberit Concealed Cisterns 4.1 Sigma concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 4.2 Omega concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 4.3 Delta concealed cisterns . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 65 4.4 Flush pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 4.5 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 61 Geberit Concealed Cisterns Sigma concealed cisterns 4.1 Sigma concealed cisterns Geberit Sigma concealed cistern 8 cm, 6 / 3 litres Geberit Sigma concealed cistern 12 cm, 6 / 3 litres 12 44 41 2-9 R1/2 8 505 1–5 8 100 R1/2 100 87 87 110 110 235 845 51 595 41 108 23 67–82 1045 365 135 8 0 max.–15 X 0 0 0 30 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For floor-standing and wall-hung WCs • For single flush, dual flush or stop-and-go flush Characteristics • Concealed cistern with front actu
ation, fully insulated against condensation • Immediate post flush possible with factory setting • Flush bend fitted • Tool-free installation and maintenance work on concealed cistern • Water supply connection on the rear or at the top centre • Protection box for service opening can be cut to length Technical data Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For floor-standing WCs • For single flush, dual flush or stop-and-go flush Characteristics • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Flush bend fitted • Flush bend adjustable 2 cm upwards and 1 cm downwards • Tool-free installation and maintenance work on concealed cistern • Water supply connection at the top, offset to left side • Protection box for service opening can be cut to length Flow
pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flow pressure 0.1-10 bar Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume factory setting 6 and 3 l Flush volume small adjustment range 3-4 l Flush volume large adjustment range 6/9l Flush volume small 3l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Flush bend with recess shells • 1 protection plug • 2 slotted flat irons • 2 fixing brackets • Fastening material Art. no. 109.300.00.5 Technical data Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Flush bend with recess shells • Flush bend extension, ø 45 mm • 1 protection plug • 2 slotted flat irons • Direct plastering netting • Fastening material Art. no. 109.771.00.1 • Actuator p
late has to be ordered separately • 62 Actuator plate has to be ordered separately Geberit Concealed Cisterns Omega concealed cisterns 4.2 Omega concealed cisterns Geberit Omega concealed cistern 12 cm, 6 / 3 litres, installation height 82 cm, with top or front actuation ≥3 416 ≥ 15 12 Geberit Omega concealed cistern 12 cm, 6 / 3 litres, installation height 98 cm, with top or front actuation ≥ 15 12 12 2–9 45 416 9 R½ ≥3 44 2–9 45 9 R½ 395 12 335 395 X 486 0 0 X ≥ 30 0 Application purposes • For masonry walls • For installation in part-height prewall installations • For floor-standing and wall-hung WCs • For dual flush Characteristics • Adjustable in depth • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Flush bend welded • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on re
ar left • Protection box for service opening can be cut to length Technical data 0 ≥ 30 Application purposes • For masonry walls • For installation in part-height prewall installations • For floor-standing and wall-hung WCs • For dual flush Characteristics • Concealed cistern with top or front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Flush bend welded • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flow pressure 0.1-10 bar Flush volume small adjustment range 3-4 l Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2,
compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Flush bend extension, ø 45 mm • 1 protection plug • 2 fixing brackets • Fastening material Art. no. 109.043.00.1 Technical data Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend,ø 90/110 mm • 2 protection plugs • 2 fixing brackets • Fastening material Art. no. 109.050.00.1 • Actuator plate has to be ordered separately • Actuator plate has to be ordered separately 63 Geberit Concealed Cisterns Omega concealed cisterns N ew Geberit Omega concealed cistern 12 cm, 6 / 3 litres, installation height 106 cm, with front actuation 44 45 416 ≥ 12 R½ 12 395 9 575 X 0 0 ≥ 30 Application purposes • For masonry walls • For installation in part- or room-height prewall in
stallations • For installation in room-height installation walls • For floor-standing and wall-hung WCs • For dual flush Characteristics • Concealed cistern with front actuation, fully insulated against condensation • Immediate post flush possible with factory setting • Flush bend welded • Tool-free installation and maintenance work on concealed cistern • Water supply connection left or on rear left • Protection box for service opening can be cut to length Technical data Flow pressure 0.1-10 bar Flush volume factory setting 6 and 3 l Flush volume large adjustment range 4.5 / 6 / 7.5 l Flush volume small adjustment range 3-4 l Scope of delivery • Water supply connection R 1/2, compatible with MeplaFix, with integrated angle stop valve and hand wheel • Protection box for service opening • Connection set for WC, ø 90 mm • Connection bend,ø 90/110 mm • 2 protection plugs • 2 fixing brackets • Fastening material Art. no. 109.060.00.1 • 64 Actua
tor plate has to be ordered separately Geberit Concealed Cisterns Delta concealed cisterns 4.3 Delta concealed cisterns Geberit Delta concealed cistern 12 cm, 9 / 4 litres 12 44 41 R1/2 Geberit Delta concealed cistern 8 cm, 9 / 3 litres 8 45 R1/2 1-6 1015-119 1-6 985-1155 985-1155 134 134 1015-119 25 86-1035 85 595 535 -175 111-1285 365 -175 41 105 365 0 85 -17 41 -16 0 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For floor-standing and wall-hung WCs • For single flush, dual flush or stop-and-go flush Characteristics • Concealed cistern with front actuation, fully insulated against condensation • Flush bend fitted • Water supply connection on the rear or at the top centre • Connection hose on angle stop valve can be attached without tools Technical data Flow pressure 0.1-10 bar Flush volume factory setting 9 and 4 l Flush vo
lume large adjustment range 6/9l Flush volume small adjustment range 3-4 l Scope of delivery • Angle stop valve R 1/2, compatible with MeplaFix, with adapter ring • Protection box for service opening • 2 distance bolts • Flush bend with recess shells • Flush bend extension, ø 45 mm • 1 protection plug • 2 slotted flat irons • 2 fixing brackets • Fastening material Art. no. 109.160.00.1 • Actuator plate has to be ordered separately 0 0 Application purposes • For masonry walls • For installation in part- or room-height prewall installations • For installation in room-height installation walls • For floor-standing and wall-hung WCs • For single flush, dual flush or stop-and-go flush Characteristics • Concealed cistern with front actuation • Flush bend fitted • Water supply connection at the top centre • Connection hose on angle stop valve can be attached without tools Technical data Flow pressure 0.1-10 bar Flush volume factory setting 9
and 3 l Flush volume large adjustment range 6/9l Flush volume small 3l Scope of delivery • Angle stop valve R 1/2, compatible with MeplaFix, with adapter ring • Protection box for service opening • 2 distance bolts • Flush bend with recess shells • Flush bend extension, ø 45 mm • 1 protection plug • 4 slotted flat irons • Direct plastering netting • Fastening material Art. no. 109.130.00.1 • Actuator plate has to be ordered separately 65 Geberit Concealed Cisterns Flush pipes 4.4 Flush pipes 4.5 Accessories Geberit flush bend set 90°, telescopic Geberit flush bend extension set with collar d d1 d 85 8 d1 L Art. no. A Application purposes • For connecting concealed cisterns with a WC ceramic appliance Characteristics • Can be pulled out Technical data Material PE-HD Scope of delivery • Flush pipe • Recess shells • 1 protection plug d, ø [mm] d1, ø [mm] A [cm] L [cm] X [cm] 56 45 9.5 6.5 112 Geberit flush bend extension
set with collar d1 d 12 di d1 8 25 35 Application purposes • For height adjustment of flush pipe connections (2 cm upwards and 1 cm downwards) • For connecting flush bends and WCs Scope of delivery • Sleeve made of EPDM • Collar, oval • Ring seal socket • Flush pipe Art. no. Colour / Surface 118.221.11.1 118.221.21.1 66 25 Scope of delivery • Ring seal socket • Collar • Flush pipe • Sleeve made of EPDM, ø 44/55 mm 7 119.698.16.1 35 Application purposes • For connecting flush bends and WCs X Art. no. d2 d1 d, ø [mm] d1, ø [mm] di, ø [mm] white alpine 45 40 44 bright chrome-plated 45 40 44 Colour / Surface d, ø [mm] d1, ø [mm] d2, ø [mm] 118.026.11.1 white alpine 44 40 55 118.026.21.1 bright chrome-plated 44 40 55 Geberit Concealed Cisterns Accessories 67 Geberit Actuator Plates and WC Flush Controls 5. Geberit Actuator Plates and WC Flush Controls 5.1 Actuator plates . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 5.1.1 5.1.4 For Sigma concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Assortment overview: Geberit actuator plates of the Sigma series for concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Overview: Range of colours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 For Omega concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Assortment overview: Geberit actuator plates of the Omega series for concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 For Delta concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Assor
tment overview: Geberit actuator plates of the Delta series for concealed cisterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 5.2 WC flush controls with electronic flush actuation. . . . . . . . . . . . . . . . . . . . . . . 90 5.2.1 5.2.2 5.2.3 Assortment overview: Geberit WC flush controls with electronic flush actuation, touchless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Assortment overview: Geberit WC flush controls with electronic flush actuation, manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 For mains operation, for Geberit Sigma concealed cisterns 12 cm . . . . . . . . . .93 For mains operation, for Geberit Sigma c
oncealed cisterns 8 cm . . . . . . . . . . .98 For battery operation, for Geberit Sigma concealed cisterns 12 cm . . . . . . . . .99 5.3 WC flush controls with pneumatic flush actuation . . . . . . . . . . . . . . . . . . . . . 102 5.3.1 5.3.2 System overview: pneumatie flush actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 For dual flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 For single flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 5.4 Accessories for flush controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 5.4.1 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 5.1.2 5.1.3 69 Geberit Actuator Plates and WC Flush Controls Actuator plates For Sigma co
ncealed cisterns 5.1 Actuator plates 5.1.1 For Sigma concealed cisterns Assortment overview: Geberit actuator plates of the Sigma series for concealed cisterns Sigma01 Sigma10 Sigma20 Sigma40 Sigma50 → p. 73 → p. 73 → p. 74 → p. 75 → p. 76 109.300.00.5 ü ü ü ü 109.771.00.1 ü ü ü ü 111.300.00.5 ü ü ü ü 111.370.00.5 ü ü ü 111.390.00.5 ü ü ü ü 111.726.00.1 ü ü ü ü Concealed cistern Duofix ü ü ü Compatible 70 ü ü ü ü ü ü ü ü 110.340.00.5 ü ü ü ü 110.772.00.1 Kombifix 461.311.00.5 110.350.00.5 GIS ü ü ü ü Geberit Actuator Plates and WC Flush Controls For Sigma concealed cisterns Actuator plates Sigma70 Sigma70 for Sigma concealed cistern 8 cm Sigma80 Sigma80 for Sigma concealed cistern 8 cm Tango Bolero Mambo → p. 78 → p. 78 → p. 95 → p. 98 → p. 79 → p. 79 → p. 80 ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü
ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü 71 Geberit Actuator Plates and WC Flush Controls Actuator plates For Sigma concealed cisterns Overview: Range of colours Colour 11 KQ white alpine DW KR jet black RAL 9005 Glass SE green glass satinised SD smoked glass reflective SI SQ umber glass SJ SG white glass black glass Metal SM Metallic finished 00 stainless steel glass reflective 21 bright chrome-plated 00 customised* gold-plated DT special brass galvanized FW stainless steel brushed bright chrome / matt chrome / bright chrome matt chrome-plated palladium-plated matt KA bright chrome / matt chrome KJ white / bright chrome / white KL white / matt chrome / matt chrome 46 HC KH GH brushed chrome 45 white / gold-plated / white KM black / bright chrome / black KK KN matt chrome / bright chrome / matt chrome SN stainless steel brushed / polished / brushed *The
inlay is not supplied by Geberit 72 Geberit Actuator Plates and WC Flush Controls For Sigma concealed cisterns Actuator plates Geberit actuator plate Sigma01 for dual flush 246 13 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. special brass galvanized 115.770.DW.5 jet black RAL 9005 115.770.KA.5 Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods matt chrome-plated 115.770.DT.5 Plastic bright chrome-plated 115.770.46.5 < 20 N Material white alpine 115.770.21.5 Actuation force Colour / Surface 115.770.11.5 Technical data bright chrome / matt chrome Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 Geberit actuator plate Sigma10 for stop-and-go flush 246 14 164 Application purposes • For flush actuation with Geberit Sigma c
oncealed cisterns Technical data Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Scope of delivery • Mounting frame • 2 distance bolts • Actuator rod • Stop-and-go lever Actuation force Art. no. Colour / Surface Material designation 115.758.KH.5 bright chrome / matt chrome / bright chrome Plastic 115.758.KJ.5 white / bright chrome / white Plastic 115.758.KK.5 white / gold-plated / white Plastic 115.758.KL.5 white / matt chrome / white Plastic 115.758.KM.5 black / bright chrome / black Plastic 115.758.KN.5 matt chrome / bright chrome / matt chrome Plastic 115.758.SN.5 stainless steel brushed/polished/brushed < 20 N Stainless steel Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 73 Geberit Actuator Plates and WC Flush Controls Actuator plates For Sigma concealed cisterns Geberit actuator plate Sigma10 for stop-and-go flush, screwable 24
6 15 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. Actuation force < 20 N Material Stainless steel Scope of delivery • Mounting frame • 2 distance bolts • Actuator rod • Stop-and-go lever • Set of bolts Colour / Surface 115.787.SN.5 Technical data stainless steel brushed/polished/brushed Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 Geberit actuator plate Sigma20 for dual flush 246 11 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Technical data Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods Actuation force Art. no. Colour / Surface Material designation 115.778.KH.1 bright chro
me / matt chrome / bright chrome Plastic 115.778.KJ.1 white / bright chrome / white Plastic 115.778.KK.1 white / gold-plated / white Plastic 115.778.KL.1 white / matt chrome / white Plastic 115.778.KM.1 black / bright chrome / black Plastic 115.778.KN.1 matt chrome / bright chrome / matt chrome Plastic 115.778.SN.1 stainless steel brushed/polished/brushed Stainless steel Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 74 < 20 N Geberit Actuator Plates and WC Flush Controls For Sigma concealed cisterns Actuator plates Geberit actuator plate Sigma20 for dual flush, screwable 246 11 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Technical data Actuation force Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. Stainless steel Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rod
s • Set of bolts Colour / Surface 115.781.SN.1 < 20 N Material stainless steel brushed/polished/brushed Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 Geberit actuator plate Sigma40 for dual flush, with integrated odour extraction unit 266 22 2−45 (6) 182 Application purposes • For flush actuation with Geberit Sigma concealed cisterns 12 cm with odour extraction adapter recirculating air • For direct odour extraction from WC ceramic appliances • For adding in-cistern blocks without chlorine or oxidising components Technical data III Protection degree IPX4 Nominal voltage 230 V AC Mains frequency 50 Hz Operating voltage Characteristics • Front actuation • Surface of actuator buttons made of aluminium brushed • Sound-absorbing actuator rods, tool-free fast adjustment • Odour extraction unit with filtration, integrated in the concealed cistern • Extraction unit can be mounted without too
ls • LED display for filter replacement • Odour neutralisation with active carbon filter • Push-button for switching the odour extraction unit on and off • Automatic switching off of the odour extraction unit after 10 min • Active carbon filter can be replaced without tools • In-cistern blocks can be inserted without tools Protection class 12 V DC Power consumption 3W Actuation force < 20 N Scope of delivery • Mounting frame with swivelling mechanism • 2 distance bolts • 2 actuator rods • Protection plate • Extraction unit with radial fan • Power supply unit with LED display • Cable connection with plug • Active carbon filter, type 1 • Receptacle for in-cistern block • Moisture protection for conduit pipe Art. no. Colour / Surface Material designation 115.600.KQ.1 white alpine Plastic 115.600.KR.1 jet black RAL 9005 Plastic 115.600.SI.1 white glass Glass 115.600.SJ.1 black glass Glass 115.600.SQ.1 umber glass Glass Accessories â
€¢ Geberit active carbon filter type 1 → p. 76 75 Geberit Actuator Plates and WC Flush Controls Actuator plates For Sigma concealed cisterns Geberit active carbon filter type 1 Application purposes • For Geberit actuator plates Sigma40 with integrated odour extraction unit Art. no. 242.555.00.1 Geberit actuator plate Sigma50 for dual flush a 246 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Technical data Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods Art. no. Actuation force < 20 N Colour / Surface Material designation a [cm] 115.788.00.5 customised Die-cast zinc 0.96 115.788.11.5 white alpine Die-cast zinc / plastic 1.26 115.788.DW.5 jet black RAL 9005 Die-cast zinc / plastic 1.26 115.788.GH.5 brushed chrome Die-cast zinc / brass 1.16 115.788.SD.5 smoked glass reflective Die-ca
st zinc / glass 1.36 115.788.SE.5 green glass satinised Die-cast zinc / glass 1.36 115.788.SQ.5 umber glass Die-cast zinc / glass 1.36 Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 • Customised solution without inlay, must be sourced localy Geberit actuator plate Sigma50 for dual flush, customer specific 246 14 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns • For individual bathroom design Characteristics • Surface is provided and completed by customer • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Technical data Actuation force 76 < 20 N Geberit Actuator Plates and WC Flush Controls For Sigma concealed cisterns Actuator plates Material Die-cast zinc Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods Art. no. Colour / Surface 115.788.00.1 customised Accessories • Extension set for Geberi
t Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 • Customised solution without inlay, must be sourced localy Geberit actuator plate Sigma60 for dual flush 221 06−18 18−6 139 Application purposes • For flush actuation with Geberit Sigma concealed cisterns 8 cm • For flush actuation with Geberit Sigma concealed cisterns 12 cm Characteristics • Front actuation • Surface-even actuation • Tile structure 6–18 mm • Suitable for covering and roughcast thicknesses of at least 18 mm • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. Material Die-cast zinc Scope of delivery • Protection box for service opening • Installation frame with compensation frame • 2 actuator rods • Protection plate • Fastening material Colour / Surface 115.792.GH.1 Technical data brushed chrome Cover frame for Geberit actuator plate Sigma60 06 15 164 246 Application purposes • For Geberit actuator plates Sigma60 • For covering un
finished tile edges Art. no. Material Die-cast zinc Colour / Surface 242.544.GH.1 Technical data brushed chrome 77 Geberit Actuator Plates and WC Flush Controls Actuator plates For Sigma concealed cisterns N ew Geberit actuator plate Sigma70 for dual flush, for Sigma concealed cistern 12 cm 24 04 158 11 Application purposes • For flush actuation with Geberit Sigma concealed cisterns 12 cm • For flush actuation with high actuating convenience Characteristics • Front actuation • Hydraulic servo lifter for minimum actuation forces • Flush actuation pneumatic • Can be installed without tools Scope of delivery • Hydraulic servo lifter • Water supply connection set • Protection plate • Mounting frame • 2 distance bolts • Assembly parts Art. no. Colour / Surface 115.620.00.1 customised 115.620.FW.1 stainless steel brushed Stainless steel 115.620.SI.1 white glass Glass 115.620.SJ.1 black glass Glass 115.620.SQ.1 umber glass Glass • Ma
terial designation Customised solution without inlay, must be sourced localy N ew Geberit actuator plate Sigma70 for dual flush, for Sigma concealed cistern 8 cm 24 04 158 11 Application purposes • For flush actuation with Geberit Sigma concealed cisterns 8 cm • For flush actuation with high actuating convenience Characteristics • Front actuation • Hydraulic servo lifter for minimum actuation forces • Flush actuation pneumatic • Can be installed without tools Scope of delivery • Hydraulic servo lifter • Water supply connection set • Protection plate • Mounting frame • 2 distance bolts • Assembly parts Art. no. Colour / Surface 115.625.00.1 customised 115.625.FW.1 stainless steel brushed Stainless steel 115.625.SI.1 white glass Glass 115.625.SJ.1 black glass Glass 115.625.SQ.1 umber glass Glass • 78 Customised solution without inlay, must be sourced localy Material designation Geberit Actuator Plates and WC Flush Controls For Sigma
concealed cisterns Actuator plates Geberit actuator plate Tango for stop-and-go flush, screwable 1 246 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. matt chrome-plated 115.760.DT.1 special brass galvanized 115.760.HC.1 palladium-plated matt 115.760.KA.1 Scope of delivery • Mounting frame • 2 distance bolts • Actuator rod • Stop-and-go lever • Set of bolts gold-plated 115.760.46.1 Die-cast zinc bright chrome-plated 115.760.45.1 < 20 N Material white alpine 115.760.21.1 Actuation force Colour / Surface 115.760.11.1 Technical data bright chrome / matt chrome Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 Geberit actuator plate Bolero for dual flush 246 14 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns
Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. special brass galvanized 115.777.DW.1 Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods matt chrome-plated 115.777.DT.1 Plastic bright chrome-plated 115.777.46.1 < 20 N Material white alpine 115.777.21.1 Actuation force Colour / Surface 115.777.11.1 Technical data jet black RAL 9005 Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 79 Geberit Actuator Plates and WC Flush Controls Actuator plates For Sigma concealed cisterns Geberit actuator plate Mambo for stop-and-go flush, screwable 246 25 164 Application purposes • For flush actuation with Geberit Sigma concealed cisterns Characteristics • Front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. Actuation force < 20 N Material Stainless steel Scope of delivery • Mounting fra
me • 2 distance bolts • Actuator rod • Stop-and-go lever • Set of bolts Colour / Surface 115.751.00.1 Technical data stainless steel brushed Accessories • Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns → p. 88 N ew Geberit cover plate Sigma, screwable 246 12 164 Application purposes • For covering the service opening in Geberit Sigma concealed cisterns Art. no. Colour / Surface 115.764.FW.1 Scope of delivery • Mounting frame • 2 distance bolts • Set of bolts stainless steel brushed N ew Geberit cover plate Sigma a 246 164 Application purposes • For covering the service opening in Geberit Sigma concealed cisterns Scope of delivery • Mounting frame • 2 distance bolts Art. no. Colour / Surface Material designation 115.766.00.1 customised Die-cast zinc 0.9 115.766.SI.1 white glass Die-cast zinc / glass 1.2 80 a [cm] Geberit Actuator Plates and WC Flush Controls For Sigma concealed cisterns
Actuator plates N ew Geberit cover plate Sigma a 246 164 Application purposes • For covering the service opening in Geberit Sigma concealed cisterns Technical data Material Plastic Scope of delivery • Mounting frame • 2 distance bolts Art. no. Colour / Surface a [cm] 115.768.11.1 white alpine 1.1 115.768.21.1 bright chrome-plated 1.1 115.768.46.1 matt chrome-plated 1.1 N ew Geberit cover plate Sigma, surface-even 213 22–95 18–8 131 04–15 Application purposes • For covering the service opening in Geberit Sigma concealed cisterns 12 cm • For individual bathroom design Characteristics • Surface is provided and completed by customer • Surface-even installation • Suitable for covering and roughcast thicknesses of 18–80 mm • Tile construction 4–15 mm Scope of delivery • Protection box for service opening • Protection plate • 2 spacers • 2 distance bolts Art. no. 115.698.00.1 Available as of June 2015 81 Geberit Actuator Plates
and WC Flush Controls Actuator plates For Omega concealed cisterns N ew Geberit cover plate Sigma, surface-even, with sight frame 213 28–9 18–8 131 1 Application purposes • For covering the service opening in Geberit Sigma concealed cisterns 12 cm • For individual bathroom design Characteristics • Surface is provided and completed by customer • Surface-even installation • Suitable for covering and roughcast thicknesses of 18–80 mm • Tile construction on cover with sight frame 10 mm • Sight frame for cover, bright chrome-plated Scope of delivery • Protection box for service opening • Protection plate • 2 spacers • 2 distance bolts Art. no. 115.699.00.1 Available as of June 2015 5.1.2 For Omega concealed cisterns Assortment overview: Geberit actuator plates of the Omega series for concealed cisterns Omega20 Omega30 Omega60 Cover plate Omega → p. 83 → p. 83 → p. 84 → p. 84 109.050.00.1 ü 82 ü ü 461.141.00.1 ü ü 110.011.00.1
ü 110.020.00.1 ü Compatible ü 111.030.00.1 110.001.00.1 Kombifix ü 111.060.00.1 GIS ü 111.003.00.1 Duofix 109.060.00.1 109.043.00.1 Concealed cistern ü Geberit Actuator Plates and WC Flush Controls For Omega concealed cisterns Actuator plates Geberit actuator plate Omega20 for dual flush 1 212 142 Application purposes • For flush actuation with Geberit Omega concealed cisterns white / gold-plated / white 115.085.KL.1 white / matt chrome / white 115.085.KM.1 black / bright chrome / black 115.085.KN.1 Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods • Fastening material white / bright chrome / white 115.085.KK.1 Plastic bright chrome / matt chrome / bright chrome 115.085.KJ.1 < 20 N Colour / Surface 115.085.KH.1 Actuation force Material Characteristics • Top/front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. Technical data matt chrome / bright chrome / matt chrome Geberit
actuator plate Omega30 for dual flush 1 212 142 Application purposes • For flush actuation with Geberit Omega concealed cisterns Characteristics • Top/front actuation • Sound-absorbing actuator rods, tool-free fast adjustment Art. no. black / bright chrome / black 115.080.KN.1 Scope of delivery • Mounting frame • 2 distance bolts • 2 actuator rods • Fastening material white / matt chrome / white 115.080.KM.1 Plastic white / gold-plated / white 115.080.KL.1 Material white / bright chrome / white 115.080.KK.1 < 20 N bright chrome / matt chrome / bright chrome 115.080.KJ.1 Actuation force Colour / Surface 115.080.KH.1 Technical data matt chrome / bright chrome / matt chrome 83 Geberit Actuator Plates and WC Flush Controls Actuator plates For Omega concealed cisterns Geberit actuator plate Omega60 for dual flush 24–90 184 114 Application purposes • For flush actuation with Geberit Omega concealed cisterns • For covering thicknesses of 24â
€“90 mm Characteristics • Top/front actuation • Surface-even actuation • Sound-absorbing actuator rods, tool-free fast adjustment Scope of delivery • Compensation frame • 2 spacers • 2 distance bolts • 2 actuator rods • Fastening material Art. no. Colour / Surface Material designation 115.081.GH.1 brushed chrome Die-cast zinc 115.081.SI.1 white glass Die-cast zinc / glass 115.081.SJ.1 black glass Die-cast zinc / glass 115.081.SQ.1 umber glass Die-cast zinc / glass Cover frame for Geberit actuator plate Omega60 209 05 139 Application purposes • For Geberit actuator plates Omega60 • For covering unfinished tile edges Art. no. Die-cast zinc bright chrome-plated 115.086.GH.1 Material Colour / Surface 115.086.21.1 Technical data brushed chrome Geberit cover plate Omega a 212 142 Application purposes • For covering the service opening in Geberit Omega concealed cisterns Scope of delivery • Mounting frame • 2 distance bolts Art. no.
Colour / Surface Material designation 115.082.00.1 customised Die-cast zinc 0.8 115.082.SI.1 white glass Die-cast zinc / glass 1.1 84 a [cm] Geberit Actuator Plates and WC Flush Controls For Omega concealed cisterns Actuator plates N ew Geberit cover plate Omega, surface-even 22–95 183 18–8 113 04–15 Application purposes • For individual bathroom design • For covering the service opening in Geberit Omega concealed cisterns Scope of delivery • Protection plate • 2 spacers • 2 distance bolts Characteristics • Surface is provided and completed by customer • Installation possible from the top/front • Surface-even installation • Suitable for covering and roughcast thicknesses of 18–80 mm • Tile construction 4–15 mm Art. no. 115.087.00.1 Available as of June 2015 N ew Geberit cover plate Omega, surface-even, with sight frame 28–9 183 18–8 113 1 Application purposes • For individual bathroom design • For covering the servic
e opening in Geberit Omega concealed cisterns Scope of delivery • Protection plate • 2 spacers • 2 distance bolts Characteristics • Surface is provided and completed by customer • Installation possible from the top/front • Surface-even installation • Suitable for covering and roughcast thicknesses of 18–80 mm • Tile construction on cover with sight frame 10 mm • Sight frame for cover, bright chrome-plated Art. no. 115.088.00.1 Available as of June 2015 85 Geberit Actuator Plates and WC Flush Controls Actuator plates For Delta concealed cisterns 5.1.3 For Delta concealed cisterns Assortment overview: Geberit actuator plates of the Delta series for concealed cisterns Delta21 Delta11 Delta50 Delta15 Cover plate Delta → p. 87 → p. 86 → p. 87 → p. 86 → p. 87 109.160.00.1 ü 109.130.00.1 ü 458.160.00.1 ü 110.170.00.1 ü 110.171.00.1 ü 110.150.00.1 ü Concealed cistern Duofix Kombifix ü Compatible Geberit actuator plate Delta1
1 for stop-and-go flush 246 Geberit actuator plate Delta15 for stop-and-go flush, screwable 25 3 246 164 164 Application purposes • For flush actuation with Geberit Delta concealed cisterns Application purposes • For flush actuation with Geberit Delta concealed cisterns Characteristics • Front actuation Characteristics • Front actuation Technical data Technical data Actuation force < 20 N Actuation force < 20 N Material Plastic Material Stainless steel Scope of delivery • Mounting frame • Actuator rod • Stop-and-go lever • Fastening material Scope of delivery • Mounting frame • Actuator rod • Stop-and-go lever • Set of bolts • Fastening material Art. no. Colour / Surface 115.120.11.1 white alpine Art. no. Colour / Surface 115.120.21.1 bright chrome-plated 115.101.00.1 stainless steel brushed 115.120.46.1 matt chrome-plated Accessories • Extension set for Geberit Delta and Geberit Twinline concealed cisterns → p. 88 86 A
ccessories • Extension set for Geberit Delta and Geberit Twinline concealed cisterns → p. 88 Geberit Actuator Plates and WC Flush Controls For Delta concealed cisterns Actuator plates Geberit actuator plate Delta21 for dual flush 246 Geberit cover plate Delta, screwable 26 246 164 18 164 Application purposes • For flush actuation with Geberit Delta concealed cisterns Characteristics • Front actuation Application purposes • For covering the service opening in Geberit Delta concealed cisterns Technical data Material Technical data Actuation force Scope of delivery • Mounting frame • Set of bolts • Fastening material < 20 N Material Stainless steel Plastic Scope of delivery • Mounting frame • 2 actuator rods • Fastening material Art. no. 115.103.00.1 Art. no. white alpine 115.125.21.1 bright chrome-plated 115.125.46.1 stainless steel brushed Accessories • Extension set for Geberit Delta and Geberit Twinline concealed cisterns → p. 88
Colour / Surface 115.125.11.1 Colour / Surface matt chrome-plated Accessories • Extension set for Geberit Delta and Geberit Twinline concealed cisterns → p. 88 Geberit actuator plate Delta50 for dual flush 246 25 164 Application purposes • For flush actuation with Geberit Delta concealed cisterns Characteristics • Front actuation Technical data Actuation force < 20 N Material Plastic Scope of delivery • Mounting frame • 2 actuator rods • Fastening material Art. no. Colour / Surface 115.135.11.1 white alpine 115.135.21.1 bright chrome-plated 115.135.46.1 matt chrome-plated Accessories • Extension set for Geberit Delta and Geberit Twinline concealed cisterns → p. 88 87 Geberit Actuator Plates and WC Flush Controls Actuator plates Accessories 5.1.4 Accessories Extension set for Geberit Sigma, Geberit Omega and Geberit Kappa concealed cisterns Extension set for Geberit Delta and Geberit Twinline concealed cisterns 145 4 115 Application purpose
s • For installation of Geberit actuator plates with oversize outer walls Application purposes • For installation of Geberit actuator plates with oversize outer walls Characteristics • Outer wall of 18 cm max. possible • Extension for actuator rods with fast adjustment • Extension for distance bolts with fast adjustment Characteristics • Outer wall of 18 cm max. possible • Extension for actuator rods with thread • Extension for distance bolts with fast adjustment Scope of delivery • 2 extensions for distance bolts • 2 extensions for actuator rods • Fastening material Scope of delivery • 2 extensions for distance bolts • 2 extensions for actuator rods • Fastening material Art. no. Art. no. 240.938.00.1 240.058.00.1 88 Accessories Geberit Actuator Plates and WC Flush Controls Actuator plates 89 Geberit Actuator Plates and WC Flush Controls WC flush controls with electronic flush actuation Accessories 5.2 WC flush controls with electronic flus
h actuation Assortment overview: Geberit WC flush controls with electronic flush actuation, touchless Sigma80 Art. no. 116.090.SG.1 116.090.SM.1 116.091.SG.1 116.091.SM.1 115.906.SN.1 115.907.xx.1 115.908.xx.1 → p. 95 Activation Detection / control Power supply Suitable for concealed cisterns → p. 98 → p. 93 → p. 94 → p. 100 Touchless Touchless Touchless Touchless Touchless Infrared-controlled Infrared-controlled Infrared-controlled Infrared-controlled Infrared-controlled Mains Mains Mains Mains Battery Sigma concealed cistern Sigma concealed cistern Sigma concealed cistern Sigma concealed cistern Sigma concealed cistern 12 cm 8 cm 12 cm 12 cm 12 cm Abstand max. 1,7 m Abstand max. 1,7 m Abstand max. 1,7 m Abstand max. 1,7 m Application range To order additionally 115.861.00.1 Installation set for Geberit WC flush controls with electronic flush actuation ü Compatible 90 ü ü ü ü Geberit Actuator Plates and WC Flush Controls
Accessories WC flush controls with electronic flush actuation Sigma10 Infrared button 115.909.SN.1 115.890.SN.5 115.855.SN.5 115.891.SN.5 115.857.00.1 115.858.00.1 115.857.21.1 115.858.21.1 → p. 99 → p. 93 → p. 98 → p. 99 → p. 97 Touchless Touchless / Manual Touchless / Manual Touchless / Manual Touchless / Manual Infrared-controlled Infrared-controlled Infrared-controlled Infrared-controlled Infrared-controlled Battery Mains Mains Battery Mains Sigma concealed cistern Sigma concealed cistern Sigma concealed cistern Sigma concealed cistern Sigma concealed cistern 12 cm 12 cm 8 cm 12 cm 12 cm Abstand max. 1,7 m Abstand max. 1,7 m ü ü 91 Geberit Actuator Plates and WC Flush Controls WC flush controls with electronic flush actuation Accessories Assortment overview: Geberit WC flush controls with electronic flush actuation, manual Sigma10 Art. no. Without actuator plate 115.863.SN.5 115.867.SN.5 115.869.SN.5 115.862.00.1 11
5.897.00.1 115.898.00.1 → p. 94 → p. 95 → p. 101 → p. 96 → p. 96 → p. 100 Manual Manual Manual Manual Manual Manual Manual (cable) Manual (radio) Manual (radio) Manual (cable) Manual (radio) Manual (radio) Activation Detection / control Power supply Suitable for concealed cisterns Mains Mains Battery Mains Mains Battery Sigma concealed Sigma concealed Sigma concealed Sigma concealed Sigma concealed Sigma concealed cistern 12 cm cistern 12 cm cistern 12 cm cistern 12 cm cistern 12 cm cistern 12 cm Abstand max. 1,7 m Abstand max. 1,7 m Abstand max. 1,7 m Abstand max. 1,7 m Abstand max. 1,7 m Abstand ca. 0,8 m Application range To order additionally 115.861.00.1 Installation set for Geberit WC flush controls with electronic ü ü ü ü flush actuation Accessories 241.155.00.1 Installation set for Geberit WC ü flush control with mechanical flush actuation, push-button 241.154.00.1 Installation set for Geberit WC flush contro
l with mechanical ü flush actuation, pull-down rail 241.568.00.1 RF-controlled button for electronic flush actuation ü Compatible 92 ü ü ü ü Geberit Actuator Plates and WC Flush Controls For mains operation, for Geberit Sigma concealed cisterns 12 cm WC flush controls with electronic flush actuation 5.2.1 For mains operation, for Geberit Sigma concealed cisterns 12 cm Geberit WC flush control with electronic flush actuation, mains operation, dual flush, actuator plate Sigma10, automatic/touchless/manual 246 Geberit WC flush control with electronic flush actuation, mains operation, dual flush, actuator plate Sigma10, automatic/touchless, screwable 15 246 14 164 164 Application purposes • For releasing a dual flush • For solid and drywall construction • For touchless flush actuation of Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block • Not suitable for barrier-free construction Application purposes
• For releasing a dual flush • For solid and drywall construction • For touchless flush actuation of Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block • Not suitable for barrier-free construction Characteristics • Touchless flush actuation for single or dual flush by moving hand toward sensor • Manual flush actuation via actuator plate • Actuator plate made of stainless steel, screwable • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset • Adjustable interval flush • Pre-flush can be set • Minimum detection time can be set • Compatible with Geberit Service Handy • Functions can be set and queried with the Geberit Service Handy • Vandal-resistant • Actuator plate made of stainless steel Characteristics • Touchless flush actuation for single or dual flush by moving hand toward sensor • Actuator
plate made of stainless steel, screwable • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset • Adjustable interval flush • Pre-flush can be set • Minimum detection time can be set • Compatible with Geberit Service Handy • Functions can be set and queried with the Geberit Service Handy • Vandal-resistant Technical data Protection degree Protection degree IP45 Nominal voltage 85-240 V AC Mains frequency 50-60 Hz Operating voltage 7s 85-240 V AC Mains frequency 50-60 Hz Operating voltage 4.1 V DC Detection time factory setting 7s 4.1 V DC Detection time factory setting IP45 Nominal voltage Technical data Scope of delivery • Actuator plate Sigma10 • Mounting frame with infrared control, pre-mounted • Protection plate • Support block with servomotor and lifting device, pre-mounted • Actuator rod • Fastening material Scope of delivery • Ac
tuator plate Sigma10 • Mounting frame with infrared control, pre-mounted • Protection plate • Support block with servomotor and lifting device, pre-mounted • Actuator rod • Fastening material stainless steel brushed/polished/brushed stainless steel brushed/polished/brushed Colour / Surface 115.890.SN.5 Colour / Surface 115.906.SN.1 Art. no. Art. no. To order additionally • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 To order additionally • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 93 Geberit Actuator Plates and WC Flush Controls WC flush controls with electronic flush actuation For mains operation, for Geberit Sigma concealed cisterns
12 cm Geberit WC flush control with electronic flush actuation, mains operation, dual flush, actuator plate Sigma10, automatic/touchless 14 246 Geberit WC flush control with electronic flush actuation, mains operation, single flush, actuator plate Sigma10, for pull-down rail, manual 164 Application purposes • For private and semi-public areas • For releasing a dual flush • For solid and drywall construction • For touchless flush actuation of Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block • Not suitable for barrier-free construction Characteristics • Touchless flush actuation for single or dual flush by moving hand toward sensor • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset • Adjustable interval flush • Pre-flush can be set • Minimum detection time can be set • Compatible with Geberit Service H
andy • Functions can be set and queried with the Geberit Service Handy • Actuator plate made of plastic Technical data Protection degree IP45 Nominal voltage 85-240 V AC Mains frequency 50-60 Hz Operating voltage 7s Characteristics • Flush actuation connected by wire • Flush actuation via pull-down rail, connected by wire • Push-buttons can be connected in parallel • Single flush can be triggered via actuator plate • Cover plates and stop-and-go flush actuators can be mounted • Can be combined with Geberit actuator plates for single flush and stop-and-go flush or Geberit cover plate • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset • Actuator plate made of stainless steel, screwable 4.1 V DC Detection time factory setting Application purposes • For manual remote flush actuation of Geberit Sigma concealed cisterns 12 cm using pull-down rails with po
tential-free pushbutton with closing function • For single flush • For solid and drywall construction • Suitable for barrier-free construction • For Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block Scope of delivery • Actuator plate Sigma10 • Mounting frame with infrared control, pre-mounted • Protection plate • Support block with servomotor and lifting device, pre-mounted • Actuator rod • Fastening material Technical data Protection degree IP45 Operating voltage 4.1 V DC Scope of delivery • Actuator plate Sigma10 • Mounting frame • Support block with servomotor and lifting device, pre-mounted • Electrical control • 2 cables, prefabricated, length 1.2 m • Actuator rod • Fastening material Art. no. Art. no. Colour / Surface 115.907.KH.1 bright chrome / matt chrome / bright chrome 115.907.KJ.1 white / bright chrome / white 115.907.KK.1 white / gold-plated / white 115.907.KL.1 white /
matt chrome / white 115.907.KM.1 black / bright chrome / black 115.907.KN.1 matt chrome / bright chrome / matt chrome 115.907.SN.1 stainless steel brushed/polished/brushed To order additionally • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 94 Colour / Surface 115.863.SN.5 stainless steel brushed/polished/brushed To order additionally • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 • Installation set for Geberit WC flush control with mechanical flush actuation, pull-down rail → p. 115 Geberit Actuator Plates and WC Flush Controls For mains operation, for Geberit Sigma concealed cisterns 12 cm Geberit WC flush control with electronic flush act
uation, mains operation, single flush, actuator plate Sigma10, for pull-down rail, radio WC flush controls with electronic flush actuation Geberit WC flush control with electronic flush actuation, mains operation, dual flush, actuator plate Sigma80, touchless 1 247 164 Application purposes • For manual remote flush actuation of Geberit Sigma concealed cisterns 12 cm using pull-down rails with RF-controlled button • For single flush • For solid and drywall construction • Suitable for barrier-free construction • For Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block Characteristics • Flush actuation using pull-down rail, wireless, radio • Single flush can be triggered via actuator plate • Cover plates and stop-and-go flush actuators can be mounted • Can be combined with Geberit actuator plates for single flush and stop-and-go flush or Geberit cover plate • Transformation of mains voltage to extra-low voltage,
4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset • Adjustable interval flush • Compatible with Geberit Service Handy • Functions can be set and queried with the Geberit Service Handy • Actuator plate made of stainless steel, screwable Technical data Nominal voltage 85-240 V AC Mains frequency 50-60 Hz Operating voltage 4.1 V DC Radio frequency 868.4 MHz Radio frequency distance 10 m Scope of delivery • Actuator plate Sigma10 • Mounting frame • Protection plate • Support block with servomotor and lifting device, pre-mounted • Control electronics with radio receiver • Actuator rod • Fastening material Art. no. stainless steel brushed/polished/brushed Application purposes • For private and semi-public areas • For releasing a dual flush • For solid and drywall construction • Suitable for barrier-free construction • For touchless flush actuation of Geberit Sigma concealed cisterns 12 cm • Not
suitable for use with Geberit insert for in-cistern block Characteristics • Flush actuation possible via external push-button • Actuator plate without mechanical buttons • Actuator buttons identifiable by light bars • Button illumination activated when approached • Button illumination can be set in five colours • Orientation light can be activated • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Flush actuation can be manually deactivated for cleaning • Adjustable interval flush • Pre-flush can be set • Minimum detection time can be set • Compatible with Geberit Service Handy • Functions can be set and queried with the Geberit Service Handy • Lockable Technical data Protection degree IP45 Nominal voltage 85-240 V AC Mains frequency 50-60 Hz Operating voltage 4.1 V DC Detection time factory setting 7s Scope of delivery • Actuator plate Sigma80 • Mounting frame â€
¢ Support block with servomotor and lifting device, pre-mounted • Fastening material Colour / Surface 115.867.SN.5 37 Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 Colour / Surface 116.090.SG.1 To order additionally • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Art. no. black glass 116.090.SM.1 glass, reflective To order additionally • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 95 Geberit Actuator Plates and WC Flush Controls WC flush controls with electronic flush actuation Geberit WC flush control with electronic flush actuation, mains operation, dual flush, for external push-button Application purposes • For manual remote flush actuation of Geberit Sigma concealed cisterns 12 cm u
sing standard, potential-free push-buttons with closing function • For releasing a dual flush • For solid and drywall construction • Suitable for barrier-free construction • For Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block Characteristics • Flush actuation connected by wire • Dual-flush remote control flush actuation via external pushbuttons • Push-buttons can be connected in parallel • Single flush can be triggered via actuator plate • Cover plates and stop-and-go flush actuators can be mounted • Can be combined with Geberit actuator plates for single flush and stop-and-go flush or Geberit cover plate • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset Technical data Nominal voltage 85-240 V AC Mains frequency 50-60 Hz Operating voltage 4.1 V DC Scope of delivery • Support block with servomoto
r and lifting device, pre-mounted • Actuator rod • Electrical control • Connection cable, length 2 m, prefabricated • Fastening material Art. no. 115.862.00.1 To order additionally • Actuator plate • Push-button • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation • Installation set Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 • Installation set for Geberit WC flush control with mechanical flush actuation, push-button → p. 115 • Geberit actuator plate Sigma10 for stop-and-go flush, screwable → p. 74 96 For mains operation, for Geberit Sigma concealed cisterns 12 cm Geberit WC flush control with electronic flush actuation, mains operation, dual flush, for RFcontrolled button Application purposes • For manual remote flush actuation of Geberit Sigma concealed cisterns 12 cm using Geberit RF-controlled button • For releasing a dual flush • For
solid and drywall construction • Suitable for barrier-free construction • For Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block Characteristics • Flush actuation via Geberit RF-controlled button, wireless • Dual flush can be triggered via RF-controlled button • Single flush can be triggered via actuator plate • Cover plates and stop-and-go flush actuators can be mounted • Can be combined with Geberit actuator plates for single flush and stop-and-go flush or Geberit cover plate • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset • Adjustable interval flush • Compatible with Geberit Service Handy • Functions can be set and queried with the Geberit Service Handy Technical data Nominal voltage 85-240 V AC Mains frequency 50-60 Hz Operating voltage 4.1 V DC Radio frequency 868.4 MHz Radio frequency dista
nce 10 m Scope of delivery • Mounting frame • Protection plate • Support block with servomotor and lifting device, pre-mounted • Electrical control • Fastening material Art. no. 115.897.00.1 To order additionally • Actuator plate • RF-controlled button • Installation set with power supply unit, for Geberit WC flush controls with electronic flush actuation Accessories • Installation set for Geberit WC flush control with electronic flush actuation → p. 115 • Geberit RF-controlled button for electronic flush actuation → p. 115 • Geberit actuator plate Sigma10 for stop-and-go flush, screwable → p. 74 Geberit Actuator Plates and WC Flush Controls For mains operation, for Geberit Sigma concealed cisterns 12 cm N ew Geberit WC flush control with electronic flush actuation, mains operation, dual flush, IR button 63 WC flush controls with electronic flush actuation N ew Geberit WC flush control with electronic flush actuation, mains operation, single flush,
IR button 63 33 33 43 25–52 Application purposes • For releasing a dual flush • For drywall construction • For Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block Characteristics • Single flush can be triggered via actuator plate • Cover plates and stop-and-go flush actuators can be mounted • Can be combined with Geberit actuator plates for single flush and stop-and-go flush or Geberit cover plate • Transformation of mains voltage to extra-low voltage, 4.1 V DC • Operation with extra-low voltage, no mains voltage in cistern • Interval flush preset Technical data 25–52 Application purposes • For single flush • For drywall construction • For Geberit Sigma concealed cisterns 12 cm • Not suitable for use with Geberit insert for in-cistern block Characteristics • Single flush can be triggered via actuator plate • Cover plates and stop-and-go flush actuators can be mounted • Can be combined with Geb
erit actuator plates for single
