Geberit Piping Systems Catalogue 2015/2016 Valid from 1 April 2015 Geberit HDPE Geberit Conventional Roof Drainage Systems Geberit Pluvia Roof Drainage Systems Geberit Silent-db 20 Geberit Fire Protection, Sound Insulation and Moisture Protection Geberit Floor Drainage Systems Geberit Mepla Geberit Mapress Stainless Steel Geberit Mapress Carbon Steel Geberit Mapress Copper Geberit Mapress CuNiFe Geberit Pipe Valve Fitting Geberit Radiant Heating and Cooling Tools and Software Appendix Geberit HDPE 1. Geberit HDPE 1.1 Pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1.2 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5 1.2.6 Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 6 Branch fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reducers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Access pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Special fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 1.3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 1.3.1 1.3.2 1.3.3 1.3.4 1.3.5 1.3.6 Welding joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Push-in connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Adapters on other product materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Screwing joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Flange connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Flange bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 1.4 Waste fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 1.4.1 1.4.2 1.4.3 1.4.4 1.4.5 Connection bends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .34 Coupling sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Straight connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 P-traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Suction traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 1.5 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 1.5.1 1.5.2 1.5.3 1.5.4 1.5.5 1.5.6 1.5.7 1.5.8 Air admittance valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Pipe brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Fastenings for pipe brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Support shells. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Sealings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Protection covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 5 Geberit HDPE Pipes Bends 1.1 Pipes 1.2 Fittings Geberit HDPE pipe 1.2.1 Bends L s Gebe
rit HDPE bend 30° d d di K X d A X Application purposes • For building drainage r K d Characteristics • UV-resistant Application purposes • For building drainage Technical data Material PE-HD Art. no. DN d, ø [mm] di, ø [mm] s [mm] L [m] Acm² [cm²] PN [bar] S 379.000.16.0 30 32 26 3 5 5.3 10.3 5 360.000.16.0 40 40 34 3 5 9 8.1 6.3 361.000.16.0 50 50 44 3 5 15.2 6.4 8 363.000.16.0 56 56 50 3 5 19.6 5.7 8.8 364.000.16.0 60 63 57 3 5 25.4 5 10 365.000.16.0 70 75 69 3 5 37.3 4.1 Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant 12.5 Technical data 366.000.16.0 90 90 83 3.5 5 54.1 4 100 110 101.4 4.3 5 80.7 4 12.5 368.000.16.0 125 125 115.2 4.9 5 104.5 4 Art. no. 370.030.16.1 PE-HD DN d, ø [mm] X [cm] K [cm] r [cm] 200 200 15 2 20 12.5 367.000.16.0 Material 12.5 369.000.16.0 150 160 147.6 6.2 5 171.1 4
12.5 370.000.16.0 200 200 187.6 6.2 5 276.4 3.2 16 371.000.16.0 250 250 234.4 7.8 5 431.5 3.2 16 372.000.16.0 300 315 295.4 9.8 5 685.3 3.2 Geberit HDPE segment bend 30° 16 X d K X K r d Geberit HDPE pipe PN4 L Application purposes • For building drainage s d d Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant di A Technical data Application purposes • For discharge pipes with increased negative pressure • For building drainage Material Art. no. Material PE-HD DN d, ø [mm] di, ø [mm] s [mm] L [m] Acm² [cm²] PN [bar] S 370.050.16.0 200 200 184.6 7.7 5 268.4 4 12.5 371.050.16.0 250 250 230.6 9.7 5 418.2 4 12.5 372.050.16.0 300 315 290.6 12.2 5 663.8 4 12.5 6 d, ø [mm] X [cm] K [cm] 250 250 16 3 42 372.030.16.1 Technical data DN 371.030.16.1 Characteristics • UV-resistant Art. no. PE-HD r [cm] 300 315 17 3 47.3 Geberit
HDPE Bends Fittings Geberit HDPE bend 45° Geberit HDPE bend 45° with large leg K X X X1 K1 d K K2 X2 d Application purposes • For building drainage Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant Technical data Material Art. no. PE-HD DN d, ø [mm] X [cm] 40 40 4 50 50 4.5 2 363.045.16.1 56 56 4.5 2 364.045.16.1 60 63 5 Material 2 2 PE-HD 2 361.045.16.1 Characteristics • Can be welded on both sides with electrofusion coupling • Wide radius • UV-resistant Technical data K [cm] 360.045.16.1 Application purposes • For building drainage 365.045.16.1 70 75 5 366.045.16.1 90 90 5.5 100 110 6 125 125 6.5 150 160 6.9 X1 [cm] X2 [cm] K1 [cm] K2 [cm] 365.046.16.1 2.5 369.045.16.1 d, ø [mm] 70 75 9.1 5 6 2 367.046.16.1 2.5 368.045.16.1 DN 100 110 14.7 6 11 2.5 2 367.045.16.1 Art. no. 2 Geberit HDPE segment bend 45° K X d Geberit HDPE ben
d 45° X X K K r d d X Application purposes • For building drainage r K Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant d Application purposes • For building drainage Technical data Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant Art. no. 370.045.16.1 DN d, ø [mm] X [cm] K [cm] 200 18 2.5 d, ø [mm] X [cm] K [cm] r [cm] 250 250 16.5 3 29 300 315 18 3 32.5 r [cm] 200 DN 371.045.16.1 PE-HD Art. no. PE-HD 372.045.16.1 Technical data Material Material 20 7 Geberit HDPE Fittings Bends Geberit HDPE bend 88.5° Geberit HDPE bend 90° X X K K d X X d K r K d Application purposes • For building drainage Application purposes • For building drainage Characteristics • UV-resistant Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant Technical data Material PE-HD Technical dat
a Art. no. DN d, ø [mm] X [cm] Material K [cm] 361.088.16.1 50 50 6 2 363.088.16.1 56 56 6.5 2 364.088.16.1 60 63 7 2 PE-HD 2 365.088.16.1 70 75 7.5 366.088.16.1 90 90 8 100 110 9.5 370.055.16.1 2.5 DN d, ø [mm] X [cm] K [cm] r [cm] 200 200 30 2.5 20 2 367.088.16.1 Art. no. 368.088.16.1 125 125 10 2.5 369.088.16.1 150 160 12 Geberit HDPE bend 90° with large leg 2.5 X2 Geberit HDPE segment bend 90° r X1 K1 X d K d X K r d Application purposes • For building drainage Characteristics • Wide radius • UV-resistant Technical data Material Application purposes • For building drainage Characteristics • Can be welded on both sides with electrofusion coupling • UV-resistant Art. no. PE-HD DN d, ø [mm] X1 [cm] X2 [cm] K1 [cm] r [cm] 379.055.16.1 30 32 10 3 7 3 360.055.16.1 40 40 15 3 12 3 361.055.16.1 PE-HD 50 18 4 14 4 56 56 21 4 17 4 364.055.16.1 Material 50 363.
055.16.1 Technical data 60 63 21 5 16 5 70 75 21 7 14 7 DN d, ø [mm] X [cm] K [cm] r [cm] 365.055.16.1 366.055.16.1 90 90 24 9 15 9 371.055.16.1 250 250 33.5 3 29 367.055.16.1 100 110 27 10 17 10 372.055.16.1 300 315 37 3 32.5 Art. no. 8 368.055.16.1 125 125 20 11 9 11 369.055.16.1 150 160 20 14.5 6 14 Geberit HDPE Bends Fittings Geberit HDPE bend 90°, reduced, without leg X d1 X r d Application purposes • For building drainage Characteristics • Wide radius • UV-resistant Technical data Material Art. no. PE-HD d, ø [mm] d1, ø [mm] X [cm] r [cm] 361.872.16.1 50 40 4 4 363.873.16.1 56 50 4 4 364.873.16.1 63 50 5 5 364.874.16.1 63 56 5 5 9 Geberit HDPE Fittings Branch fittings 1.2.2 Branch fittings Geberit HDPE branch fitting 45° d1 H X3 K3 X1 K1 K2 d X2 Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no.
PE-HD DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 379.108.16.1 30 / 30 32 32 10.5 3.5 7 7 2 2 2 360.108.16.1 40 / 30 40 32 13.5 4.5 9 9 3 3.5 3.5 360.109.16.1 40 / 40 40 40 13.5 4.5 9 9 2.5 3 3 361.109.16.1 50 / 40 50 40 16.5 5.5 11 11 4 4.5 4.5 2 361.112.16.1 50 / 50 50 50 16.5 5.5 11 11 3.5 2 363.112.16.1 56 / 50 56 50 18 6 12 12 4 3 3 363.115.16.1 56 / 56 56 56 18 6 12 12 4 2.5 2.5 364.109.16.1 60 / 40 63 40 19.5 6.5 13 13 4.5 4.5 4 364.112.16.1 60 / 50 63 50 19.5 6.5 13 13 5 3 3 364.115.16.1 60 / 56 63 56 19.5 6.5 13 13 4.5 2.5 2.5 364.120.16.1 60 / 60 63 63 19.5 6.5 13 13 4 2 2 365.109.16.1 70 / 40 75 40 21 7 14 14 6.5 5 6 365.112.16.1 70 / 50 75 50 21 7 14 14 6 3 4 365.115.16.1 70 / 56 75 56 21 7 14 14 5.5 2.5 3.5 365.120.16.1 70 / 60 75 63 21 7 14 14 4.5 2.5 3.5 365.12
5.16.1 70 / 70 75 75 21 7 14 14 4 2.5 2.5 366.109.16.1 90 / 40 90 40 24 8 16 16 7.5 5.5 6.5 366.112.16.1 90 / 50 90 50 24 8 16 16 8 4 5 366.115.16.1 90 / 56 90 56 24 8 16 16 7.5 3.5 4.5 366.120.16.1 90 / 60 90 63 24 8 16 16 7 3 4 3.5 366.125.16.1 90 / 70 90 75 24 8 16 16 6.5 3 366.130.16.1 90 / 90 90 90 24 8 16 16 5 2 2 367.109.16.1 100 / 40 110 40 27 9 18 18 9.5 6 7.5 367.112.16.1 100 / 50 110 50 27 9 18 18 9.5 5 5.5 4.5 367.115.16.1 100 / 56 110 56 27 9 18 18 9 4 367.120.16.1 100 / 60 110 63 27 9 18 18 8.5 3.5 4 367.125.16.1 100 / 70 110 75 27 9 18 18 7.5 3 3.5 367.130.16.1 100 / 90 110 90 27 9 18 18 6.5 2.5 3 367.135.16.1 100 / 100 110 110 27 9 18 18 5.5 2 2 368.120.16.1 125 / 60 125 63 30 10 20 20 10.5 4.5 6 368.125.16.1 125 / 70 125 75 30 10 20 20 9.5 4 5 368.130.16.1 125 / 90 125 90 30 10 20 20 8.5 3
3.5 368.135.16.1 125 / 100 125 110 30 10 20 20 7 2.5 2.5 368.139.16.1 125 / 125 125 125 30 10 20 20 6 2 2 369.125.16.1 150 / 70 160 75 37.5 12.5 25 25 13.5 6.5 7.5 369.130.16.1 150 / 90 160 90 37.5 12.5 25 25 12.5 5.5 6.5 369.135.16.1 150 / 100 160 110 37.5 12.5 25 25 11 4.5 5.5 369.139.16.1 150 / 125 160 125 37.5 12.5 25 25 10 4 5 10 Geberit HDPE Branch fittings Fittings Art. no. DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 2.5 369.145.16.1 150 / 150 160 160 37.5 12.5 25 25 7.5 2.5 370.125.16.1 200 / 70 200 75 54 18 36 36 18 14 12 370.135.16.1 200 / 100 200 110 54 18 36 36 15 14 6.5 370.139.16.1 200 / 125 200 125 54 18 36 36 14 13 5.5 3.5 370.145.16.1 200 / 150 200 160 54 18 36 36 11.5 8.5 370.146.16.1 200 / 200 200 200 54 18 36 36 8.5 1 1 371.135.16.1 250 / 100 250 110 66 22 44 44 21.5 13.5 1
5 371.139.16.1 250 / 125 250 125 66 22 44 44 20.5 17.5 14 371.145.16.1 250 / 150 250 160 66 22 44 44 18 13 5 371.146.16.1 250 / 200 250 200 66 22 44 44 15 5 9 371.147.16.1 250 / 250 250 250 66 22 44 44 11.5 5.5 5.5 372.135.16.1 300 / 100 315 110 84 28 56 56 30.5 26 23.5 372.139.16.1 300 / 125 315 125 84 28 56 56 29 25 22 372.145.16.1 300 / 150 315 160 84 28 56 56 27 20.5 20 372.146.16.1 300 / 200 315 200 84 28 56 56 24 12.5 17.5 372.147.16.1 300 / 250 315 250 84 28 56 56 20.5 13 14 372.148.16.1 300 / 300 315 315 84 28 56 56 16 9.5 9.5 Geberit HDPE branch fitting 88.5° X2 K3 X3 H X1 d1 K1 h d Application purposes • For building drainage Characteristics • Swept entry • UV-resistant Technical data Material Art. no. 367.163.16.1 PE-HD DN d, ø [mm] d1, ø [mm] H [cm] h [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K3 [cm] 100 / 100 110 110 22.5 13.8 13.5
11.5 9 3.5 3.5 11 Geberit HDPE Fittings Branch fittings Geberit HDPE branch fitting 88.5° X2 K2 K3 X3 H d1 X1 K1 d Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no. PE-HD DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 1 379.158.16.1 30 / 30 32 32 8.5 5 3.5 3.5 2.5 1 360.158.16.1 40 / 30 40 32 13 7.5 5.5 5.5 5 2.5 2 360.159.16.1 40 / 40 40 40 13 7.5 5.5 5.5 4.5 2.5 2.5 361.159.16.1 50 / 40 50 40 15 9 6 6 6 2.5 3 361.162.16.1 50 / 50 50 50 15 9 6 6 5.5 2.5 2.5 363.162.16.1 56 / 50 56 50 17.5 10.5 7 7 7 3 3.5 363.165.16.1 56 / 56 56 56 17.5 10.5 7 7 6.5 3 3 364.159.16.1 60 / 40 63 40 17.5 10.5 7 7 7 3 3 364.162.16.1 60 / 50 63 50 17.5 10.5 7 7 7 3 3.5 364.165.16.1 60 / 56 63 56 17.5 10.5 7 7 6.5 3 3 364.170.16.1 60 / 60 63 63 17.5 10.5 7 7 6 3 3
365.159.16.1 70 / 40 75 40 17.5 10.5 7 7 7.5 2.5 4 365.162.16.1 70 / 50 75 50 17.5 10.5 7 7 7 2.5 3.5 365.165.16.1 70 / 56 75 56 17.5 10.5 7 7 6.5 2.5 3 365.170.16.1 70 / 60 75 63 17.5 10.5 7 7 6 2.5 2.5 365.175.16.1 70 / 70 75 75 17.5 10.5 7 7 5.5 2.5 2.5 366.159.16.1 90 / 40 90 40 20 12 8 8 8.5 2.5 4.5 366.162.16.1 90 / 50 90 50 20 12 8 8 8.5 2.5 4.5 366.165.16.1 90 / 56 90 56 20 12 8 8 8 2.5 4 366.170.16.1 90 / 60 90 63 20 12 8 8 7.5 2.5 3.5 366.175.16.1 90 / 70 90 75 20 12 8 8 7 2.5 3 366.180.16.1 90 / 90 90 90 20 12 8 8 6.5 2.5 2.5 367.159.16.1 100 / 40 110 40 22.5 13.5 9 9 10 2.5 6 367.162.16.1 100 / 50 110 50 22.5 13.5 9 9 9.5 2.5 5 4.5 367.165.16.1 100 / 56 110 56 22.5 13.5 9 9 9 2.5 367.170.16.1 100 / 60 110 63 22.5 13.5 9 9 9 2.5 4 367.175.16.1 100 / 70 110 75 22.5 13.5 9 9 8.5 2.5 3.5 367.180.16.1 10
0 / 90 110 90 22.5 13.5 9 9 7.5 2.5 3 367.185.16.1 100 / 100 110 110 22.5 13.5 9 9 6.5 2 2 368.162.16.1 125 / 50 125 50 25 15 10 10 11 2.5 6 368.165.16.1 125 / 56 125 56 25 15 10 10 10.5 2.5 5.5 368.170.16.1 125 / 60 125 63 25 15 10 10 10.5 2.5 5 368.175.16.1 125 / 70 125 75 25 15 10 10 10 2.5 4.5 368.180.16.1 125 / 90 125 90 25 15 10 10 9 2.5 4 368.185.16.1 125 / 100 125 110 25 15 10 10 8 2 3 368.189.16.1 125 / 125 125 125 25 15 10 10 7 2 2 369.175.16.1 150 / 70 160 75 35 21 14 14 15 4.5 8 369.185.16.1 150 / 100 160 110 35 21 14 14 13.5 4.5 6 369.195.16.1 150 / 150 160 160 35 21 14 14 10.5 3.5 3 12 Geberit HDPE Branch fittings Fittings Art. no. DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 370.180.16.1 200 / 90 200 90 36 18 18 18 7 6 7 370.185.16.1 200 / 100 200 110 36 18 18 18 7 6 7
370.195.16.1 200 / 150 200 160 36 18 18 18 4.5 5 4.5 370.196.16.1 200 / 200 200 200 40 20 20 20 2.5 3 2.5 371.185.16.1 250 / 100 250 110 44 22 22 22 11 7.5 11 371.189.16.1 250 / 125 250 125 44 22 22 22 10.5 7.5 10.5 371.195.16.1 250 / 150 250 160 44 22 22 22 8.5 6.5 8.5 371.196.16.1 250 / 200 250 200 48 24 24 24 6.5 4 6.5 371.197.16.1 250 / 250 250 250 48 24 24 24 4 4 4 372.185.16.1 300 / 100 315 110 56 28 28 28 17 10 17 372.189.16.1 300 / 125 315 125 56 28 28 28 16.5 10 16.5 372.195.16.1 300 / 150 315 160 56 28 28 28 14.5 9 14.5 372.196.16.1 300 / 200 315 200 56 28 28 28 12 6.5 12 372.197.16.1 300 / 250 315 250 56 28 28 28 9.5 6.5 9.5 372.198.16.1 300 / 300 315 315 56 28 28 28 7 6.5 7 Geberit HDPE double branch fitting 45° K3 d1 d1 H X3 K2 X1 K1 d X2 Application purposes • For building drainage • For vertical installation Character
istics • UV-resistant Technical data Material Art. no. PE-HD d, ø [mm] d1, ø [mm] H [cm] 367.209.16.1 110 40 27 9 18 18 9.5 6 7.5 367.212.16.1 110 50 27 9 18 18 9.5 6 7.5 110 110 27 9 18 18 5 1.5 1.5 367.235.16.1 DN 100 / 100 X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 13 Geberit HDPE Fittings Branch fittings Geberit HDPE double branchball 88.5°, connections 90° offset D 90 K3 885 d1 X3 H d1 K1 X1 d1 d K2 X2 Application purposes • For building drainage Technical data Material PE-HD Characteristics • UV-resistant Art. no. DN d, ø [mm] d1, ø [mm] D [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] 364.320.16.1 60 / 60 63 63 10 16 8 10 8 1.5 4.5 1.5 365.325.16.1 70 / 70 75 75 12 16 8 10 8 1.5 3.5 1.5 366.330.16.1 90 / 90 90 90 14 18 9 11 9 2 4 2 367.315.16.1 100 / 56 110 56 17 20 10 12 10 1.5 1.5 1.5 110 63 17 20 10 12 10 1.5 1.5 1.5 367.320.16.1
K2 [cm] K3 [cm] 367.325.16.1 100 / 70 110 75 17 20 10 12 10 1.5 1.5 1.5 367.330.16.1 100 / 90 110 90 17 20 10 12 10 1.5 1.5 1.5 367.335.16.1 100 / 100 110 110 17 20 10 12 10 1.5 4 1.5 368.335.16.1 125 / 100 125 110 18 20 10 12.5 10 1.5 4 1.5 369.335.16.1 150 / 100 160 110 23 25 12.5 16 12.5 2 1.5 2 Geberit HDPE double branchball 88.5°, connections 135° offset D K3 d1 885 X3 H d1 d1 135 X1 d K1 K2 X2 Application purposes • For building drainage Technical data Material PE-HD Characteristics • UV-resistant Art. no. DN 365.375.16.1 70 / 70 d1, ø [mm] D [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] 63 364.370.16.1 d, ø [mm] K2 [cm] K3 [cm] 63 10 16 8 10 8 1.5 4.5 1.5 75 75 12 16 8 10 8 1.5 3.5 1.5 366.380.16.1 90 / 90 90 90 14 18 9 11 9 2 4 2 367.362.16.1 100 / 40 110 50 17 20 10 12 10 1.5 1.5 1.5 367.365.16.1 100 / 56 110 56 17 20 10 12 10
1.5 1.5 1.5 367.370.16.1 100 / 60 110 63 17 20 10 12 10 1.5 1.5 1.5 367.375.16.1 100 / 70 110 75 17 20 10 12 10 1.5 1.5 1.5 367.380.16.1 100 / 90 110 90 17 20 10 12 10 1.5 1.5 1.5 367.385.16.1 100 / 100 110 110 17 20 10 12 10 1.5 4 1.5 368.385.16.1 125 / 100 125 110 18 20 10 12.5 10 1.5 4 1.5 369.385.16.1 150 / 100 160 110 23 25 12.5 16 12.5 2 1.5 2 14 Geberit HDPE Branch fittings Fittings Geberit HDPE double branchball 88.5°, connections 180° offset 180 D K3 885 X3 H d1 K1 d1 d1 d1 X1 d K2 X2 Application purposes • For building drainage Characteristics • UV-resistant Technical data Material PE-HD Art. no. DN d, ø [mm] d1, ø [mm] D [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] 364.270.16.1 60 / 60 63 63 10 365.275.16.1 70 / 70 75 75 12 366.280.16.1 90 / 90 90 90 K2 [cm] K3 [cm] 16 8 10 8 1.5 4.5 1.5 16 8 10 8 1.5 3.5 1.5 14 18 9 11 9 2 4
2 1.5 367.262.16.1 100 / 40 110 50 17 20 10 12 10 1.5 1.5 367.265.16.1 100 / 56 110 56 17 20 10 12 10 1.5 1.5 1.5 367.270.16.1 100 / 60 110 63 17 20 10 12 10 1.5 1.5 1.5 367.275.16.1 100 / 70 110 75 17 20 10 12 10 1.5 1.5 1.5 367.280.16.1 100 / 90 110 90 17 20 10 12 10 1.5 1.5 1.5 367.285.16.1 100 / 100 110 110 17 20 10 12 10 1.5 4 1.5 368.285.16.1 125 / 100 125 110 18 20 10 12.5 10 1.5 4 1.5 369.285.16.1 150 / 100 160 110 23 25 12.5 16 12.5 2 1.5 2 Geberit HDPE triple branchball 88.5°, connections 90° offset D K3 H 90 885 d1 X3 d1 X1 d1 d1 d1 d K1 K2 X2 Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no. 364.605.16.1 PE-HD DN d, ø [mm] d1, ø [mm] D [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 60 / 60 63 63 10 16 8 10 8 1.5 4.5 1.5 1.5 365.605.16.1 70 / 70 75 75 12 1
6 8 10 8 1.5 3.5 366.605.16.1 80 / 80 90 90 14 18 9 11 9 2 4 2 367.605.16.1 100 / 100 110 110 17 20 10 12 10 1.5 4 1.5 368.605.16.1 125 / 100 125 110 18 20 10 12 10 1.5 4 1.5 369.605.16.1 150 / 100 160 110 23 25 12.5 16 12.5 2 1.5 2 15 Geberit HDPE Fittings Branch fittings Geberit HDPE triple branchball 88.5°, connections 135° offset d1 D K3 885 d1 90 X3 H d1 d1 135 X1 d K1 K2 X2 Application purposes • For building drainage Characteristics • UV-resistant Technical data Material PE-HD Art. no. DN d, ø [mm] d1, ø [mm] D [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] 364.600.16.1 K2 [cm] K3 [cm] 1.5 63 63 10 16 8 10 8 1.5 4.5 365.600.16.1 70 / 70 75 75 12 16 8 10 8 1.5 3.5 1.5 367.600.16.1 100 / 100 110 110 17 20 10 12 10 1.5 4 1.5 368.600.16.1 125 / 100 125 110 18 20 10 12 10 1.5 4 1.5 Geberit HDPE quadruple branchball 88.5°, connections 90° offset
D K3 H d1 90 90 885 d1 X3 d1 X1 d1 d1 90 K1 90 d1 d K2 X2 Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no. PE-HD DN d, ø [mm] d1, ø [mm] D [cm] 364.610.16.1 60 / 60 63 63 10 365.610.16.1 70 / 70 75 75 12 367.610.16.1 100 / 100 110 110 17 20 368.610.16.1 125 / 100 125 110 18 20 16 H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K2 [cm] K3 [cm] 16 8 10 8 1.5 4.5 1.5 16 8 10 8 1.5 3.5 1.5 10 12 10 1.5 4 1.5 10 12.5 10 1.5 4 1.5 Geberit HDPE Branch fittings Fittings Geberit HDPE quadruple branch fitting 88.5° X2 K3 88.5 X3 H X1 X2 X2 d1 d1 d1 d1 90 K1 d1 90 d Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no. PE-HD d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] K3 [cm] 110 56 22.5 13.5 9 9 7.5 3 367.445.16.1 Geberit HDPE breeches branch
fitting 2 x 30° 30 30 d1 d1 K2 X1 X2 K1 d Application purposes • For building drainage • For vertical installation Characteristics • UV-resistant Technical data Material Art. no. PE-HD DN d, ø [mm] d1, ø [mm] X1 [cm] X2 [cm] K1 [cm] K2 [cm] 361.459.16.1 50 / 40 50 40 5.5 11 4 5 361.462.16.1 50 / 50 50 50 5.5 11 3 4 363.462.16.1 56 / 50 56 50 6 12 4 5 363.465.16.1 56 / 56 56 56 1.8 5.3 0 0 364.462.16.1 60 / 50 63 50 6.5 13 5 6 364.465.16.1 60 / 56 63 56 6.5 13 4 6 365.465.16.1 70 / 56 75 56 7 14 6 7 365.470.16.1 70 / 60 75 63 7 14 5 6 367.480.16.1 100 / 90 110 90 9 18 7 7 367.481.16.1 100 / 100 110 110 9 10.2 5 17 Geberit HDPE Fittings Branch fittings Geberit breeches branch fitting 2 x 90° A a a d1 d1 H K d Application purposes • For building drainage • For buildings with increased sound insulation requirements • For vertical installation Characteristics •
Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. 308.480.14.1 18 DN d, ø [mm] d1, ø [mm] A [cm] a [cm] H [cm] K [cm] 90 / 90 90 90 30 15 17.5 3 Geberit HDPE Reducers Fittings 1.2.3 Reducers Geberit HDPE reducer, eccentric, short d1 H K h1 h A K d Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no. PE-HD DN d, ø [mm] d1, ø [mm] A [cm] H [cm] h [cm] h1 [cm] K [cm] 361.558.16.1 50 / 40 50 40 0.5 8 3.7 3.5 2 363.558.16.1 56 / 40 56 40 0.8 8 3.7 3.5 2 363.561.16.1 56 / 50 56 50 0.3 8 3.7 3.5 2 364.558.16.1 60 / 40 63 40 1.15 8 3.7 3.5 2 364.561.16.1 60 / 50 63 50 0.65 8 3.7 3.5 2 364.566.16.1 60 / 56 63 56 0.35 8 3.7 3.5 2 365.558.16.1 70 / 40 75 40 1.75 8 3.7 3.5 2 365.561.16.1
70 / 50 75 50 1.25 8 3.7 3.5 2 365.566.16.1 70 / 56 75 56 0.95 8 3.7 3.5 2 365.571.16.1 70 / 60 75 63 0.6 8 3.7 3.5 2 366.561.16.1 90 / 50 90 50 2 8 3.7 3.5 2 366.566.16.1 90 / 56 90 56 1.7 8 3.7 3.5 2 366.571.16.1 90 / 60 90 63 1.3 8 3.7 3.5 2 366.576.16.1 90 / 70 90 75 0.75 8 3.7 3.5 2 367.558.16.1 100 / 40 110 40 3.4 8 3.7 3.5 2 367.561.16.1 100 / 50 110 50 2.9 8 3.7 3.5 2 367.566.16.1 100 / 56 110 56 2.6 8 3.7 3.5 2 367.571.16.1 100 / 60 110 63 2.2 8 3.7 3.5 2 367.576.16.1 100 / 70 110 75 1.6 8 3.7 3.5 2 367.581.16.1 100 / 90 110 90 0.9 8 3.7 3.5 2 368.561.16.1 125 / 50 125 50 3.6 8 3.7 3.5 2 368.566.16.1 125 / 56 125 56 3.3 8 3.7 3.5 2 368.571.16.1 125 / 60 125 63 2.9 8 3.7 3.5 2 368.576.16.1 125 / 70 125 75 2.3 8 3.7 3.5 2 368.581.16.1 125 / 90 125 90 1.6 8 3.7 3.5 2 368.586.16.1 125 / 100 125 110 0.7 8 3.7 3.5 2
369.586.16.1 150 / 100 160 110 2.3 8 3.5 3.7 2 369.588.16.1 150 / 125 160 125 1.6 8 3.5 3.7 2 369.591.16.1 150 / 140 160 140 1 8 3.5 3.7 2 19 Geberit HDPE Fittings Reducers Geberit HDPE reducer, eccentric, long d1 K2 l2 L l1 K1 d A Application purposes • For building drainage Characteristics • UV-resistant Technical data Material PE-HD Art. no. DN d, ø [mm] d1, ø [mm] A [cm] L [cm] l1 [cm] l2 [cm] K1 [cm] K2 [cm] 368.584.16.1 125 / 100 125 110 0.7 16 7 6.4 4 3 369.584.16.1 150 / 100 160 110 2.5 28 9.4 6.4 6 3 5 369.587.16.1 150 / 125 160 125 1.7 24 9.4 8 6 370.584.16.5 200 / 100 200 110 4.3 28 11.5 3.7 4 0 370.587.16.5 200 / 125 200 125 3.6 28 11.5 3.7 4 0 370.594.16.5 200 / 150 200 160 2 28 11.9 9.1 4 6 371.596.16.1 250 / 200 250 200 2.5 40.5 15.8 15.7 8 8 372.596.16.1 300 / 200 315 200 5.7 58 16.1 15.7 8 8 372.598.16.1 300 / 250 315 250 3.2 43
.5 16.1 15.7 8 8 Geberit HDPE reducer, concentric, short d1 h H K h d K Application purposes • For building drainage Characteristics • UV-resistant Technical data Material Art. no. PE-HD DN d, ø [mm] d1, ø [mm] H [cm] h [cm] K [cm] 360.557.16.1 40 / 30 40 32 8 3 1.5 361.557.16.1 50 / 30 50 32 8 3 1.5 361.559.16.1 50 40 8 3 1.5 363.510.16.1 56 48 4 363.559.16.1 56 40 8 3 1.5 363.560.16.1 56 50 8 3 1.5 364.559.16.1 63 40 8 3 1.5 364.560.16.1 63 50 8 3 1.5 364.565.16.1 63 56 8 3 1.5 365.559.16.1 75 40 8 3 1.5 365.560.16.1 75 50 8 3 1.5 365.565.16.1 75 56 8 3 1.5 365.570.16.1 75 63 8 3 1.5 20 70 / 40 Geberit HDPE Access pipes Fittings Art. no. DN d, ø [mm] d1, ø [mm] H [cm] h [cm] K [cm] 366.559.16.1 90 40 8 3 1.5 366.560.16.1 90 50 8 3 1.5 366.565.16.1 90 56 8 3 1.5 366.570.16.1 90 63 8 3 1.5 1.5 366.575.16.1 90 75 8 3 367.559.16.1 110 40
8 3 1.5 367.560.16.1 110 50 8 3 1.5 367.565.16.1 110 56 8 3 1.5 367.570.16.1 110 63 8 3 1.5 367.575.16.1 110 75 8 3 1.5 110 90 8 3 1.5 368.570.16.1 125 63 8 3 1.5 368.575.16.1 125 75 8 3 1.5 368.580.16.1 125 90 8 3 1.5 368.585.16.1 125 110 8 3 1.5 369.535.16.1 160 110 4 0.6 367.580.16.1 100 / 90 1.2.4 Access pipes Geberit HDPE access pipe 45° with round service opening A a d1 H X3 X1 K1 d Application purposes • For building drainage Characteristics • UV-resistant Technical data Material PE-HD Scope of delivery • Seal made of EPDM • Cap made of PP Art. no. d, ø [mm] d1, ø [mm] A [cm] a [cm] H [cm] X1 [cm] X3 [cm] K1 [cm] 5.5 367.453.16.1 110 110 19.5 6.5 27 9 18 368.453.16.1 125 110 20 7 30 10 20 7 369.453.16.1 160 110 22 9 37.5 12.5 25 11 21 Geberit HDPE Fittings Access pipes Geberit HDPE access pipe 90° with round service opening K3 90 X3 d1 H X1 K1 d A
Application purposes • For building drainage Characteristics • UV-resistant Technical data Material PE-HD Scope of delivery • Seal made of EPDM • Cap made of PP Art. no. DN d, ø [mm] d1, ø [mm] A [cm] H [cm] X1 [cm] X3 [cm] K1 [cm] K3 [cm] 1 364.451.16.1 60 / 60 63 63 9 17.5 10.5 7 4.5 365.451.16.1 70 / 70 75 75 9.5 17.5 10.5 7 3.5 0 366.451.16.1 90 / 90 90 90 11 20 12 8 3 0 367.451.16.1 100 / 100 110 110 9 24 13.5 10.5 4.5 0 368.451.16.1 125 / 100 125 110 13 25 15 10 6 1 369.451.16.1 150 / 100 160 110 15 35 21 14 12 4 Geberit HDPE access pipe 90° with oval service opening X K H h X K d A Application purposes • For building drainage Characteristics • UV-resistant Technical data Material PE-HD Scope of delivery • Seal made of EPDM • 1 cover, grey cast iron, dip-coated black Art. no. 367.454.16.1 DN d, ø [mm] A [cm] H [cm] h [cm] X [cm] K [cm] 100 110 12 40 28 20 3
368.454.16.1 125 125 12.5 41 28 20.5 4 369.454.16.1 150 160 14 43 28 21.5 4 370.454.16.1 200 200 17.5 65 38 32.5 5.5 371.454.16.1 250 250 20 58 38 29 3 372.454.16.1 300 315 23 62 38 31 8 22 Geberit HDPE Adapters Fittings 1.2.5 Adapters Geberit HDPE adapter socket 75 d1 d2 Application purposes • For building drainage • Suitable exclusively for connecting connection bends for WCs Characteristics • Pluggable for multiple combinations • With lip seal made of EPDM • UV-resistant Technical data Material PE-HD Art. no. 367.928.16.1 DN d1, ø [mm] d2, ø [mm] 90 / 100 90 110 1.2.6 Special fittings Geberit HDPE Sovent fitting a l L l1 l2 l2 d1/d2 d1 h2 B b b d1/d2 d1/d2 d2 d1 H h1 d2 h d Application purposes • For building drainage • For buildings with more than five floors (high-rise buildings) Characteristics • Six connection options, closed • UV-resistant Technical data Maximum discharge rat
e 12 l/s Material PE-HD Art. no. 367.614.16.1 DN d, ø [mm] d1, ø [mm] d2, ø [mm] a [cm] B [cm] b [cm] H [cm] h [cm] h1 [cm] h2 [cm] L [cm] l [cm] l1 [cm] l2 [cm] 100 / 100 / 70 110 110 75 13 18 8 74 21.5 17 35.5 29 10.5 5.5 9.5 23 Geberit HDPE Fittings Special fittings Geberit HDPE Sovent fitting l l2 a L l1 l2 d1/d2 d1 h2 H B d2 b b d1/d2 d1 d1/d2 h1 d2 h d Application purposes • For building drainage • For buildings with more than five floors (high-rise buildings) Technical data Maximum discharge rate 17 l/s Material PE-HD Characteristics • Six connection options, closed • UV-resistant Art. no. 369.001.16.1 DN d, ø [mm] d1, ø [mm] d2, ø [mm] a [cm] B [cm] b [cm] H [cm] h [cm] h1 [cm] h2 [cm] L [cm] l [cm] l1 [cm] l2 [cm] 150 / 100 / 70 160 110 75 13.3 23 9.5 71 19 17 35 34.3 13 8 11 Geberit HDPE protecting cap for weathering slates d H D Application purposes • For building
drainage • For enclosing ventilation pipes • For sliding on Characteristics • UV-resistant Technical data Material Art. no. d, ø [mm] D [cm] 364.989.16.1 63 10 7 365.989.16.1 75 12 9 366.989.16.1 90 14 PE-HD H [cm] 10 367.989.16.1 110 17 11 368.989.16.1 125 18 12 369.989.16.1 160 23 16 Geberit HDPE waste manifold 201 d1 55 3 24 223 d 75 3 d1 d Application purposes • For building drainage Characteristics • Four connection options, closed • UV-resistant Art. no. 367.612.16.1 24 d, ø [mm] d1, ø [mm] 110 56 Technical data Material PE-HD Geberit HDPE Welding joints Connections 1.3 Connections 1.3.1 Welding joints Geberit electrofusion coupling Geberit HDPE electrofusion coupling with integrated thermal fuse D H X D E E d H Application purposes • For building drainage • For high-tensile, permanent connection of pipes and fittings Characteristics • Can be welded with Geberit electrofusion machine ES
G 40/160, ESG 40/200 and ESG 3 • UV-resistant Technical data Installation temperature -10 - +40 °C Material PE-HD Art. no. DN d, ø [mm] 360.771.16.1 40 361.771.16.1 50 E E d Application purposes • For high-tensile, permanent connection of pipes and fittings Characteristics • With integrated thermal fuse • Can be welded with Geberit starter switch ESG-T2 • Can be welded with Geberit electrofusion machines ESG 3 • Heat-insulated • UV-resistant Technical data D [cm] H [cm] E [cm] X [cm] 40 5.2 6 2.8 6.2 6 2.8 0.3 -10 - +40 °C Material PE-HD 0.3 50 Installation temperature 363.771.16.1 56 56 6.8 6 2.8 0.3 364.771.16.1 60 63 7.6 6 2.8 0.3 365.771.16.1 70 75 8.9 6 2.8 0.3 366.771.16.1 90 90 10.4 6 2.8 0.3 367.771.16.1 100 110 12.5 6 2.8 0.3 368.771.16.1 125 125 14.2 6 2.8 0.3 369.771.16.1 150 160 17.8 6 2.8 0.3 Art. no. DN d, ø [mm] D [cm] H [cm] E [cm] 370.775.16.1 200 200 2
2.4 15 7.5 371.775.16.1 250 250 27.5 15 7.5 372.775.16.1 300 315 34.3 15 7.5 Accessories • Geberit accessories set for electrofusion with integrated thermal fuse → p. 367 25 Geberit HDPE Connections Push-in connections 1.3.2 Push-in connections Art. no. DN d, ø [mm] D [cm] H [cm] h [cm] E [cm] 370.700.16.1 E 25 40 12.5 17 - 20.5 11 250 29.1 42.5 17 17 - 20.5 14 300 315 36.1 45.8 17.5 17 - 20.5 14 Geberit HDPE ring seal socket 3 H 200 250 372.700.16.1 D 200 371.700.16.1 Geberit HDPE expansion socket with double flange K D h h d H d Application purposes • For building drainage • For horizontal and vertical installation Application purposes • For building drainage Characteristics • With round cord ring made of EPDM • UV-resistant Characteristics • Double flange for supporting the pipe bracket • With seal made of EPDM • UV-resistant Technical data Technical data Material Material PE-HD
DN PE-HD Scope of delivery • 1 protective cap Scope of delivery • 1 protective cap Art. no. Art. no. d, ø [mm] D [cm] H [cm] h [cm] E [cm] l [cm] DN K [cm] d, ø [mm] D [cm] H [cm] h [cm] 360.779.16.1 40 40 5.7 6.3 2 379.791.16.1 30 32 4.6 12.8 3.9 4 - 5.5 3 0 361.779.16.1 50 50 6.7 6.3 2 360.700.16.1 40 40 5.5 23.7 6.8 7 - 10 3 3 363.779.16.1 56 56 7.2 6.4 2 361.700.16.1 50 50 6.7 24 6.8 7 - 10 3 3 364.779.16.1 60 63 8 6.5 2 70 75 9.2 8.8 2.5 2.5 363.700.16.1 56 56 7.4 24 6.8 7 - 10 3 3 365.779.16.1 364.700.16.1 60 63 8.3 24.3 6.8 7 - 10.5 3 3 366.779.16.1 90 90 10.8 8.8 365.700.16.1 70 75 9.7 24.6 6.8 8 - 10.5 3 3 367.779.16.1 100 110 13.1 8.8 2.5 366.700.16.1 90 90 11.3 24.9 6.9 8 - 10.5 3 3 368.779.16.1 125 125 14.9 8.8 2.5 367.700.16.1 100 110 13.6 25.6 7.3 8 - 10.5 3 3.5 369.779.16.1 150 160 18.8 12.3 3 368.700.16.1 125 125 15.
7 26.1 7.4 8 - 11 3 3.5 369.700.16.1 150 160 19.5 26.8 7.4 8 - 11.5 3 3.5 Geberit HDPE ring seal socket, reduced D d1 Geberit HDPE expansion socket H D d E Application purposes • For building drainage H h d K Application purposes • For building drainage • For horizontal and vertical installation Technical data Material Art. no. Technical data 26 Characteristics • With round cord ring made of EPDM • UV-resistant PE-HD Scope of delivery • 1 protective cap Characteristics • With seal made of EPDM • UV-resistant Material K [cm] PE-HD DN d, ø [mm] d1, ø [mm] D [cm] H [cm] 361.752.16.1 56 / 50 57 50 6.7 4 364.752.16.1 60 / 56 63 56 7.2 4.4 Geberit HDPE Adapters on other product materials Connections 1.3.3 Adapters on other product materials Geberit adapter clamping connector Geberit HDPE support ring D H X E d1 E H di d Application purposes • For building drainage • For connecting pipes and f
ittings made of the same or different product materials Application purposes • For building drainage • For supporting Geberit HDPE pipes and fittings when using a clamping connector or adapter clamping connector Characteristics • With seal made of EPDM Technical data Material Technical data Material CrNi steel 1.4301 (EN 10088) Art. no. Stainless steel DN d, ø [mm] di, ø [mm] H [cm] 359.454.00.1 Art. no. 359.424.00.2 DN 50 d, ø [mm] d1, ø [mm] D [cm] H [cm] E [cm] X [cm] 48-50 48-50 6.3 5.7 2.7 0.3 50 50 44 4 359.455.00.1 56 56 50 4 359.456.00.1 60 63 57 4 70 75 69 4 4 7.5 5.7 2.7 0.3 359.457.00.1 58 7.5 5.7 2.7 0.3 359.458.00.1 90 90 83 68 8.3 5.7 2.7 0.3 7.8 5.7 2.7 0.3 359.459.00.1 100 110 101.4 4 63-64 7.8 5.7 2.7 0.3 359.462.00.1 125 125 115.2 4 68 8.3 5.7 2.7 0.3 359.463.00.1 140 129.2 4 68 68 8.3 5.6 2.6 0.4 359.464.00.1 160 147.6 4 75 68 9 5.7 2.7 0.3 70
75-76 75-76 8.8 5.7 2.7 0.3 70 75-76 78 9.3 5.7 2.7 0.3 359.435.00.2 70 75-76 83-84 9.8 5.7 2.7 0.3 359.436.00.2 70 75-76 89-90 10.3 5.7 2.7 0.3 359.437.00.2 90 89-90 83-84 11.1 5.7 2.7 0.3 359.438.00.2 90 89-90 89-90 10.3 5.7 2.7 0.3 359.439.00.2 90 89-90 96 11.1 6.9 3.3 0.3 359.440.00.2 100 108-110 106 12.5 5.7 2.7 0.3 359.441.00.2 100 108-110 108-110 12.5 5.7 2.7 0.3 359.425.00.2 50 54-56 359.426.00.2 56 56 359.427.00.2 56 56 359.428.00.2 60 63 60 359.429.00.2 60 63-64 359.430.00.2 60 63-64 359.431.00.2 70 359.432.00.2 70 359.433.00.2 359.434.00.2 54-56 359.442.00.2 100 108-110 114-116 13.1 6.9 3.3 125 125 125 14 5.7 2.7 125 125 131-135 15 6.9 3.3 0.3 359.445.00.2 125 125 140-141 15.6 6.9 3.3 0.3 359.446.00.2 125 135 135 15 6.9 3.3 0.3 312.140.00.2 125 135 140 15.5 6.9 3.1 0.7 359.447.00.2 125 140-141 140-141 15.5 6.9 3.3 150 159-160 152 17.
5 6.9 3.3 0.3 359.449.00.2 150 159-160 159-160 17.5 6.9 3.3 0.3 359.450.00.2 150 159-160 168 18.3 6.9 3.3 200 210 22.5 6.9 3.3 0.3 h d1 0.3 359.451.00.2 H 0.3 359.448.00.2 d 0.3 359.444.00.2 Geberit HDPE straight adapter to lead 0.3 359.443.00.2 150 210 Application purposes • For building drainage • For soft and hard soldering • For transitions from Geberit HDPE to lead Technical data Material Brass Scope of delivery • Compression joint Art. no. 359.330.00.1 d, ø [mm] d1, ø [mm] H [cm] h [cm] 56 54 8.3 3.5 27 Geberit HDPE Connections Adapters on other product materials Geberit HDPE straight adapter to cast Geberit HDPE straight adapter to stoneware d1 d1 H H h h d d Application purposes • For building drainage • For use with standard CV clamping connector Characteristics • Can be used without support ring • Without socket • UV-resistant Characteristics • UV-resistant Technical data Materia
l PE-HD Art. no. DN d, ø [mm] d1, ø [mm] Application purposes • For building drainage • For inserting in stoneware couplings • For connecting pipe ends with stoneware connectors • For connecting seals and clamping connectors made of stoneware H [cm] Technical data h [cm] 370.738.16.1 200 200 212 16 8 371.738.16.1 250 250 274 16 11.5 372.738.16.1 300 315 326 16 11.5 Material Art. no. 367.739.16.1 PE-HD d, ø [mm] d1, ø [mm] H [cm] h [cm] 110 132 15.2 7 d 35 105 63 d1 Application purposes • For building drainage • For transitions from Geberit HDPE to PVC with with an inner diameter of 100–101 mm Characteristics • UV-resistant Technical data Material Art. no. 359.461.16.1 28 PE-HD d, ø [mm] d1, ø [mm] 110 99 125 159 15.5 7 160 186 15.5 7 370.739.16.1 200 242 20 13 371.739.16.1 250 298 20 13 372.739.16.1 Geberit HDPE straight adapter to PVC 368.739.16.1 369.739.16.1 315 352 20 12 Geberi
t HDPE Adapters on other product materials Connections Geberit HDPE straight adapter with shrink-fitted sleeve di h1 H h AB K d Application purposes • For building drainage • For shrinking on connection pieces and pipe ends Characteristics • UV-resistant Technical data Material PE-HD Scope of delivery • Seal made of EPDM • Round cord ring made of EPDM Art. no. DN d, ø [mm] AB1 [mm] AB2 [mm] di, ø [mm] H [cm] h [cm] h1 [cm] K [cm] 152.197.16.1 50 50 60 - 67 53 - 60 70 27.5 22 5.5 17 152.198.16.1 50 50 67 - 74 60 - 67 80 28.5 23 5.5 17 152.651.16.1 50 50 53 - 54 48 - 49 60 30 24 6 17 152.652.16.1 50 50 80 - 84 73 - 77 90 30.5 23.5 7 17 152.149.16.1 56 56 60 - 67 53 - 60 70 24.5 19 5.5 14 60 - 67 80 24.5 19 5.5 14 60 26.5 20.5 6 14 152.150.16.1 56 56 67 - 74 152.654.16.1 56 56 53 - 54 152.657.16.1 60 63 60 - 67 73 26.5 20.5 6 14 152.658.16.1 60 63 67 - 74 80 26.5 19
7.5 14 152.151.16.1 70 75 80 - 84 90 24.5 17.5 7 12 152.152.16.1 70 75 67 - 74 80 25 19 6 12 12 73 - 77 152.661.16.1 70 75 90 - 94 100 28 19 9 366.550.16.1 90 90 84 - 98 110 17 7 10 0 367.550.16.1 100 110 102 - 126 100 - 124 140 18 8 10 0 367.551.16.1 100 110 102 - 111 100 - 109 125 16 6 10 0 1 368.550.16.1 125 125 116 - 136 115 - 134 150 18 8 10 369.550.16.1 150 160 148 - 180 149 - 176 195 20 8 12 1 369.551.16.1 150 160 189 - 212 187 - 220 230 30 12 18 5 370.550.16.1 200 200 189 - 212 187 - 220 230 30 13 17 2 371.550.16.1 250 250 236 - 260 234 - 250 280 30 13 17 2 372.550.16.1 300 315 297 - 333 295 - 323 355 30 14 16 2 29 Geberit HDPE Connections Screwing joints 1.3.4 Screwing joints Geberit HDPE threaded connector with compression joint Geberit HDPE threaded connector with screw cap D H D Rg Rg h2 h h1 H h2 h d h1 d Application purposes • For buil
ding drainage Application purposes • For building drainage Characteristics • Union nut made of PP • Compression ring made of PP • Seal made of EPDM • UV-resistant Characteristics • With seal made of EPDM • Cap made of PP • UV-resistant Technical data Technical data Material Material Art. no. Scope of delivery • 1 protective cap Art. no. 379.740.16.1 PE-HD PE-HD DN 30 DN d, ø [mm] Rg [“] D [cm] h [cm] h1 [cm] h2 [cm] 1 379.750.16.1 30 32 44 x 1/8 5.6 4.5 2.6 3 d, ø [mm] Rg [“] D [cm] H [cm] h [cm] h1 [cm] h2 [cm] 360.750.16.1 40 40 52 x 1/6 6.4 6.3 3.3 5 2 361.750.16.1 50 50 62 x 1/6 7.4 6.3 3.3 5 2 32 44 x 1/8 5.6 4.5 2.6 3 1 363.750.16.1 56 56 70 x 1/6 8.5 6.8 3.5 5 2 364.750.16.1 60 63 75 x 1/6 9 6.8 4.2 5 2 365.750.16.1 70 75 95 x 1/6 11.2 9.6 4.5 7.5 2.5 366.750.16.1 90 90 110 x 1/4 12.9 9.7 4.8 7.5 2.5 367.750.16.1 100 110 130 x 1/4 14.9 9.7 6.
3 7.5 2.5 360.740.16.1 40 40 52 x 1/6 361.740.16.1 50 50 62 x 1/6 363.740.16.1 56 56 70 x 1/6 364.740.16.1 60 63 75 x 1/6 365.740.16.1 70 75 95 x 1/6 6.4 6.3 3.3 5 2 7.4 6.3 3.3 5 2 8.5 6.8 3.5 5 2 9 6.8 4.2 5 2 11.2 9.6 4.5 7.5 2.5 366.740.16.1 90 90 110 x 1/4 12.9 9.7 5 7.5 2.5 367.740.16.1 100 110 130 x 1/4 14.9 9.7 6.5 7.5 2.5 Geberit HDPE threaded connector with screw cap D Rg H d Application purposes • For building drainage • For cleaning and checking pipe sections Characteristics • Round opening • With seal made of EPDM • UV-resistant Technical data Material Art. no. 367.471.16.1 30 H [cm] PE-HD d, ø [mm] Rg [“] D [cm] H [cm] 110 130 x 1/4 14.3 4 Geberit HDPE Screwing joints Connections Geberit HDPE compression joint Geberit HDPE adapter with female thread D Rp d H H d Rg Application purposes • For building drainage Application purposes • For building drainage C
haracteristics • With support ring made of chrome nickel steel • UV-resistant Scope of delivery • Seal made of EPDM • Compression ring made of PP • Union nut made of PP Technical data Material Art. no. d, ø [mm] Rg [“] D [cm] H [cm] 363.749.16.1 56 70 x 1/6 8.5 6.8 364.749.16.1 63 75 x 1/6 9 6.8 PE-HD 360.719.16.1 40 40 40 361.719.16.1 50 361.720.16.1 361.721.16.1 H d, ø [mm] 360.721.16.1 R DN 360.720.16.1 Geberit HDPE adapter with male thread Art. no. Rp [“] H [cm] 40 1/2 5.5 40 3/4 5.5 40 1 5.5 50 1/2 6 50 50 3/4 6 50 50 1 6 6 361.722.16.1 1 1/2 6 56 56 2 6.5 60 63 2 7 365.725.16.1 Characteristics • With support ring made of chrome nickel steel • UV-resistant 1 1/4 50 364.724.16.1 Application purposes • For building drainage 50 50 363.724.16.1 d 50 361.723.16.1 70 75 2 1/2 7 Geberit HDPE straight adapter with male thread and plain end d Technical data Material H PE-HD
Art. no. DN d, ø [mm] R [“] 50 50 1 1/4 6 361.727.16.1 50 50 1 1/2 6 R H [cm] 361.726.16.1 h 363.728.16.1 56 56 2 6.5 364.728.16.1 60 63 2 6.5 365.729.16.1 70 75 2 1/2 7 Application purposes • For building drainage Characteristics • Compression ring made of PP • With seal made of EPDM Technical data Material Brass Scope of delivery • 1 protective cap • Compression joint made of PP Art. no. DN d, ø [mm] R [“] H [cm] h [cm] 359.309.00.1 50 50 1 1/2 6.5 2.7 359.311.00.1 56 56 2 6.5 2.7 31 Geberit HDPE Connections Flange connections Geberit HDPE straight adapter with female thread and plain end 1.3.5 Flange connections Geberit HDPE blind flange d m H h H Rp k D Application purposes • For building drainage Application purposes • For building drainage Characteristics • Compression ring made of PP • With seal made of EPDM Characteristics • Plastic coated Technical data Technical da
ta Material Brass Material Scope of delivery • 1 protective cap • Compression joint made of PP Art. no. 359.313.00.1 DN Art. no. DN d, ø [mm] 50 50 56 / 60 56 / 63 361.748.00.1 d, ø [mm] Rp [“] H [cm] h [cm] 56 2 6 1.8 56 Steel 363.748.00.1 D [cm] k [cm] m [cm] H n [cm] [Pc.] PN [bar] 15 11 1.8 1.2 4 10 16.5 12.5 1.8 1.2 4 10 365.748.00.1 70 75 18.5 14.5 1.8 1.2 4 10 366.748.00.1 90 90 20 16 1.8 1.4 8 10 d H 100 110 22 18 1.8 1.4 8 10 125 125 25 21 1.8 1.4 8 10 369.748.00.1 Geberit HDPE straight adapter with compression joint, for glueing 367.748.00.1 368.748.00.1 150 160 28.5 24 2.3 1.4 8 10 370.748.00.1 200 200 34 29.5 2.3 1.4 8 3.2 371.748.00.1 250 250 39.5 35 2.3 1.6 12 3.2 372.748.00.1 300 315 44.5 40 2.3 2 12 3.2 To order additionally • Flange gasket made of EPDM h d1 Geberit HDPE loose flange Application purposes • For building drainage Technica
l data m d k Material D PVC Application purposes • For building drainage • For combining with Geberit HDPE weld-neck collars Scope of delivery • Compression joint made of PP Art. no. H d, ø [mm] d1, ø [mm] H [cm] h [cm] 359.421.00.1 56 50 8 4 359.423.00.1 56 63 7.8 4 Characteristics • Plastic coated Technical data Material Art. no. Steel DN d, ø [mm] D [cm] k [cm] m [cm] H [cm] n PN [Pc.] [bar] 361.745.00.1 50 50 15 11 1.8 1.2 4 10 363.745.00.1 56 / 60 56 / 63 16.5 12.5 1.8 1.2 4 10 365.745.00.1 70 75 18.5 14.5 1.8 1.2 4 10 366.745.00.1 90 90 20 16 1.8 1.4 8 10 367.745.00.1 100 110 22 18 1.8 1.4 8 10 368.745.00.1 125 125 25 21 1.8 1.4 8 10 369.745.00.1 150 160 28.5 24 2.3 1.4 8 10 370.745.00.1 200 200 34 29.5 2.3 1.4 8 3.2 371.745.00.1 250 250 39.5 35 2.3 1.6 12 3.2 372.745.00.1 300 315 44.5 40 2.3 2 12 3.2 To order additionally • Flange gasket m
ade of EPDM 32 Geberit HDPE Flange bushings Connections 1.3.6 Flange bushings Geberit HDPE bolt set M Geberit HDPE flange bushing L D H Application purposes • For building drainage h d Characteristics • Zinc-plated Application purposes • For building drainage Technical data Material Characteristics • UV-resistant Steel Technical data Scope of delivery • Bolt • 2 washers • Nut Art. no. h Material Art. no. Colour / Surface d, ø [mm] M [mm] PE-HD DN d, ø [mm] D [cm] H [cm] h [cm] L [cm] 379.772.16.1 30 32 3.8 5.2 2.4 40 40 4.7 6.8 3.2 361.743.26.1 galvanized 50 - 75 16 7 360.772.16.1 366.743.26.1 galvanized 90 - 125 16 8 361.772.16.1 50 50 5.7 6.8 3.2 56 56 6.5 5.8 2.7 369.743.26.1 galvanized 160 - 200 20 9 363.772.16.1 371.743.26.1 galvanized 250 20 10 364.772.16.1 60 63 7 7.2 3.4 11 365.772.16.1 70 75 9 7.2 3.4 372.743.26.1 galvanized 315 20 366.772.16.1 90 90 10
.3 9.2 4.4 367.772.16.1 100 110 12 11.7 5.6 Geberit HDPE weld-neck collar D h1 H h d D1 Application purposes • For building drainage • For combining with Geberit HDPE loose flanges Technical data Material PE-HD Art. no. DN d, ø [mm] D [cm] D1 [cm] H [cm] h [cm] h1 [cm] 361.744.16.1 50 50 8 5.4 6 4.2 0.8 363.744.16.1 56 56 9 6.8 6 3.6 0.8 364.744.16.1 60 63 9 6.8 6 3.7 0.8 365.744.16.1 70 75 11 7.8 6.5 4 0.9 366.744.16.1 90 90 12.8 9.6 7 4.4 1.1 367.744.16.1 100 110 14.8 11.6 7.5 4.8 1.2 1.4 368.744.16.1 125 125 16 13.1 8 5 369.744.16.1 150 160 19.8 16.5 9 5.1 1.7 370.744.16.1 200 200 26 20.6 7.8 5.4 1.4 371.744.16.1 250 250 32.5 25.6 7.8 5.2 1.6 372.744.16.1 300 315 37 31.5 10 7 2 33 Geberit HDPE Waste fittings Connection bends 1.4 Waste fittings 1.4.1 Connection bends Geberit HDPE connection bend 88.5° D di H d X2 K X1 Application purposes • For building drain
age • For sanitary appliances with vertical outlet Characteristics • UV-resistant Technical data Material PE-HD Scope of delivery • 1 protective cap Art. no. 367.880.16.1 DN d, ø [mm] di, ø [mm] D [cm] H [cm] X1 [cm] X2 [cm] K [cm] 100 110 120 13.2 12 30 6 22 To order additionally • Sleeve Geberit HDPE connection bend 88.5° with lateral supplementary connections D L di H d1 d x2 d A 45 d1 L1 x1 Application purposes • For building drainage • For sanitary appliances with vertical outlet Characteristics • Lateral connections raised and closed • UV-resistant Technical data Material Art. no. 367.888.16.1 34 PE-HD d, ø [mm] d1, ø [mm] A [cm] di, ø [mm] D [cm] H [cm] L [cm] L1 [cm] X1 [cm] X2 [cm] 110 50 2 110 11.6 17 17.5 14 30 6 Geberit HDPE Connection bends Waste fittings Geberit HDPE connection bend 90° for sleeve Geberit HDPE double connection bend 90° A X2 a d1 di X1 a d d1 Applica
tion purposes • For building drainage d1 H K d Characteristics • Long leg • UV-resistant Application purposes • For building drainage • For vertical installation • For connecting sanitary appliances with horizontal outlet • For Geberit Duofix and Geberit Kombifix elements for wall-hung WC • For Geberit Sanbloc building blocks for wall-hung WC Technical data Material PE-HD Art. no. DN d, ø [mm] d1, ø [mm] di, ø [mm] X1 [cm] X2 [cm] 361.080.16.1 50 50 50 44 7.5 10 363.080.16.1 56 56 56 50 7.5 10 363.083.16.1 56 56 50 44 7.5 10 364.084.16.1 56 56 63 57 7.5 20 Characteristics • With seal made of EPDM • UV-resistant Technical data Material PE-HD Scope of delivery • 2 protective caps Geberit HDPE connection bend 90° for wallhung WC, with extension Art. no. DN d, ø [mm] d1, ø [mm] A [cm] 367.903.16.1 100 / 100 / 100 110 110 367.923.16.1 100 / 90 / 90 110 90 A a d1 H a [cm] H [cm] K [cm]
28.5 11 20.5 5 27.5 10.5 32.5 19 K Geberit HDPE double connection bend 90° for sleeve d A Application purposes • For building drainage • For connecting sanitary appliances with horizontal outlet • For Geberit Kombifix elements for wall-hung WC • For vertical installation di H d1 di K d Characteristics • With seal made of EPDM • UV-resistant Application purposes • For building drainage • For washbasins, urinals and bidets • For sleeves Technical data Material Characteristics • UV-resistant PE-HD Scope of delivery • 1 protective cap Art. no. d1 Technical data DN d, ø [mm] d1, ø [mm] A [cm] a [cm] H [cm] K [cm] 366.925.16.1 90 / 90 90 90 7.5 4.5 22.5 13 367.792.16.1 100 / 100 110 110 7.5 4.5 22.5 13 367.925.16.1 100 / 90 110 90 7.5 4.5 22.5 13 Material Art. no. PE-HD DN d, ø [mm] d1, ø [mm] A [cm] di, ø [mm] H [cm] K [cm] 363.472.16.1 56 / 50 56 50 15.5 365.472.16.1 70 / 56
75 56 15.5 44 12 3 50 13.5 9 35 Geberit HDPE Waste fittings Coupling sockets 1.4.2 Coupling sockets Geberit HDPE double connection bend 90°, offset Geberit HDPE connection ring seal socket d1 H d L a A K D d a di d1 H h d Application purposes • For building drainage • For horizontal installation • For connecting sanitary appliances with horizontal outlet Application purposes • For building drainage • For connecting sanitary appliances Characteristics • With seal made of EPDM • UV-resistant Characteristics • With seal made of EPDM • UV-resistant Technical data Technical data Material PE-HD Material Scope of delivery • 2 protective caps Art. no. 367.485.16.1 PE-HD Scope of delivery • 1 protective cap DN d, ø [mm] 100 / 90 / 90 110 d1, ø A a H [mm] [cm] [cm] [cm] 90 27.5 10.5 10 L K [cm] [cm] 34 12 Art. no. DN d, ø [mm] di, ø [mm] D [cm] H [cm] h [cm] 379.768.16.1 30 32 32 4.6 2.5 0.5
Geberit HDPE connection ring seal socket with lip seal D d1 L d Application purposes • For building drainage • For connecting sanitary appliances with horizontal outlet • For Geberit Kombifix elements for wall-hung WC Characteristics • With seal made of EPDM • UV-resistant Technical data Material PE-HD Scope of delivery • 1 protective cap Art. no. DN d, ø [mm] d1, ø [mm] D [cm] L [cm] 366.941.16.1 36 90 / 90 90 90 11.1 4 367.941.16.1 100 / 90 110 90 11.1 4 Geberit HDPE Straight connectors Waste fittings 1.4.3 Straight connectors Geberit HDPE straight connector D di H h K d Application purposes • For building drainage • For sanitary appliances with vertical outlet • For sleeves Characteristics • UV-resistant Technical data Material Art. no. 367.885.16.1 PE-HD DN d, ø [mm] di, ø [mm] D [cm] H [cm] h [cm] K [cm] 100 110 120 13.2 38 33 26 To order additionally • Sleeve Geberit HDPE straight connecto
r with ring seal socket d1 d D K l L Application purposes • For building drainage • For connecting sanitary appliances with horizontal outlet • For Geberit Duofix and Geberit Kombifix elements for wall-hung WC • For Geberit Sanbloc building blocks for wall-hung WC Characteristics • With seal made of EPDM • UV-resistant Technical data Material PE-HD Scope of delivery • 1 protective cap Art. no. DN d, ø [mm] d1, ø [mm] D [cm] L [cm] l [cm] K [cm] 366.887.16.1 90 / 90 90 90 11.2 31 27.5 24 367.887.16.1 100 / 90 110 90 11.2 34.5 31.5 28 37 Geberit HDPE Waste fittings P-traps 1.4.4 P-traps Geberit HDPE P-trap A h1 K h d H a A1 Application purposes • For building drainage • • • Characteristics • Outlet, horizontal • Inlet vertical • Lengthways non-positive Art. no. DN 364.730.16.1 60 70 Depth of water seal 75 366.730.16.1 90 100 A1 [cm] a [cm] H [cm] PE-HD h [cm] h1 [cm] K [cm] 30.5 9.
5 20.5 5 3.4 16 34.5 25 13.5 29.5 7 3.4 14 41 27 14 27 5 5.6 20 5.9 110 18.5 5.4 46 31 16 31.5 6 5.6 22 90 367.730.16.1 A [cm] ≥ 70 mm Material 63 365.730.16.1 Technical data Discharge rate d, ø [mm] Union nut made of PP With seal made of EPDM UV-resistant 1.4.5 Suction traps Geberit HDPE suction trap with service opening E 20 0 D H h d A Application purposes • For building drainage Technical data Depth of water seal Material Characteristics • With expansion socket • With cleaning opening 50 mm • Cap made of PP • With seal made of EPDM • UV-resistant Art. no. DN d, ø [mm] 70 mm PE-HD Scope of delivery • 1 protective cap Discharge rate A [cm] D [cm] H [cm] h [cm] E [cm] 365.813.16.1 70 75 3.8 19.8 9.8 66.7 16.6 8 - 10.5 367.813.16.1 100 110 9.6 28.8 13.6 80.8 21.7 8 - 10.5 38 Geberit HDPE Air admittance valves Accessories 1.5 Accessories 1.5.1 Air admittance valves Geberit a
ir admittance valve GRB50 for Geberit drainage systems L Geberit air admittance valve GRB90 for Geberit HDPE L B h B H H h d/G d d d1 / d2 Application purposes • For ventilating discharge pipes • For building drainage • For gravity drainage systems • For discharge pipes with pipe dimensions ø 32 mm, ø 40 mm and ø 50 mm Characteristics • Anti-vacuum valve in accordance with EN 12380, Type A I d1 Application purposes • For ventilating discharge pipes • For building drainage • For gravity drainage systems • For discharge pipes with pipe dimensions ø 75 mm, ø 90 mm and ø 110 mm Characteristics • Thermal insulation integrated in housing • Anti-vacuum valve in accordance with EN 12380, Type A I Technical data Operating temperature di -20 - +60 °C Scope of delivery • Thermal insulation cap • Sleeve • Adapter Technical data Operating temperature Art. no. DN d, ø [mm] G [“] d1, ø [mm] 303.900.00.1 50 50 1 1/2
d2, ø B [mm] [cm] 32 40 H h [cm] [cm] 7 7.3 3.5 L [cm] 8 -20 - +60 °C Scope of delivery • Sleeve Art. no. 310.006.00.1 d, ø [mm] d1, ø [mm] di, ø [mm] B [cm] H [cm] h [cm] L [cm] 90 103.5 75 12 14.1 5 19.5 Geberit air admittance valve GRB50 for Geberit drainage systems L B h H d/G d1 Application purposes • For ventilating discharge pipes • For building drainage • For gravity drainage systems • For discharge pipes with pipe dimensions ø 50 mm, ø 56 mm and ø 63 mm Characteristics • Anti-vacuum valve in accordance with EN 12380, Type A I Technical data Operating temperature -20 - +60 °C Scope of delivery • Thermal insulation cap • Sleeve Art. no. 305.900.00.1 d, ø [mm] G [“] d1, ø [mm] B [cm] H [cm] h [cm] L [cm] 50 1 1/2 57 7 7.3 3.5 8 39 Geberit HDPE Accessories Pipe brackets 1.5.2 Pipe brackets Geberit pipe bracket with threaded socket G 1/2, adjustable Geberit pipe bracket with threaded soc
ket M10, adjustable G M L1/L2 d1 d2 L1/L2 d1 d2 Application purposes • For building drainage • For fastening to threaded pipes • For fastening pipes to ceilings and walls • For anchor-point fastening of pipes in combination with electrofusion tapes • For sliding bracket fastening of pipes in connection with plastic insert strips for pipe brackets Characteristics • Adjustable • Operable with one hand • Female thread • Zinc-plated Application purposes • For fastening with threaded rods • For fastening pipes to ceilings and walls • For sliding bracket fastening of pipes in connection with plastic insert strips for pipe brackets Characteristics • Adjustable • Operable with one hand • Female thread • Zinc-plated Technical data Material Technical data Steel Art. no. Steel Art. no. DN G [“] d1, ø [mm] d2, ø [mm] L1 [cm] L2 [cm] 360.841.00.2 40 1/2 40 48 3.5 3.9 361.841.00.2 50 1/2 50 58 4 4.4 363.841.0
0.2 56 1/2 56 64 4.3 4.7 364.841.00.2 60 1/2 63 71 4.7 5.1 365.841.00.2 70 1/2 75 83 5.3 5.7 366.841.00.2 90 1/2 90 98 6 6.4 367.841.00.2 100 1/2 110 118 7 7.4 368.841.00.2 125 1/2 125 133 7.8 8.2 369.841.00.2 150 1/2 160 168 9.5 9.9 Accessories • Geberit plastic insert strip for pipe bracket → p. 42 40 DN d1, ø [mm] d2, ø [mm] 360.843.00.2 Material M [mm] L1 [cm] L2 [cm] 40 40 361.843.00.2 50 50 48 10 3.5 3.9 58 10 4 4.4 4.7 363.843.00.2 56 56 64 10 4.3 364.843.00.2 60 63 71 10 4.7 5.1 365.843.00.2 70 75 83 10 5.3 5.7 366.843.00.2 90 90 98 10 6 6.4 367.843.00.2 100 110 118 10 7 7.4 368.843.00.2 125 125 133 10 7.8 8.2 369.843.00.2 150 160 168 10 9.5 9.9 Accessories • Geberit plastic insert strip for pipe bracket → p. 42 Geberit HDPE Pipe brackets Accessories Geberit pipe bracket with threaded socket G 1 G Geberit pipe bracket with threaded socket M
8 / M10 M L d L d Application purposes • For fastening to threaded pipes • For fastening pipes to ceilings and walls • For sliding bracket fastening of pipes in connection with plastic insert strips for pipe brackets • For anchor-point fastening of pipes in combination with double-flange bushings Application purposes • For fastening with threaded rods • For building drainage • For fastening pipes to ceilings and walls • For anchor-point fastening of pipes in combination with electrofusion tapes • For sliding bracket fastening of pipes Characteristics • Female thread • Zinc-plated Characteristics • Threaded fastening M8 or M10 • Female thread • Operable with one hand • Zinc-plated Technical data Material Steel Technical data Art. no. G [“] L [cm] Material 200 1 14.8 Art. no. 250 1 17.3 315 1 20.5 DN d, ø [mm] 370.840.00.1 200 371.840.00.1 250 372.840.00.1 300 Accessories • Geberit plastic insert str
ip for pipe bracket → p. 42 Steel d, ø [mm] M [mm] L [cm] 360.832.00.2 40 8 / 10 4.3 361.832.00.2 50 8 / 10 4.8 363.832.00.2 56 8 / 10 5.1 364.832.00.2 63 8 / 10 5.5 365.832.00.2 75 8 / 10 6.1 366.832.00.2 90 8 / 10 6.8 367.832.00.2 110 8 / 10 7.8 368.832.00.2 125 8 / 10 8.6 369.832.00.2 160 8 / 10 10.3 Accessories • Geberit plastic insert strip for pipe bracket → p. 42 41 Geberit HDPE Accessories Fastenings for pipe brackets 1.5.3 Fastenings for pipe brackets Geberit HDPE double-flange bushing Geberit electrofusion tape for anchor point D D h2 d1 h1 H h h2 d d Application purposes • For building drainage • For anchor-point fastening of pipes in connection with pipe brackets Characteristics • One-piece • Can be welded with Geberit electrofusion machines Technical data Art. no. H h h1 Application purposes • For building drainage • For anchor-point fastening of pipes in connection with pipe brack
ets Material d PE-HD DN d, ø [mm] D [cm] H [cm] h [cm] h1 [cm] 200 200 21.3 19.1 4.1 6 1.5 371.751.16.1 250 250 26.2 20.1 4.1 6 2 372.751.16.1 300 315 32.6 20.1 4.1 6 Technical data h2 [cm] 2 370.751.16.1 Material PE-HD Art. no. DN d, ø [mm] d1, ø [mm] D [cm] H [cm] h [cm] 361.776.16.1 L 6.6 6 3 64 7.2 6 3 60 63 71 7.9 6 3 365.776.16.1 h 70 75 83 9.1 6 3 90 90 98 10.6 6 3 367.776.16.1 H 100 110 118 12.6 6 3 368.776.16.1 125 125 133 14.1 6 3 3 369.776.16.1 Application purposes • For building drainage • For sliding bracket fastening of pipes in connection with pipe brackets Technical data Art. no. 58 56 366.776.16.1 B b Material 50 56 364.776.16.1 Geberit plastic insert strip for pipe bracket 50 363.776.16.1 150 160 168 17.6 6 370.776.16.1 200 200 208 21.6 6 3 371.776.16.1 250 250 258 26.6 6 3 Geberit electrofusion tape for anchor point D PE-LD d1 DN d,
ø [mm] B [cm] b [cm] H [cm] h [cm] 362.846.00.1 40-150 40-160 3.8 3.1 0.4 0.2 10 370.846.00.1 200-300 200-315 4.8 4.1 0.4 0.2 10 d L [m] H h d Application purposes • For building drainage • For anchor-point fastening of pipes in connection with pipe brackets Characteristics • Two-piece • Can be welded with Geberit electrofusion machines Technical data Material PE-HD Scope of delivery • Set of 2 pieces Art. no. 372.776.16.1 42 DN d, ø [mm] d1, ø [mm] D [cm] H [cm] h [cm] 300 315 323 33.1 6 3 Geberit HDPE Fastenings for pipe brackets Accessories Geberit base plate, square, two-hole, with threaded socket M10 / G 1/2 Geberit base plate, square, two-hole, with threaded socket G M/G h G B hH H B a a L L Application purposes • For fastening pipe brackets to the building structure • For fastening pipes to ceilings and walls • For anchor point and sliding bracket fastenings Application purposes • For
building drainage • For fastening pipe brackets to the building structure • For fastening pipes to ceilings and walls • For anchor point and sliding bracket fastenings Characteristics • Male thread • Female thread • Zinc-plated • Two fastening points Characteristics • Female thread • Zinc-plated • Two fastening points Technical data Material Steel Technical data Material Art. no. 362.851.26.1 G [“] M [mm] a [cm] B [cm] H [cm] h [cm] L [cm] 1/2 10 8.5 4 1.5 0.5 12 Art. no. Steel G [“] a [cm] B [cm] H [cm] h [cm] L [cm] 362.826.26.1 Geberit base plate, square, two-hole, with threaded socket M8 / M10 M hH B 1/2 9 4 2.1 0.6 12 362.828.26.1 1 9 4 2.6 0.6 12 Geberit base plate, round, three-hole, with threaded socket M10 M/G h H a a D L Application purposes • For building drainage • For fastening pipe brackets to the building structure • For fastening pipes to ceilings and walls • For fastening
support rails to the building structure • For sliding bracket fastening of pipes Characteristics • Female thread • Zinc-plated • Two fastening points Application purposes • For building drainage • For fastening pipe brackets to the building structure • For fastening pipes to ceilings and walls • For fastening support rails to the building structure Characteristics • Female thread • Zinc-plated • Three fastening points Technical data Material Technical data Steel Material Art. no. M [mm] a [cm] B [cm] H [cm] h [cm] L [cm] 362.848.26.1 8 / 10 5.4 3 1.9 0.3 8 Art. no. 362.837.26.1 Steel M [mm] a [cm] D [cm] H [cm] h [cm] 10 5 7 1.6 0.4 43 Geberit HDPE Accessories Fastenings for pipe brackets Geberit base plate, round, three-hole, with threaded socket G 1/2 M /G Geberit threaded pipe D L h H G a D Application purposes • For building drainage • For fastening pipe brackets to the building structure • For a
nchor point and sliding bracket fastenings • For fastening pipes to ceilings and walls Characteristics • Female thread • Zinc-plated • Three fastening points Material Art. no. Material 362.839.26.1 Characteristics • Female thread continuously threaded • Zinc-plated Technical data Technical data Art. no. Application purposes • For fastening Geberit pipe brackets to base plates • For building drainage • For anchor point and sliding bracket fastenings Steel 362.857.26.1 G [“] a [cm] D [cm] H [cm] h [cm] 1/2 5 7 1.9 0.4 Steel G [“] D [cm] L [m] 1/2 2.5 1 Geberit hanger bolt Geberit threaded rod Application purposes • For fastening Geberit pipe brackets with coupling M10 to wood constructions • For building drainage Application purposes • For fastening Geberit pipe brackets to base plates • For building drainage • For fastening Geberit Pluvia support rails to base plates • For sliding bracket fastenings Cha
racteristics • Zinc-plated Art. no. 362.833.00.1 L [cm] 10 Geberit double nipple M Technical data Material Steel Scope of delivery • Protective shell Art. no. 362.836.00.1 H SW G M [mm] L [cm] 10 50 Application purposes • For building drainage Characteristics • Reduced • Zinc-plated Technical data Material Steel Art. no. 362.856.26.1 44 Colour / Surface galvanized G [“] M [mm] H [cm] SW [mm] 1/2 10 2.8 22 Geberit HDPE Support shells Accessories 1.5.4 Support shells 1.5.5 Sealings Geberit support shell, zinc-plated and coated Geberit HDPE weld-on cap L di s Application purposes • For sanitary, heating and industrial installations • For fastening pipes • For stabilising Geberit fastening systems Characteristics • Coated • Steel, black coated exterior • Zinc-plated Material Art. no. Material 360.850.00.1 Characteristics • UV-resistant Technical data Technical data Art. no. Application purposes • Fo
r building drainage • For butt welding Steel DN 40 di, ø [mm] 40 s [mm] 0.75 L [m] 3 361.850.00.1 50 50 0.75 3 363.850.00.1 56 56 0.75 3 364.850.00.1 60 63 0.75 3 365.850.00.1 70 75 0.75 3 366.850.00.1 90 90 0.75 3 367.850.00.1 100 110 0.75 3 368.850.00.1 125 125 0.75 3 PE-HD DN d, ø [mm] 379.812.16.1 30 32 360.812.16.1 40 40 50 361.812.16.1 50 363.812.16.1 56 56 364.812.16.1 60 63 365.812.16.1 70 75 366.812.16.1 90 90 367.812.16.1 100 110 368.812.16.1 125 125 369.812.16.1 150 160 370.812.16.1 200 200 Geberit HDPE protective cap for pipe end D H d Application purposes • For building drainage • For protecting pipe ends Technical data Material Art. no. PE-LD Colour / Surface DN d, ø [mm] D [cm] H [cm] 360.802.92.1 yellow 40 40 4.2 3.5 361.802.92.1 yellow 50 50 5.2 3.5 363.802.92.1 yellow 56 56 5.8 3.5 364.802.92.1 yellow 60 63 6.5 3.5 365.802.92.1 yellow 70 75 7.
8 3.5 366.802.92.1 yellow 90 90 9.3 3.5 367.802.92.1 yellow 100 110 11.3 4 368.802.92.1 yellow 125 125 12.9 4 369.802.92.1 yellow 150 160 16.4 3 45 Geberit HDPE Accessories Seals 1.5.6 Seals Geberit HDPE screw cap D Geberit HDPE flange gasket d H H d Rg di D Application purposes • For building drainage Application purposes • For building drainage • For creating flange connections Characteristics • With seal made of EPDM Characteristics • With seal made of EPDM Technical data Material PP Technical data Art. no. d, ø [mm] Rg [“] D [cm] H [cm] Material EPDM Art. no. DN d, ø [mm] di, ø [mm] D [cm] H [cm] 361.742.00.1 50 50 45 9.2 0.3 379.781.16.1 32 44 x 1/8 5.6 2.6 360.781.16.1 40 52 x 1/6 6.4 3.3 361.781.16.1 50 62 x 1/6 7.4 3.3 363.781.16.1 56 70 x 1/6 8.5 3.5 363.742.00.1 56 - 60 56 - 63 59 10.7 0.3 364.781.16.1 63 75 x 1/6 9 4.2 365.742.00.1 70 75 69 12.7 0.3 365.
781.16.1 75 95 x 1/6 11.2 4.5 366.742.00.1 90 90 83 14.2 0.3 366.781.16.1 90 110 x 1/4 12.9 5 367.742.00.1 100 110 102 16.2 0.3 367.781.16.1 110 130 x 1/4 14.9 6.5 368.742.00.1 125 125 116 19.2 0.3 369.742.00.1 150 160 149 21.7 0.3 370.742.00.1 Application purposes • For repairing holes in pipes and fittings ø 40–160 mm in Geberit HDPE and Geberit Silent-db20 systems • For building drainage • For repairing holes in concealed cisterns made of PE-HD • For Geberit repair tool Art. no. 853.650.16.1 46 d, ø [mm] 40 - 160 200 191 27.2 0.3 250 250 238 32.7 0.4 372.742.00.1 Geberit repair patch 200 371.742.00.1 300 315 298 37.7 0.4 Geberit HDPE Protection covers Accessories 1.5.7 Protection covers 1.5.8 Consumables Geberit protective cap Geberit lubricant, 250 ml h H d Application purposes • For lubricating the seals of push-fit connections • For building drainage Application purposes • For bui
lding drainage • For Geberit coupling sockets Art. no. Technical data 953.761.00.1 Material PE-LD Art. no. Colour / Surface DN d, ø [mm] H [cm] h [cm] 366.820.92.1 yellow 90 90 8.3 3.3 Geberit protective cap Geberit grease pencil Application purposes • For building drainage h H Characteristics • Wax paint marker with paper jacket d Art. no. 958.782.00.1 Application purposes • For building drainage • For Geberit coupling sockets • For coupling sockets for floor-standing WCs Technical data Material PE-LD Art. no. Colour / Surface 367.819.92.1 yellow DN d, ø [mm] H [cm] h [cm] 100 110 7.5 2.5 47 Geberit Conventional Roof Drainage Systems 2. Geberit Conventional Roof Drainage Systems 2.1 Roof outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 2.2 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 51 49 Geberit Conventional Roof Drainage Systems Roof outlets 2.1 Roof outlets Geberit roof outlet with contact sheet Geberit roof outlet with contact sheet 40 40 20 20 7 7 30 30 d d Application purposes • For conventional roof drainage systems • For connecting bituminous roof sealings Application purposes • For conventional roof drainage systems • For connecting bituminous roof sealings Characteristics • Outlet vertical • Straight connector made of CrNi steel 1.4301, can be shortened Characteristics • Outlet vertical • Straight connector made of CrNi steel 1.4301, can be shortened Technical data Technical data Maximum head of water 35 mm Scope of delivery • Outlet grating made of PP • 1 base unit with contact sheet made of CrNi steel 1.4301 • 1 protection box cover Art. no. DN d, ø [mm] 359.038.00.1 90 90 Accessories • Geberit supplementary set, suitable for promenade decks → p
. 51 50 Maximum head of water 35 mm Scope of delivery • Outlet grating made of PP • 1 base unit with contact sheet made of CrNi steel 1.4301 • 1 protection box cover Art. no. 359.037.00.1 DN d, ø [mm] 100 110 Accessories • Geberit supplementary set, suitable for promenade decks → p. 51 Geberit Conventional Roof Drainage Systems Accessories Geberit roof outlet with fastening flange, for roof foils 2.2 Accessories 30 D N ew h Geberit roof connection set, vertical, with anticondensation insulation and conical inlet funnel H d1 K d Characteristics • Outlet vertical • Straight connector made of PE-HD, can be shortened • Maintenance-free clamping flange joint Maximum discharge rate 7 l/s Maximum head of water 35 mm Scope of delivery • Outlet grating • 1 base unit • Flange gasket made of EPDM • Fastening flange with prevailing torque nuts 359.013.00.1 K1 d Application purposes • For conventional Geberit roof outlets Ch
aracteristics • Straight connector made of PE-S2, can be shortened Scope of delivery • Insert for water during construction • Fastening material • Anti-condensation insulation Technical data Art. no. AD H Application purposes • For conventional roof drainage systems • For collecting and draining off rainwater from roofs • For roof foils without fleece lamination • For connecting to roof foils with thicknesses ≤ 4 mm Art. no. d, ø [mm] d1, ø [mm] AD [cm] H [cm] K1 [cm] 308.969.00.1 DN d, ø [mm] D [cm] H [cm] h [cm] K [cm] 100 110 16 26.5 8 14 90 90 28.5 26.5 11 310.969.00.1 110 110 28.5 26.5 11 Geberit supplementary set, suitable for promenade decks 25 212 20 43 Application purposes • For conventional roof drainage systems • For Geberit roof outlets with bitumen sheeting • For collecting and draining off rainwater from roofs Characteristics • Can bear loads of up to 150 kg Scope of delivery • Grating m
ade of CrNi steel 1.4301 • 1 grating frame made of CrNi steel 1.4301 Art. no. 359.039.00.1 51 Geberit Pluvia Roof Drainage Systems 3. Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 3.1 Roof outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 3.1.1 3.1.2 Roof outlets up to 25 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Roof outlets up to 100 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 3.2 Roof outlets for gutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 3.2.1 3.2.2 Roof outlets up to 25 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Roof
outlets up to 100 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 3.3 Vapour barrier elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 3.3.1 3.3.2 For roof outlets up to 14 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 For roof outlets up to 25 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 3.4 Emergency overflows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 3.4.1 3.4.2 For roof outlets up to 14 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 For roof outlets up to 25 l/s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 3.5 Fastenings . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 3.5.1 Fastening systems d 40–200 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 3.5.2 Fastening systems d 250–315 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 3.6 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 3.6.1 3.6.2 For roof outlets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 For fastenings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 53 Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets Flanged Flat roof With contact sheet / contact seam Gutter Flat roof Gutter + 6l 359.031.00.1 359.565.00.1 359.560.00.1 14 l 359.003.00.1 359
.066.00.1 359.032.00.1 359.571.00.1 359.636.00.1 359.637.00.1 359.638.00.1 19 l 359.034.00.1 25 l 359.012.00.1 359.573.00.1 359.544.00.1 359.34x.00.1 359.34x.00.1 45 l * 60 l * 100 l * * outlets for emergency overflow only 54 Geberit Pluvia Roof Drainage Systems Roof outlets up to 25 l/s Roof outlets 3.1 Roof outlets 3.1.1 Roof outlets up to 25 l/s Geberit Pluvia roof outlet with fastening flange, for roof foils 30 Geberit Pluvia roof outlet with fastening flange, for roof foils, outlet grating made of aluminium cast 29 29 95 7 75 7 10-365 0-265 d 295 10–365 0–265 Application purposes • For collecting and draining off rainwater from roofs • For roof foils without fleece lamination • For syphonic roof drainage systems • For connecting to roof foils with thicknesses ≤ 4 mm Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Maintenance
-free clamping flange joint Technical data Maximum discharge rate at 55 mm head of water 14 l/s Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Flange gasket made of EPDM • Anti-condensation insulation • Fastening flange with prevailing torque nuts • Fastening material Art. no. Sealing of connection DN d, ø [mm] 359.003.00.1 CrNi steel 1.4301 56 56 Accessories • Installation sheet for Geberit Pluvia roof outlet with fastening flange, for roof foils → p. 66 d 295 Application purposes • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For roof foils without fleece lamination • For connecting to roof foils with thicknesses ≤ 4 mm Characteristics • Outlet vertical • Straight connector made of PE-HD, can be shortened • Straight connector can be reduced directly or extended • Outlet grating with integrated function di
sc • Outlet grating attached with screws • Maintenance-free clamping flange joint • Not compatible with emergency overflow set Technical data Maximum discharge rate at 55 mm head of water 14 l/s Scope of delivery • 1 base unit with contact sheet made of CrNi steel 1.4301 • Outlet grating with function disc made of aluminium cast • Fastening flange with prevailing torque nuts • Flange gasket made of EPDM • Fastening material • Anti-condensation insulation Must not be used for bitumen roof foils Sealing of connection DN d, ø [mm] 359.066.00.1 • Art. no. CrNi steel 1.4301 56 56 Accessories • Installation sheet for Geberit Pluvia roof outlet with fastening flange, for roof foils → p. 66 • Must not be used for bitumen roof foils 55 Geberit Pluvia Roof Drainage Systems Roof outlets Roof outlets up to 25 l/s Geberit Pluvia roof outlet with fastening flange, for roof foils 30 29 95 14 d 7 Scope of delivery • Outlet grating w
ith function disc • Outlet disc • 1 base unit • Anti-condensation insulation • 1 protection box cover • Fastening material Art. no. DN d, ø [mm] 359.565.00.1 56 56 21 Application purposes • For collecting and draining off rainwater from roofs • For renovated roofs • For roof foils without fleece lamination • For syphonic roof drainage systems • For connecting to roof foils with thicknesses ≤ 4 mm • For horizontal pipe connections Accessories • Geberit Pluvia contact foil for bitumen → p. 65 • Geberit Pluvia contact sheet Universal → p. 67 Geberit Pluvia roof outlet with contact sheet Characteristics • Outlet, horizontal • Straight connector can be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Maintenance-free clamping flange joint • Low installation height 52 29 95 7 10-25 0-15 d 295 Technical data Maximum discharge rate 6 l/s Maximum head of water 35 mm Scope of deli
very • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Flange gasket made of EPDM • Fastening flange with prevailing torque nuts Art. no. Sealing of connection DN d, ø [mm] 359.031.00.1 CrNi steel 1.4301 56 56 Application purposes • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For connecting bituminous roof sealings Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Base unit with integrated outlet disc Technical data Maximum discharge rate at 55 mm head of water • 14 l/s Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Anti-condensation insulation • 1 protection box cover Must not be used for bitumen roof foils Geberit Pluvia roof outlet Art. no. Sealing of connection
DN d, ø [mm] 359.571.00.1 CrNi steel 1.4301 56 56 359.571.00.2 CrNi steel 1.4301 56 56 29 95 115 d 21 Application purposes • For collecting and draining off rainwater from roofs • For renovated roofs • For syphonic roof drainage systems • For horizontal pipe connections Characteristics • Outlet, horizontal • Straight connector can be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Low installation height Technical data Maximum discharge rate 6 l/s Maximum head of water 35 mm 56 Geberit Pluvia Roof Drainage Systems Roof outlets up to 100 l/s Roof outlets Geberit Pluvia roof outlet with fastening flange, for roof foils 50 32 Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • 1 protection box cover 7 Art. no. d 28 DN d, ø [mm] 359.573.00.1 16 Sealing of connection CrNi steel 1.4301 90 90 85 Application purposes • F
or collecting and draining off rainwater from roofs • For roof foils without fleece lamination • For syphonic roof drainage systems • For connecting to roof foils with thicknesses ≤ 4 mm 3.1.2 Roof outlets up to 100 l/s Geberit Pluvia roof outlet with contact sheet 60 Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 90 mm, made of PE-HD • Maintenance-free clamping flange joint • Outlet grating with integrated function disc • Base unit with integrated outlet disc 25 l/s Maximum head of water 7 85 28 d 28 Application purposes • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For connecting bituminous roof sealings Technical data Discharge rate 32 55 mm Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Flange gasket made of EPDM • Fa
stening flange with prevailing torque nuts • 1 protection box cover Art. no. Sealing of connection DN d, ø [mm] 359.012.00.1 CrNi steel 1.4301 90 90 Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 110 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc Technical data 60 32 7 85 16 45 l/s Maximum head of water Geberit Pluvia roof outlet with contact sheet Discharge rate 80 mm Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Wing nut and prevailing torque nuts, made of CrNi steel 1.4301 • 1 protection box cover Application purposes • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For connecting bituminous roof sealings Art. no. Sealing of connection 359.345.00.1 d 28 CrNi st
eel 1.4301 • DN d, ø [mm] 100 110 For emergency overflow only Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 90 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc Technical data Discharge rate 25 l/s Maximum head of water 55 mm 57 Geberit Pluvia Roof Drainage Systems Roof outlets for gutters Roof outlets up to 25 l/s Geberit Pluvia roof outlet with contact sheet 60 32 7 85 Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Wing nut and prevailing torque nuts, made of CrNi steel 1.4301 • 1 protection box cover d 28 Application purposes • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For connecting bituminous roof sealings Characteristics • Outlet vertical • Straight conne
ctor can be reduced directly or extended • Straight connector permanently mounted, ø 125 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc Technical data Art. no. Sealing of connection 359.347.00.1 225 CrNi steel 1.4301 • DN d, ø [mm] 155 160 For emergency overflow only 3.2 Roof outlets for gutters 3.2.1 Roof outlets up to 25 l/s Geberit Pluvia roof outlet with contact sheet for gutters Discharge rate 60 l/s 32 Maximum head of water 85 mm 29 Scope of delivery • Outlet grating with function disc • 1 base unit with contact sheet made of CrNi steel 1.4301 • Wing nut and prevailing torque nuts, made of CrNi steel 1.4301 Art. no. Sealing of connection DN d, ø [mm] 359.346.00.1 CrNi steel 1.4301 125 125 • For emergency overflow only Geberit Pluvia roof outlet with contact sheet 60 85 16 d 28 Application purposes • For collecting and draining off rainwater from roofs • For
syphonic roof drainage systems • For connecting bituminous roof sealings Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 160 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc 100 l/s Maximum head of water 105 mm 58 d 295 Application purposes • For collecting and draining off rainwater from roofs • For gutters with a minimum width of 35 cm • For connecting metallic product materials • For syphonic roof drainage systems Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Base unit with integrated outlet disc Maximum discharge rate at 55 mm head of water 7 Discharge rate 0-15 Technical data 32 Technical data 95 7 10-25 14 l/s Scope of delivery • Outlet grating with function disc • 1 base
unit with contact sheet • Anti-condensation insulation • 1 protection box cover Art. no. Sealing of connection DN d, ø [mm] 359.636.00.1 CrNi steel 1.4301 56 56 359.637.00.1 Copper 56 56 359.638.00.1 Peraluman 56 56 Geberit Pluvia Roof Drainage Systems Roof outlets up to 25 l/s Roof outlets for gutters Geberit Pluvia roof outlet with flange, for gutters 29 95 Art. no. 10-365 0-265 Scope of delivery • 1 base unit made of CrNi steel 1.4301 • Outlet grating with function disc and blue rotary latching slider • 6 hammer fixings, made of chrome nickel steel 359.034.00.1 d, ø [mm] 75 d 265 Geberit Pluvia roof outlet for gutters Application purposes • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For gutters with a minimum width of 32 cm • For connecting metallic product materials with thicknesses ≤ 4 mm 32 d 28 75 15 Characteristics • Outlet vertical • Straight connector c
an be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Maintenance-free clamping flange joint Technical data Maximum discharge rate at 55 mm head of water 8 14 l/s Scope of delivery • Outlet grating with function disc • 1 base unit made of CrNi steel 1.4301 • Flange gasket made of EPDM • Fastening flange with prevailing torque nuts Art. no. Sealing of connection DN d, ø [mm] 359.032.00.1 CrNi steel 1.4301 56 56 Geberit Pluvia roof outlet for gutters 18 Application purposes • For collecting and draining off rainwater from roofs • For gutters with a minimum width of 35 cm • For connecting metallic product materials • For syphonic roof drainage systems Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 90 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc
Technical data Discharge rate 25 l/s Maximum head of water 55 mm Scope of delivery • Outlet grating with function disc • 1 base unit with contact rim made of CrNi steel 1.4301 • Fastening material Art. no. Sealing of connection DN d, ø [mm] 359.544.00.1 CrNi steel 1.4301 90 90 82 157 d Application purposes • For installation in gutters with a minimum width of 21 cm • For connection to concrete and stainless steel gutters • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems Characteristics • Straight connector made of PE-HD, can be shortened • Straight connector can be reduced directly or extended Technical data Maximum discharge rate 19 l/s Maximum head of water 55 mm 59 Geberit Pluvia Roof Drainage Systems Roof outlets for gutters Roof outlets up to 100 l/s 3.2.2 Roof outlets up to 100 l/s Technical data Discharge rate Geberit Pluvia roof outlet for gutters 60 l/s Maximum head of water 85
mm Scope of delivery • Outlet grating with function disc • 1 base unit with contact rim made of CrNi steel 1.4301 • Wing nut and prevailing torque nuts, made of CrNi steel 1.4301 32 8 75 27 Art. no. Application purposes • For collecting and draining off rainwater from roofs • For gutters with a minimum width of 35 cm • For connecting metallic product materials • For syphonic roof drainage systems Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 110 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc Sealing of connection DN d, ø [mm] 359.343.00.1 d 28 CrNi steel 1.4301 125 125 • For emergency overflow only Geberit Pluvia roof outlet for gutters 32 8 75 d 28 Technical data Discharge rate 45 l/s Maximum head of water 80 mm Scope of delivery • Outlet grating with function disc • 1
base unit with contact rim made of CrNi steel 1.4301 • Wing nut and prevailing torque nuts, made of CrNi steel 1.4301 Art. no. Sealing of connection 359.342.00.1 CrNi steel 1.4301 • 15 DN d, ø [mm] 100 110 Application purposes • For collecting and draining off rainwater from roofs • For gutters with a minimum width of 35 cm • For connecting metallic product materials • For syphonic roof drainage systems Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 160 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc Technical data For emergency overflow only Discharge rate Geberit Pluvia roof outlet for gutters 32 8 75 105 mm Scope of delivery • Outlet grating with function disc • 1 base unit with contact rim made of CrNi steel 1.4301 • Wing nut and prevailing torque nuts, made of CrNi steel 1.430
1 • 1 protection box cover 215 d 28 Application purposes • For collecting and draining off rainwater from roofs • For gutters with a minimum width of 35 cm • For connecting metallic product materials • For syphonic roof drainage systems Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 125 mm, made of PE-HD • Outlet grating with integrated function disc • Base unit with integrated outlet disc 60 100 l/s Maximum head of water Art. no. Sealing of connection 359.344.00.1 CrNi steel 1.4301 • For emergency overflow only DN d, ø [mm] 155 160 Geberit Pluvia Roof Drainage Systems For roof outlets up to 14 l/s Vapour barrier elements 3.3 Vapour barrier elements 3.3.1 For roof outlets up to 14 l/s Geberit Pluvia vapour barrier connection for loose flange and contact sheet 7 0-13 10-23 Scope of delivery • 1 protection box cover Art. no. DN d, ø
[mm] 359.027.00.1 90 90 3.4 Emergency overflows 3.4.1 For roof outlets up to 14 l/s d 295 Application purposes • For connecting vapour barriers • For syphonic roof drainage systems • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s Geberit Pluvia emergency overflow for base unit, made of plastic 26 Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector made of PE-HD, can be shortened • Clamping ring with extraction lock for up to 120 kg 85 25–55 Technical data 11 Maximum discharge rate 12-14 l/s Application purposes • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • Not suitable for Geberit Pluvia roof outlets with outlet grating made of aluminium cast, 12–14 l/s Scope of delivery • Outlet disc • 1 base unit • Fastening disc • Anti-condensation insulation • 1 protection box cover • Fastening material Art. no. DN 56 Techn
ical data Maximum head of water at 14 l/s 56 80 mm Overflow height d, ø [mm] 359.552.00.1 Characteristics • Overflow section can be shortened 55 mm Scope of delivery • Overflow section made of PP • 2 mounting clips • Function disc • Lip seal made of EPDM Accessories • Geberit Pluvia contact sheet Universal → p. 67 3.3.2 For roof outlets up to 25 l/s Geberit Pluvia vapour barrier connection Art. no. 359.064.00.1 60 105 ø9 Application purposes • For Geberit Pluvia roof outlets with discharge rate of 25 l/s • For collecting and draining off rainwater from roofs • For syphonic roof drainage systems • For connecting vapour barriers made of plastic or bitumen • For insulated roofs with vapour barrier Characteristics • Outlet vertical • Straight connector can be reduced directly or extended • Straight connector permanently mounted, ø 90 mm, made of PE-HD • Zinc-plated Technical data Maximum discharge rate 25 l/s 61 Geber
it Pluvia Roof Drainage Systems Fastenings For roof outlets up to 25 l/s Geberit Pluvia emergency overflow for base unit, metal Geberit Pluvia emergency overflow 315 26 55 85 25–55 11 Application purposes • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • Not suitable for Geberit Pluvia roof outlets with outlet grating made of aluminium cast, 12–14 l/s Characteristics • Overflow section can be shortened 27 Application purposes • For Geberit Pluvia roof outlets with discharge rate of 25 l/s Characteristics • With round cord ring made of EPDM Technical data Maximum head of water at 25 l/s 100 mm Overflow height 55 mm Scope of delivery • Fastening material Technical data Maximum head of water at 14 l/s 80 mm Overflow height 55 mm Scope of delivery • Overflow section made of PP • 2 mounting clips • Function disc • Lip seal made of EPDM Art. no. 358.008.00.1 3.5 Fastenings 3.5.1 Fastening system d40–200 Ar
t. no. Geberit Pluvia support rail 359.065.00.1 L 3 d 3.4.2 For roof outlets up to 25 l/s Geberit Pluvia emergency overflow 9 55 3 Application purposes • For Geberit Pluvia pipe brackets • For fastening pipes to ceilings Characteristics • Zinc-plated Technical data Application purposes • For Geberit Pluvia roof outlets with discharge rate of 19 l/s Maximum head of water at 19 l/s 70 mm Overflow height 55 mm Art. no. 359.036.00.1 62 Steel Art. no. Technical data Scope of delivery • 2 rotary latching sliders, grey • Lip seal made of EPDM Material Colour / Surface 362.863.26.1 galvanized L [m] 5 Geberit Pluvia Roof Drainage Systems Fastening system d40–200 Fastenings Geberit Pluvia support rail connection element M10 2 Geberit Pluvia pipe bracket, adjustable M10 L1/L2 47 20 Application purposes • For connecting Geberit support rails with square profile • For fastening pipes to ceilings Characteristics • With long thread coup
ling welded on • Zinc-plated Technical data Material Steel Art. no. Colour / Surface 362.864.26.1 d1 d2 3 galvanized Application purposes • For anchor-point fastening of pipes in combination with electrofusion tapes • For anchor-point fastening of pipes in combination with electrofusion couplings • For sliding bracket fastening of pipes • For fastening with tension wedges • For fastening to Geberit Pluvia support rails with square profile Characteristics • Zinc-plated Technical data Geberit Pluvia support rail suspension element M10 M10 Material Steel Art. no. 3 50 363.861.00.1 56 364.861.00.1 3 d1, ø [mm] 361.861.00.1 47 DN 365.861.00.1 2 d2, ø [mm] L1 [cm] L2 [cm] 50 58 10.9 11.3 56 64 11.2 11.6 60 63 71 11.8 12.2 70 75 83 12.4 12.8 366.861.00.1 Application purposes • For fastening Geberit Pluvia support rails with square profile • For fastening pipes to ceilings Characteristics • With long thread cou
pling welded on • Zinc-plated 90 90 98 13.3 13.7 367.861.00.1 100 110 118 14.4 14.8 368.861.00.1 125 125 133 15.1 15.5 369.861.00.1 150 160 168 17 17.4 Geberit Pluvia pipe bracket, adjustable, with securing clamp Technical data Material Steel Art. no. d1 d2 Colour / Surface 362.862.26.1 L1/L2 galvanized Geberit Pluvia tension wedge L Application purposes • For fastening Geberit Pluvia pipe brackets, Pluvia support rail suspension elements and Pluvia connection elements to Pluvia support rails with square profile Application purposes • For anchor-point fastening of pipes in combination with electrofusion tapes • For anchor-point fastening of pipes in combination with electrofusion couplings • For sliding bracket fastening of pipes • For fastening with tension wedges • For fastening to Geberit Pluvia support rails with square profile Characteristics • Zinc-plated Technical data Characteristics • Zinc-plated Material
Scope of delivery • Securing clamp Technical data Material Steel Art. no. Colour / Surface 362.865.26.1 galvanized Steel L [cm] 9 Art. no. Colour / Surface 370.861.26.1 galvanized DN d, ø [mm] d1, ø [mm] d2, ø [mm] L1 [cm] L2 [cm] 200 200 200 208 19 19.4 63 Geberit Pluvia Roof Drainage Systems Fastenings Fastening system d250–315 Geberit electrofusion tape for anchor point Geberit Pluvia support rail connection element D B d1 d H L H h d Application purposes • For building drainage Application purposes • For connecting Geberit support rails with C-profile Characteristics • One-piece • Can be welded with Geberit electrofusion machines Characteristics • Zinc-plated Technical data Technical data Material Material PE-HD Art. no. DN d, ø [mm] d1, ø [mm] D [cm] H [cm] 361.776.16.1 50 50 58 6.6 6 Art. no. h [cm] 3 363.776.16.1 56 56 64 7.2 6 60 63 71 7.9 6 3 365.776.16.1 70 75 83 9.1 6
3 B [cm] H [cm] L [cm] 4.5 4 16 3 364.776.16.1 363.864.00.1 Steel 3 366.776.16.1 90 90 98 10.6 6 367.776.16.1 100 110 118 12.6 6 3 368.776.16.1 125 125 133 14.1 6 3 369.776.16.1 150 160 168 17.6 6 3 370.776.16.1 200 200 208 21.6 6 Geberit Pluvia support rail suspension element 3 3.5.2 Fastening system d250–315 Application purposes • For fastening pipes to ceilings and walls • For fastening Geberit support rails with C-profile and Geberit threaded rods M10 Geberit Pluvia support rail Characteristics • Zinc-plated B H L L Technical data Material Application purposes • For fastening pipe brackets with threaded fastening • For fastening pipes to ceilings 363.862.00.1 Technical data Material 363.863.00.1 Scope of delivery • 2 nuts M10 • Washer Art. no. Characteristics • C-profile • Zinc-plated Art. no. Steel Steel B [cm] H [cm] L [m] 4 6 Geberit Pluvia pipe bracket with electrofusion tap
e for anchor point M 5 l L d B Application purposes • For fastening to Geberit Pluvia support rails with C-profile • For fastening with threaded rods • For anchor-point fastening of pipes 64 Geberit Pluvia Roof Drainage Systems For roof outlets Accessories Characteristics • Female thread • Zinc-plated Technical data Material Scope of delivery • Fastening material Technical data Material Steel Art. no. 371.861.00.1 d, ø [mm] M [mm] B [cm] L [cm] l [cm] 250 250 16 3 14.8 6 d, ø [mm] 371.862.00.1 DN DN 250 250 372.862.00.1 Scope of delivery • 2 electrofusion tapes • Fastening material Art. no. Steel 300 315 M [mm] B [cm] L [cm] l [cm] 16 3 14.8 6 16 3 18 6 3.6 Accessories 3.6.1 For roof outlets Geberit Pluvia pipe bracket set with electrofusion tape for anchor point Geberit Pluvia contact foil for bitumen M 50 l L d Application purposes • For connecting bituminous roof sealings B Application purpose
s • For fastening to Geberit Pluvia support rails with C-profile • For fastening with threaded rods • For anchor-point fastening of pipes Scope of delivery • 1 protection box cover, heat-resistant • Condensation insulation ring Sealing of connection 359.578.00.1 Characteristics • Female thread • Zinc-plated Art. no. Bitumen (Sopralen EP-3) Technical data Material Steel Scope of delivery • Set of 2 pieces Art. no. 372.861.00.1 DN d, ø [mm] M [mm] B [cm] L [cm] l [cm] 300 315 16 3 18 6 Geberit Pluvia pipe bracket with socket M16 M l L d B Application purposes • For sliding bracket fastening of pipes • For fastening to Geberit Pluvia support rails with C-profile • For fastening with threaded rods Characteristics • Female thread • Zinc-plated 65 Geberit Pluvia Roof Drainage Systems Accessories Geberit Pluvia connection pipe, can be bent For roof outlets Geberit Pluvia installation sheet for roof outlets L 60 s d
36 D 265 Application purposes • For flexible connection of Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • For connecting Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • For direct connection to Geberit Pluvia roof outlets • For use with temperature differentials of between -10 and +50 °C Characteristics • Can be welded on both sides with electrofusion coupling • Cannot be shortened • Cannot be cleaned with cleaning rod Art. no. DN d, ø [mm] D [cm] L [m] 360.822.00.1 40 40 4.2 50 50 5.4 56 56 6.1 60 63 7 70 75 8.2 Art. no. 359.558.00.1 Steel s [mm] 1.5 1.1 365.822.00.1 Material 1.1 364.822.00.1 Technical data 1.1 363.822.00.1 Characteristics • Hot-dip galvanized Geberit Pluvia installation sheet for fastening on thermal insulation 1.1 361.822.00.1 Application purposes • For Geberit Pluvia roof outlets made of
plastic, with discharge rate of 12–14 l/s • For fastening Geberit Pluvia base units on lightweight roofs • For Geberit Pluvia vapour barrier connection for loose flange and contact sheet 1.1 40 Application purposes • For stabilising Geberit Pluvia base units on thermal insulation Characteristics • Hot-dip galvanized Geberit Pluvia fastening belt B Technical data Material L Art. no. 359.630.00.1 Application purposes • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • For fastening Geberit Pluvia connection pipes with horizontal mounting close to the ceiling Steel s [mm] 1.5 Installation sheet for Geberit Pluvia roof outlet with fastening flange, for roof foils 60 Characteristics • Can be shortened • With snap fastener for loop Art. no. 358.004.00.1 B [cm] L [cm] 5 100 265 30 Accessories • Geberit Pluvia fastening belt → p. 66 s 265 30 Application purposes • For Geberit Pluvia roof outlets with fastening
flange for roof foils with discharge rate of 12–14 l/s • For fastening on lightweight roofs Characteristics • Hot-dip galvanized Technical data Material 66 36 s Steel Geberit Pluvia Roof Drainage Systems For roof outlets Accessories Scope of delivery • 4 fastening screws Characteristics • Self-regulating heating • CE-compliant Art. no. Colour / Surface s [mm] 359.006.25.1 hot-dip galvanized Technical data 1.5 Nominal voltage 230 V AC Power consumption at 4 °C 8W Geberit Pluvia contact sheet Universal 52 s Art. no. 359.971.00.1 d, ø [mm] D [cm] H [cm] 56 9.7 6 Geberit heating strip 230 V / 11.2 W Application purposes • For connecting bituminous roof sealings Scope of delivery • 1 protection box cover, heat-resistant • Condensation insulation ring Art. no. Sealing of connection 359.560.00.1 Characteristics • Self-regulating heating • CE-compliant s [mm] CrNi steel 1.4404 Technical data 1 Nominal voltage 230
V AC Power consumption at 4 °C 11.2 W Scope of delivery • Cable tie • Aluminium adhesive tape, 1.0 m Geberit Pluvia outlet fastening 6 Art. no. 4 359.042.00.1 4 - 75 Geberit Pluvia supplementary set, suitable for parking decks 14 325 Application purposes • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s 315 Technical data Material 2 6-30 Steel 35 Art. no. 358.829.00.1 Geberit Pluvia heating element 230 V / 8 W D Application purposes • For green roofs • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • For later construction of roofs in the case of inverted roofs, weight-bearing or green roofs Characteristics • Can bear loads of up to 1500 kg H d Scope of delivery • Grating • 1 grating frame • Force distribution plate • Duct pipe can be cut to length • Fastening material Art. no. Application purposes • For non-ventilated flat-roof structures with insulation thicknesses ≥ 14 cm 3
59.635.00.1 67 Geberit Pluvia Roof Drainage Systems Accessories Geberit Pluvia supplementary set, suitable for promenade decks For fastenings 3.6.2 For fastenings Geberit Pluvia support set 32 315 M 6-28 L 35 M Application purposes • For green roofs • For Geberit Pluvia roof outlets with discharge rate of 12–14 l/s • For later construction of roofs in the case of inverted roofs, weight-bearing or green roofs Characteristics • Can bear loads of up to 150 kg Scope of delivery • Punched plate grating • Duct pipe can be cut to length • Force distribution plate • Fastening material M d Application purposes • For later installation • For additional support of Geberit Pluvia fastening systems in unfavourable conditions • For fastening to Geberit Pluvia support rails with square profile • For pipes ø 75 mm suspended more than 1 m • For pipes ø 90–160 mm suspended more than 60 cm • For horizontal pipe fixations Characteristics
• Articulated joint rotatable by 180° • Zinc-plated Art. no. 359.504.00.1 Technical data Material Geberit Pluvia gravel ring 285 52 Scope of delivery • Pipe bracket with welded-on long nuts M10 • 6 articulated joints M10 • Fastening material Art. no. Application purposes • For holding back roof gravel with a grain size of 8–16 mm • For combining with Geberit Pluvia outlet gratings 12–14 l/s • Not suitable for Geberit Pluvia roof outlets with outlet grating made of aluminium cast, 12–14 l/s Technical data Material Stainless steel Art. no. 359.567.00.1 Geberit Pluvia thermal insulation 52 295 75-175 d Application purposes • For inverted roofs for thermal insulation Technical data Thermal conductivity insulation Art. no. 358.831.00.1 68 d, ø [mm] 56 0.032 W/(m*K) Steel DN d, ø [mm] M [mm] L [cm] 365.710.00.1 70 75 10 12.4 366.710.00.1 90 90 10 13.3 367.710.00.1 100 110 10 14.4 368.710.00.1 125 125 10 15.1 369
.710.00.1 150 160 10 17 Geberit Pluvia Roof Drainage Systems For fastenings Accessories Geberit Pluvia support set Geberit Pluvia support set M M l L M M L M M d d Application purposes • For pipes suspended more than 60 cm • For later installation • For additional support of Geberit Pluvia fastening systems in unfavourable conditions • For fastening to Geberit Pluvia support rails with square profile • For horizontal pipe fixations Application purposes • For pipes suspended more than 60 cm • For fastening to Geberit Pluvia support rails with C-profile • For later installation • For additional support of Geberit Pluvia fastening systems in unfavourable conditions • For horizontal pipe fixations Characteristics • Articulated joint rotatable by 180° • With locking bracket • Zinc-plated Characteristics • Articulated joint rotatable by 180° • Zinc-plated Technical data Technical data Material Material Steel Scope
of delivery • Pipe bracket with welded-on long nuts M10 • 6 articulated joints M10 • Securing clamp Scope of delivery • Pipe bracket • 6 articulated joints M10 • Fastening material Art. no. Art. no. 370.710.00.1 DN d, ø [mm] M [mm] L [cm] 200 200 10 19 Steel DN d, ø [mm] M [mm] L [cm] l [cm] 371.710.00.1 250 250 10 14.8 10.5 372.710.00.1 300 315 10 18 10.5 69 Geberit Silent-db20 4. Geberit Silent-db20 4.1 Pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 4.2 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 4.2.1 4.2.2 4.2.3 4.2.4 Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Branch fittings. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 Reducers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 Access pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 4.3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 4.3.1 4.3.2 4.3.3 Welding joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Push-in connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Clamping connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 4.3.4 Adapters to other product materials . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .84 4.4 Waste fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 4.4.1 Connection bends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 4.5 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 4.5.1 4.5.2 4.5.3 4.5.4 4.5.5 4.5.6 Air admittance valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Pipe brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Fastenings for pipe brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 Sealings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 71 Geberit Silent-db20 Pipes Bends 4.1 Pipes 4.2 Fittings 4.2.1 Bends Geberit Silent-db20 pipe L d di s Geberit Silent-db20 bend 15° d X1 A2 X Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant K d Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Long leg • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*
K) Material PE-S2 Technical data Art. no. DN d, ø [mm] di, ø [mm] s [mm] L [m] Acm² [cm²] Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 305.000.14.1 56 56 49.6 3.2 3 19.3 306.000.14.1 60 63 56.6 3.2 3 25.1 307.000.14.1 70 75 67.8 3.6 3 36.1 308.000.14.1 90 90 79 5.5 3 49 310.000.14.1 100 110 98 6 3 75.4 305.150.14.1 312.000.14.1 125 135 123 6 3 118.7 306.150.14.1 315.001.14.1 150 160 146 7 3 167.4 307.150.14.1 70 75 308.150.14.1 90 90 310.150.14.1 100 110 10 6 5.5 312.150.14.1 125 135 11.5 6.5 6.5 315.150.14.1 150 160 13 7.5 8 72 Art. no. DN d, ø [mm] X [cm] X1 [cm] K [cm] 56 56 7.5 4.5 3.5 60 63 7.5 5 3.5 8 5 3.5 10 5.5 5.5 Geberit Silent-db20 Bends Fittings Geberit Silent-db20 bend 30° Art. no. DN d, ø [mm] X [cm] X1 [cm] K [cm] 308.450.14.1 90 90 10 5.5 4 310.450.14.1 X1 100 110 10 6 4 312.450.14.1 X
K 125 135 11.5 7.7 5 315.450.14.1 150 160 15.5 9.5 8 d Application purposes • For building drainage • For buildings with increased sound insulation requirements Geberit Silent-db20 bend 60° with large leg X Characteristics • Long leg • Abrasion resistant • Sound-absorbing • UV-resistant K X K d Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] X [cm] X1 [cm] K [cm] 305.300.14.1 56 56 7.5 4.5 3.5 306.300.14.1 60 63 7.5 5 3 Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Long leg • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant 307.300.14.1 70 75 8 5 3.5 308.300.14.1 90 90 10 6.5 4.5 310.300.14.1 100 110 10 6 4.5 Thermal expansion 0.17 mm/(m*K) 312.300.14.1 125 135 11.5 6.5 6 Thermal conductivity pipe 0.43
W/(m*K) 315.300.14.1 150 160 15.7 15.7 7 Material PE-S2 Technical data Art. no. Geberit Silent-db20 bend 45° DN d, ø [mm] X [cm] K [cm] 305.600.14.1 X1 56 56 9.1 3.5 306.600.14.1 60 63 9.7 3 75 11.3 3.5 90 90 13.8 4.5 310.600.14.1 100 110 14.6 4.5 312.600.14.1 K 70 308.600.14.1 X 307.600.14.1 125 135 16.9 6 d Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Long leg • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] X [cm] X1 [cm] K [cm] 305.450.14.1 56 56 7.5 4.5 3 306.450.14.1 60 63 7.5 5 2.5 307.450.14.1 70 75 8 5 2.5 73 Geberit Silent-db20 Fittings Bends Geberit Silent-db20 bend 67° Geberit Silent-db20 bend 88.5° with large leg X X1 X K K X d K Application purposes •
For building drainage • For buildings with increased sound insulation requirements Characteristics • Long leg • Abrasion resistant • Sound-absorbing • UV-resistant d Application purposes • For building drainage • For buildings with increased sound insulation requirements Thermal expansion 0.17 mm/(m*K) Characteristics • Long leg • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Thermal conductivity pipe 0.43 W/(m*K) Technical data Material PE-S2 Technical data Thermal expansion Art. no. DN d, ø [mm] X [cm] X1 [cm] K [cm] 305.670.14.1 56 56 7.5 5.5 2 307.670.14.1 70 75 8 6 2 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] X [cm] K [cm] 11 3 308.670.14.1 90 90 10 7 3 305.885.14.1 56 56 310.670.14.1 100 110 10 8 2.5 306.885.14.1 60 63 11.5 2.5 307.885.14.1 70 75 12.8 2.5 Geberit Silent-db20 bend 88.5° 308.885.14.1
90 90 15.6 4 310.885.14.1 100 110 16.9 4 312.885.14.1 X d Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] X [cm] 305.880.14.1 56 56 6.5 306.880.14.1 60 63 7 7.5 307.880.14.1 70 75 308.880.14.1 90 90 8 310.880.14.1 100 110 9.5 312.880.14.1 125 135 11.5 74 125 135 18.6 5 315.885.14.1 X 150 160 22.5 8 Geberit Silent-db20 Branch fittings Fittings 4.2.2 Branch fittings Geberit Silent-db20 branch fitting 45° Geberit Silent-db20 branch fitting 45° d1 d1 X3 X3 H X1 H X2 X1 K1 X2 K1 d d Application purposes • For building drainage • For buildings with increased sound insulation requirements Application purposes • For building drainage • For bu
ildings with increased sound insulation requirements Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Characteristics • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Technical data DN d, ø [mm] d1, ø [mm] H X1 [cm] [cm] X2 [cm] X3 [cm] K1 [cm] 305.054.14.1 56 / 56 56 56 18 6 12 12 1.5 306.054.14.1 60 / 56 63 56 19.5 6.5 13 13 2 306.064.14.1 60 / 60 63 63 19.5 6.5 13 13 2 307.054.14.1 70 / 56 75 56 21 7 14 14 3.5 307.064.14.1 70 / 60 75 63 21 7 14 14 3 307.074.14.1 70 / 70 75 75 21 7 14 14 90 / 56 90 56 24 8 16 16 90 / 60 90 63 24 8 16 16 90 / 70 90 75 24 8 16 16 90 / 90 90 90 24 8 16 16 100 / 56 110 56 27 9 18 18 100 / 60 110 63 27 9 18 18 d, ø [mm] d1, ø [mm] H X1 [cm] [cm] X2 [cm] X3 [cm] K1 [cm] 7
310.064.14.1 DN 2.5 310.054.14.1 Art. no. 4 308.084.14.1 PE-S2 5 308.074.14.1 Material 5 308.064.14.1 0.43 W/(m*K) 2 308.054.14.1 0.17 mm/(m*K) Thermal conductivity pipe Art. no. Thermal expansion 6.5 310.074.14.1 100 / 70 110 75 27 9 18 18 100 / 90 110 90 27 9 18 18 100 / 100 110 110 27 9 18 18 125 / 100 135 110 34.5 11.5 23 23 23 23 27.5 27.5 14 27.6 27.5 7 41.5 14 28.5 27.5 7 5 14 41.5 135 6.5 11.5 110 160 3 312.104.14.1 160 150 / 125 4.5 310.104.14.1 150 / 100 5.5 310.084.14.1 315.104.14.1 315.124.14.1 7 312.124.14.1 125 / 125 135 135 34.5 315.144.14.1 150 / 150 160 160 41.5 75 Geberit Silent-db20 Fittings Branch fittings Geberit Silent-db20 branch fitting 88.5° X2 K3 X3 d1 H X1 K1 d Application purposes • For building drainage • For buildings with increased sound insulation requirements Technical data Thermal expansion Art. no. PE-S2 DN N d1, ø [mm] H [cm] X1 [cm] X
2 [cm] X3 [cm] K1 [cm] K3 [cm] 110 90 22.5 13.5 11.5 9 4 1 100 / 100 310.108.14.1 d, ø [mm] 100 / 90 310.088.14.1 312.109.14.1 0.43 W/(m*K) Material Characteristics • Swept entry • Abrasion resistant • Sound-absorbing • UV-resistant 0.17 mm/(m*K) Thermal conductivity pipe 110 110 22.5 13.5 11.5 9 2.5 0 125 / 100 135 110 22.6 13.5 11.5 9.1 2.5 0 Geberit Silent-db20 branch fitting 88.5° X2 K3 X3 d1 H X1 K1 d Application purposes • For building drainage • For buildings with increased sound insulation requirements Technical data Thermal expansion Art. no. DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] 0.43 W/(m*K) Material Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant 0.17 mm/(m*K) Thermal conductivity pipe PE-S2 K3 [cm] 305.058.14.1 56 / 56 56 56 17.5 10.5 7 7 4.5 0.5 306.058.14.1 60 / 56 63 56 17.5 10.5 7 7 4.5 0.5 306.068.14.1 60 /
60 63 63 17.5 10.5 7 7 4 307.058.14.1 70 / 56 75 56 18 10.5 7 7.5 4.5 307.068.14.1 70 / 60 75 63 18 10.5 7.5 7.5 4 0.5 307.078.14.1 70 / 70 75 75 18 10.5 7.5 7.5 3.5 0 308.058.14.1 90 / 56 90 56 20.3 12 8 8.3 6 2 308.068.14.1 90 / 60 90 63 20.3 12 8 8.3 5.5 1.5 308.078.14.1 90 / 70 90 75 20.3 12 8 8.3 5 1 308.088.14.1 90 / 90 90 90 20.3 12 8.3 8.3 4.5 0.5 310.058.14.1 100 / 56 110 56 22.5 13.5 9 9 7.5 3 2.5 310.068.14.1 100 / 60 110 63 22.5 13.5 9 9 7 310.078.14.1 100 / 70 110 75 22.5 13.5 9 9 6.5 2 312.108.14.1 125 / 100 135 110 28.8 17.3 11.5 11.5 8.5 2.5 312.128.14.1 125 / 125 135 135 28.8 17.3 11.5 11.5 7.5 1.5 315.148.14.1 150 / 150 160 160 33.5 18.5 15 15 7 3 76 Geberit Silent-db20 Branch fittings Fittings Geberit Silent-db20 branch fitting 88.5° X2 K3 X3 d1 H X1 K1 d Application purposes • For building drainage • For buildings
with increased sound insulation requirements Technical data Thermal expansion Art. no. DN d, ø [mm] d1, ø [mm] H [cm] 315.108.14.1 150 / 100 315.128.14.1 150 / 125 160 110 33.5 160 135 X1 [cm] 33.5 0.43 W/(m*K) Material Characteristics • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant 0.17 mm/(m*K) Thermal conductivity pipe PE-S2 X2 [cm] X3 [cm] K1 [cm] K3 [cm] 21 15 12.5 7 1.5 19.5 16 14 7 1.5 Geberit Silent-db20 double branch fitting 88.5°, swept-entry X2 X2 d1 d d1 X3 d1 H d1 X1 K1 180 d Application purposes • For building drainage • For buildings with increased sound insulation requirements • For vertical installation Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Characteristics • Swept entry • Abrasion resistant • Sound-absorbing • UV-resistant Art. no. 310.102.14.1 DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm]
X2 [cm] X3 [cm] K1 [cm] 100 110 110 22.5 13.5 11.5 9 2.5 77 Geberit Silent-db20 Fittings Branch fittings Geberit Silent-db20 corner branch fitting 88.5° X2 d1 d X3 d1 H 90 d1 X1 K1 d Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. 310.103.14.1 DN d, ø [mm] d1, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] K1 [cm] 100 110 110 22.5 13.5 10 9 4.5 Geberit Silent-db20 combined branch fitting 88.5°, swept-entry K3 X5 X3 d1 X2 H d2 X1 K1 d X4 Application purposes • For building drainage • For buildings with increased sound insulation requirements • For connecting low-lying drains on shower elements Characteristics • Swept entry • Fitting welded • Abrasion resistant • Sound-abs
orbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] d1, ø [mm] d2, ø [mm] H [cm] X1 [cm] X2 [cm] X3 [cm] X4 [cm] X5 [cm] K1 [cm] K3 [cm] 0.5 308.811.14.1 90 / 90 / 56 90 90 56 31.6 12 11.3 8.3 8 10.5 6 310.811.14.1 100 / 90 / 56 110 90 56 33.8 13.5 11.3 9 9 11.5 7.5 1 310.813.14.1 100 / 100 / 56 110 110 56 34.8 13.5 12.3 9 9 11.5 7.5 0 78 Geberit Silent-db20 Branch fittings Fittings Geberit Silent-db20 duct branch fitting 88.5°, swept-entry, left X2 X4 d1 H d1 A d2 X1 d2 X3 X5 d X6 Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Swept entry • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Ar
t. no. DN d, ø [mm] d1, ø [mm] d2, ø [mm] A [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] X4 [cm] X5 [cm] X6 [cm] 308.872.14.1 90 / 90 / 70 90 90 75 8.1 20.3 12 8.3 12 8.3 10.6 14.2 310.872.14.1 100 / 90 / 70 110 90 75 7.7 22.5 13.5 9 12.8 9.7 11.5 9.3 310.172.14.1 100 / 100 / 70 110 110 75 7.7 22.5 13.5 9 11.8 10.7 11.5 9.3 Geberit Silent-db20 duct branch fitting 88.5°, swept-entry, right X2 X4 H d1 d1 d2 A d2 X1 X3 X6 d X5 Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Swept entry • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] d1, ø [mm] d2, ø [mm] A [cm] H [cm] X1 [cm] X2 [cm] X3 [cm] X4 [cm] X5 [cm] X6 [cm] 308.871.14.1 90 / 90 / 70 90 90 75 8.1 20.3 12
8.3 12 8.3 10.6 14.2 310.871.14.1 100 / 90 / 70 110 90 75 7.7 22.5 13.5 9 12.8 9.7 11.5 9.3 310.171.14.1 100 / 100 / 70 110 110 75 7.7 22.5 13.5 9 11.8 10.7 11.5 9.3 79 Geberit Silent-db20 Fittings Branch fittings Geberit Silent-db20 parallel branch fitting 45° d1 a d d K1 X3 X1 L Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d1, ø [mm] a [cm] L [cm] X1 [cm] X3 [cm] K1 [cm] 90 / 90 308.081.14.1 d, ø [mm] 90 90 11 24 8 16 2.5 310.081.14.1 100 / 90 110 90 12.5 27 9 18 4.5 310.101.14.1 100 / 100 110 110 12.5 27 9 18 3 Geberit breeches branch fitting 2 x 90° A a a d1 d1 H K d Application purposes • For building drainage •
For buildings with increased sound insulation requirements • For vertical installation Characteristics • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. 308.480.14.1 80 DN d, ø [mm] d1, ø [mm] A [cm] a [cm] H [cm] K [cm] 90 / 90 90 90 30 15 17.5 3 Geberit Silent-db20 Reducers Fittings 4.2.3 Reducers Art. no. Geberit Silent-db20 reducer, eccentric, short d1 h1 DN d, ø [mm] d1, ø [mm] A [cm] H [cm] h [cm] h1 [cm] 310.080.14.1 100 / 90 110 90 1 11 6.1 3.7 312.100.14.1 125 / 100 135 110 1.3 11 6.1 3.7 312.125.14.1 h 135 125 0.4 11 6 3.7 150 / 100 160 110 2.4 12.6 8 3.8 315.126.14.1 H 125 / 125 315.100.14.1 150 / 125 160 135 1.1 13.5 8 4.7 d A Application purposes • For building drainage • For buildings with increased sound insulation requirements • For
reducing the diameter of pipes and fittings outside the expansion range of couplings d1 h1 H h d Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Application purposes • For building drainage • For buildings with increased sound insulation requirements Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. Geberit Silent-db20 reducer, concentric DN d, ø [mm] d1, ø [mm] A [cm] H [cm] h [cm] h1 [cm] 306.050.14.1 60 / 56 63 56 0.4 8 3.4 3.7 307.050.14.1 70 / 56 75 56 0.9 8 3.3 3.7 307.060.14.1 70 / 60 75 63 0.6 8 3.3 3.7 308.050.14.1 90 / 56 90 56 1.5 8 3.1 3.7 308.060.14.1 90 / 60 90 63 1.1 8 3.1 3.7 308.070.14.1 90 / 70 90 75 0.6 8 3.3 3.7 Characteristics • With stopper for ring seal socket • Concentric • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Ther
mal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. 310.052.14.1 H N 310.072.14.1 310.082.14.1 d1 d, ø [mm] d1, ø [mm] H [cm] h [cm] h1 [cm] N 100 / 56 110 56 11 6.1 3.7 100 / 60 310.062.14.1 Geberit Silent-db20 reducer, eccentric h1 DN 110 63 11 6.1 3.7 100 / 70 110 75 11 6.1 3.7 100 / 90 110 90 11 6.1 3.7 h d A Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • With stopper for ring seal socket • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. DN d, ø [mm] d1, ø [mm] A [cm] H [cm] h [cm] h1 [cm] 310.050.14.1 100 / 56 110 56 2.4 11 6 3.7 310.060.14.1 100 / 60 110 63 2.1 11 6.1 3.7 310.070.14.1 100 / 70 110 75 1.5 11 6 3.7 81 Geberit Silent-db20 Fittings Access pipes 4.2.4 Access pipes Ge
berit Silent-db20 access pipe 45° with round service opening Geberit Silent-db20 access pipe 90° with round service opening L L d X3 H X3 X1 H X1 D K1 d K1 d Application purposes • For building drainage • For buildings with increased sound insulation requirements Application purposes • For building drainage • For buildings with increased sound insulation requirements Characteristics • With seal made of EPDM • Abrasion resistant • Sound-absorbing • UV-resistant Characteristics • With seal made of EPDM • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Technical data 0.17 mm/(m*K) Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Material PE-S2 Thermal expansion Scope of delivery • 1 cover made of PP Scope of delivery • 1 cover made of PP Art. no. DN d, ø [mm] D [cm] Art. no. DN d, ø [mm] H [cm] L [cm] X1 [
cm] X3 [cm] K1 [cm] 307.345.14.1 70 75 21 15.5 7 14 2 307.333.14.1 70 75 11.5 3 308.333.14.1 90 90 12.9 310.345.14.1 100 110 27 19 9 18 H [cm] L [cm] X1 [cm] X3 [cm] K1 [cm] 17.5 10 20.3 11.5 10.5 7 3.5 12 8.3 1.5 310.334.14.1 110 14.5 24 9 13.5 10.5 2.5 125 135 14.5 28.8 13 17.3 11.5 8.5 315.333.14.1 82 100 312.333.14.1 150 160 14.4 33.5 13.9 18.5 15 7 Geberit Silent-db20 Welding joints Connections 4.3 Connections 4.3.1 Welding joints 4.3.2 Push-in connections Geberit electrofusion coupling Geberit Silent-db20 expansion socket with double flange D H X D E E d E H Application purposes • For building drainage • For high-tensile, permanent connection of pipes and fittings Characteristics • Can be welded with Geberit electrofusion machine ESG 40/160, ESG 40/200 and ESG 3 • UV-resistant Technical data Installation temperature -10 - +40 °C Material PE-HD Art. no. DN d, ø [mm] D [cm] H
[cm] E [cm] X [cm] 363.771.16.1 56 56 6.8 6 2.8 0.3 365.771.16.1 70 75 8.9 6 2.8 0.3 366.771.16.1 90 90 10.4 6 2.8 0.3 367.771.16.1 100 110 12.5 6 2.8 0.3 312.771.16.1 125 135 15 6 2.8 0.3 369.771.16.1 150 160 17.8 6 2.8 0.3 X h 3 d D1 Application purposes • For building drainage • For buildings with increased sound insulation requirements • For horizontal and vertical installation • For combining with high-tensile pipe joints • For compensating for material expansion in fittings and pipes up to max. 6 m in length • For use with temperature differentials of between -10 and +60 °C • For use with Geberit pipe bracket one DN larger Characteristics • With expansion compensation • Abrasion resistant • Sound-absorbing • UV-resistant • With lip seal made of EPDM Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Scope of delivery • 1 protective c
ap Art. no. DN d, ø [mm] D [cm] D1 [cm] H [cm] h [cm] E [cm] X [cm] 307.012.14.1 70 75 10 9 19 3.7 6.5 6.2 308.012.14.1 90 90 12 11 19 3.4 6.5 6.2 310.012.14.1 100 110 13.5 12.5 20 3.3 9 6.2 312.012.14.1 125 135 15.8 16 19 3.3 6.5 6.2 83 Geberit Silent-db20 Waste fittings Clamping connectors 4.3.3 Clamping connectors 4.4 Waste fittings Geberit Silent-db20 clamping connector 4.4.1 Connection bends D Geberit Silent-db20 connection bend 90°, shortened, with small radius E E H d A a Application purposes • For building drainage • For buildings with increased sound insulation requirements • For combining with Geberit Silent-db20 double sleeve couplings • For connecting pipes and fittings d1 H Characteristics • With seal made of EPDM K Technical data Material CrTi steel 1.4510 (EN 10088) Art. no. DN d, ø [mm] D [cm] H [cm] 56 56 7.2 5 2.3 307.003.14.2 70 75 9.1 5 2.3 308.003.14.2 90 90 10
.6 5 2.3 310.003.14.2 100 110 12.6 5 Application purposes • For building drainage • For buildings with increased sound insulation requirements • For connecting sanitary appliances with horizontal outlet • For Geberit Kombifix elements for wall-hung WC E [cm] 305.003.14.2 d 2.3 312.003.14.2 125 135 14.5 5.2 2.5 315.003.14.2 150 160 17.3 7 Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant 3.3 Technical data Thermal expansion E E d1 Art. no. Technical data Stainless steel Art. no. DN d, ø [mm] d1, ø [mm] 359.426.00.2 359.434.00.2 D [cm] H [cm] E [cm] X [cm] 56 56 58 7.5 5.7 2.7 0.3 70 75-76 78 9.3 5.7 2.7 0.3 359.435.00.2 70 75-76 83-84 9.8 5.7 2.7 0.3 359.437.00.2 90 89-90 83-84 11.1 5.7 2.7 0.3 359.442.00.2 100 108-110 114-116 13.1 6.9 3.3 0.3 359.445.00.2 125 125 140-141 15.6 6.9 3.3 0.3 359.449.00.2 150 159-160 159-160 17.5 6.9 3.3 0.3 359.450.00.2
150 159-160 168 18.3 6.9 3.3 0.3 84 d1, ø [mm] 90 310.881.14.1 Characteristics • With seal made of EPDM d, ø [mm] 308.881.14.1 d Application purposes • For building drainage Material PE-S2 Scope of delivery • Lip seal made of EPDM D H X 0.43 W/(m*K) Material Geberit adapter clamping connector 0.17 mm/(m*K) Thermal conductivity pipe 4.3.4 Adapters to other product materials A [cm] a [cm] H [cm] 110 K [cm] 90 7.5 3.9 30 19 90 7.5 4.2 30 18 Geberit Silent-db20 Connection bends Waste fittings Geberit Silent-db20 connection bend 90°, extended Geberit double connection bend 90° A a X2 di D a d1 X1 d1 H d K Application purposes • For building drainage • For buildings with increased sound insulation requirements • For sleeves Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material Application purposes • For building dr
ainage • For buildings with increased sound insulation requirements • For Geberit Kombifix elements for wall-hung WC • For connecting sanitary appliances with horizontal outlet Characteristics • Fitting welded • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion d PE-S2 Technical data Thermal expansion Art. no. DN 305.905.14.1 d, ø [mm] di, ø [mm] D [cm] X1 [cm] 56 50 5.6 7.5 0.43 W/(m*K) Material 10 56 0.17 mm/(m*K) Thermal conductivity pipe X2 [cm] PE-S2 Scope of delivery • Lip seal made of EPDM Geberit Silent-db20 bend 90°, extended, with small radius Art. no. DN d, ø [mm] d1, ø [mm] A [cm] a [cm] H [cm] K [cm] 308.923.14.1 90 / 90 90 90 25 9 20.3 6 310.923.14.1 A a 100 / 90 110 90 25 9 20.3 6 d1 H K d Application purposes • For building drainage • For buildings with increased sound insulation requirements • For connecting sanitary appliances with horizon
tal outlet • For Geberit Duofix and Geberit GIS elements for wall-hung WC Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Scope of delivery • Lip seal made of EPDM Art. no. d, ø [mm] 308.883.14.1 310.883.14.1 d1, ø [mm] A [cm] a [cm] H [cm] K [cm] 90 N 90 11 4.9 30 19 110 90 10 4.3 30 19 85 Geberit Silent-db20 Accessories Air admittance valves 4.5 Accessories 4.5.1 Air admittance valves Geberit air admittance valve GRB50 for Geberit drainage systems L Geberit air admittance valve GRB90 for Geberit Silent-db20 L B h B H H h d/G d d d1 / d2 Application purposes • For ventilating discharge pipes • For building drainage • For gravity drainage systems • For discharge pipes with pipe dimensions ø 32 mm, ø 40 mm and ø 50 mm Characteristics • Anti-vacuum valve in accordance with EN 12380, Typ
e A I DN 303.900.00.1 50 Technical data d, ø [mm] Operating temperature Art. no. G [“] d1, ø [mm] 50 1 1/2 d2, ø B [mm] [cm] 32 40 H [cm] h [cm] L [cm] 7.3 3.5 8 7 Geberit air admittance valve GRB50 for Geberit drainage systems L B h H d/G d1 Application purposes • For ventilating discharge pipes • For building drainage • For gravity drainage systems • For discharge pipes with pipe dimensions ø 50 mm, ø 56 mm and ø 63 mm Characteristics • Anti-vacuum valve in accordance with EN 12380, Type A I Technical data Operating temperature -20 - +60 °C Scope of delivery • Thermal insulation cap • Sleeve Art. no. 305.900.00.1 86 Application purposes • For ventilating discharge pipes • For gravity drainage systems • For discharge pipes with pipe dimensions ø 75 mm, ø 90 mm and ø 110 mm -20 - +60 °C Scope of delivery • Thermal insulation cap • Sleeve • Adapter Art. no. d1 Characteristics • Thermal insul
ation integrated in housing • Anti-vacuum valve in accordance with EN 12380, Type A I Technical data Operating temperature di d, ø [mm] G [“] d1, ø [mm] B [cm] H [cm] h [cm] L [cm] 50 1 1/2 57 7 7.3 3.5 8 310.007.00.1 -20 - +60 °C d, ø [mm] d1, ø [mm] di, ø [mm] B [cm] H [cm] h [cm] L [cm] 90 99.5 75 12 14.1 5 19.5 Geberit Silent-db20 Pipe brackets Accessories 4.5.2 Pipe brackets 4.5.3 Fastenings for pipe brackets Geberit Silent-db20 pipe bracket, insulated, with threaded socket M10 / G 1/2 Geberit base plate, square, two-hole, with threaded socket M10 / G 1/2 G/M M/G B hH L a d L Application purposes • For anchor-point fastening of pipes in connection with doublesleeve coupling or expansion socket • For sliding bracket fastening of pipes Characteristics • Male thread • Female thread • Sound-absorbing • Outside zinc-plated Application purposes • For fastening pipe brackets to the building structure •
For fastening pipes to ceilings and walls • For anchor point and sliding bracket fastenings Characteristics • Male thread • Female thread • Zinc-plated • Two fastening points Technical data Material Steel Technical data Material Art. no. Steel DN Art. no. d, ø [mm] G [“] M [mm] L [cm] 362.851.26.1 G [“] M [mm] a [cm] B [cm] H [cm] h [cm] L [cm] 1/2 10 8.5 4 1.5 0.5 12 4.7 305.812.26.1 56 56 1/2 10 306.812.26.1 60 63 1/2 10 5 307.812.26.1 70 75 1/2 10 5.7 Geberit base plate, square, two-hole, with threaded socket G 308.812.26.1 90 90 1/2 10 6.4 310.812.26.1 100 110 1/2 10 7.4 312.812.26.1 125 125 1/2 10 8.1 312.813.26.1 125 135 1/2 10 8.7 a 315.812.26.1 150 160 1/2 10 9.9 L Geberit Silent-db20 pipe bracket, insulated, with threaded socket, G 1 G L d h G H B Application purposes • For building drainage • For fastening pipe brackets to the building structure • For fastening pi
pes to ceilings and walls • For anchor point and sliding bracket fastenings Characteristics • Female thread • Zinc-plated • Two fastening points Technical data Application purposes • For anchor-point fastening of pipes in connection with doublesleeve coupling or expansion socket • For sliding bracket fastening of pipes Material Art. no. 362.828.26.1 Steel G [“] a [cm] B [cm] H [cm] h [cm] L [cm] 1 9 4 2.6 0.6 12 Characteristics • Female thread • Sound-absorbing • Outside zinc-plated Technical data Material Art. no. 315.813.26.1 Steel DN d, ø [mm] G [“] L [cm] 150 178 1 12 87 Geberit Silent-db20 Accessories Sealings 4.5.4 Sealings Geberit threaded rod Geberit Silent-db20 end cap d Application purposes • For fastening Geberit pipe brackets to base plates • For building drainage • For fastening Geberit Pluvia support rails to base plates • For sliding bracket fastenings L Application purposes • For bu
ilding drainage • For buildings with increased sound insulation requirements • For creating pipeline terminations • For welding and tensioning Characteristics • Zinc-plated Technical data Material Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Steel Scope of delivery • Protective shell Art. no. M [mm] 10 Technical data L [cm] 50 Thermal expansion Geberit threaded pipe 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material 362.836.00.1 PE-S2 Art. no. L D DN d, ø [mm] L [cm] 305.005.14.1 56 56 3 Application purposes • For fastening Geberit pipe brackets to base plates • For building drainage • For anchor point and sliding bracket fastenings Characteristics • Female thread continuously threaded • Zinc-plated 307.005.14.1 70 75 3 308.005.14.1 90 90 3 310.005.14.1 G 100 110 3 312.005.14.1 125 135 3 Geberit Silent-db20 end cap, screwable L Technical data d Material Art.
no. 362.857.26.1 D Steel G [“] D [cm] L [m] 1/2 2.5 1 l Application purposes • For building drainage • For buildings with increased sound insulation requirements • For creating pipeline terminations • For creating service openings • For welding and tensioning Characteristics • Abrasion resistant • Sound-absorbing • UV-resistant Technical data Thermal expansion 0.17 mm/(m*K) Thermal conductivity pipe 0.43 W/(m*K) Material PE-S2 Art. no. 315.005.14.1 88 DN d, ø [mm] D [cm] L [cm] l [cm] 150 160 14.4 7.2 3.3 Geberit Silent-db20 Seals Accessories 4.5.5 Seals 4.5.6 Consumables Geberit sleeve Geberit lubricant, 250 ml L d1 d Application purposes • For bidets and washbasins Application purposes • For lubricating the seals of push-fit connections • For building drainage Technical data Material EPDM Art. no. 953.761.00.1 Art. no. d, ø [mm] d1, ø [mm] L [cm] 152.495.00.1 32 46 2.3 152.496.00.1 40 46 2.
3 152.796.00.1 40 44 2.3 153.564.16.1 32 58 2.3 153.565.16.1 40 58 2.3 153.566.16.1 50 58 2.3 Geberit grease pencil Application purposes • For building drainage Characteristics • Wax paint marker with paper jacket Geberit sleeve Art. no. di d 958.782.00.1 Application purposes • For bidets and washbasins Technical data Material Art. no. EPDM d, ø [mm] di, ø [mm] 152.682.00.1 32 44 152.689.00.1 32 50 152.690.00.1 40 50 152.691.00.1 32 57 152.692.00.1 40 57 152.693.00.1 50 57 89 Geberit Fire Protection, Sound Insulation and Moisture Protection 5. Geberit Fire Protection, Sound Insulation and Moisture Protection 5.1 Geberit fire protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 5.1.1 Fire protection for waste and drainage systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 5.2 Geberit sound insulation . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 93 5.2.1 5.2.2 Insulations for structure-borne sound decoupling . . . . . . . . . . . . . . . . . . . . . . . . . .93 Insulations for structure-borne sound decoupling and airborne sound insulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 5.3 Geberit moisture protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 5.3.1 5.3.2 Caulks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Puddle flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 91 Geberit Fire Protection, Sound Insulation and Moisture Protection Geberit fire protection Fire protection for waste and drainage systems 5.1 Geberit fire protection 5.1.1 Fire protection for
waste and drainage systems Geberit fire protection sleeve RS90 Plus DIN Geberit fire protection sleeve RS90 Plus EN d1 D d d1 D d l1 l1 L L Application purposes • For pipe feed-throughs 0°–90° in wall or ceiling • For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place • For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place • For later installation in ceilings and walls with fire resistance class F 30 to F 90 • For protection against the spread of smoke and fire Characteristics • Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11 • Sound-absorbing • National technical approval no. Z-19.17-1927 Application purposes • For pipe feed-throughs 0°–90° in wall or ceiling • For discharge pipes with pipe dimensions ø 40–200 mm • For direct installation in ceilings, drywalls or solid wa
lls in new installations • For later installation in ceilings, drywalls and solid walls • For protection against the spread of smoke and fire • Not suitable for passing other parts or aids through Characteristics • Sound-absorbing • Approval in accordance with EN • Fire resistance class S 90, R 90, EI 90 Technical data Material Technical data Material Steel Scope of delivery • Concrete screws • Structure-borne sound insulation • Adhesive strip Stainless steel Scope of delivery • Concrete screws • Structure-borne sound insulation • Adhesive strip • Information sign DN d, ø [mm] d1, ø [mm] D [cm] L [cm] l1 [cm] 348.200.00.1 30 - 56 32 - 56 66 7.8 8.5 5 348.201.00.1 60 / 70 63 / 75 83 10.2 8.5 5 348.202.00.1 90 90 95 11.6 8.5 5 348.203.00.1 100 110 116 14.1 8.5 5 348.204.00.1 125 125 / 135 142 16.7 10.5 7 348.205.00.1 150 160 170 19.8 11.5 8 348.206.00.1 200 200 208 25.1 12.5 9 92 DN
d, ø [mm] 348.300.00.1 Art. no. Art. no. 40 - 56 40 - 56 348.301.00.1 60 / 70 63 / 75 348.302.00.1 90 90 348.303.00.1 100 348.304.00.1 125 d1, ø [mm] D [cm] L [cm] l1 [cm] 66 7.8 8.5 5 83 10.2 8.5 5 96 11.9 8.5 5 110 117 14.5 8.5 5 125 / 135 142 17 10.5 7 348.305.00.1 150 160 170 20.6 11.5 8 348.306.00.1 200 200 213 27.2 12.5 9 Geberit Fire Protection, Sound Insulation and Moisture Protection Insulations for structure-borne sound decoupling Geberit sound insulation 5.2 Geberit sound insulation Geberit fire protection sleeve RS120 D di s H 5.2.1 Insulations for structure-borne sound decoupling Geberit insulation hose made of PE L s Application purposes • For protection against the spread of smoke and fire • For pipe feed-throughs in wall or ceiling • For horizontal installation in walls of fire resistance class F 30 to F 120 with Geberit Silent-db20 and Geberit HDPE • For vertical or oblique installation in
ceilings of fire resistance class F 30 to F 120 with Geberit Silent-db20, partly or completely mortared in place • For installation in ceilings over Geberit Silent-db20 clamping connector, insulation tape made of PE, insulation hose made of PE, electrofusion coupling and butt-welding connections or Isol sound insulation mat • For installation over pipe changes in direction Characteristics • Fire resistance class R 30, R 60, R 90 and R 120 in accordance with DIN 4102-11 • Sound-absorbing • Compound, intumescent, wrapped in foil • National technical approval no. Z-19.17-1807 Scope of delivery • Sealing cord, length 1.2 m • Insulation hose, length 1 m, cut open lengthwise • Aluminium adhesive tape, 2.0 m • 2 information signs Art. no. DN d, ø [mm] di, ø [mm] D [cm] s [mm] 56 56 76 13.2 28 60 63 85 14.1 28 30 307.820.00.1 70 75 99 15.5 28 30 Technical data Material PE-E Art. no. DN d, ø [mm] di, ø [mm] s [mm] L [m]
15 305.921.00.1 56 / 60 56 / 63 74 4 306.921.00.1 60 / 70 63 / 75 83 4 15 307.921.00.1 70 / 90 75 / 90 97 4 15 308.921.00.1 90 / 100 90 / 110 121 4 15 310.921.00.1 100 / 125 110 / 135 145 4 15 312.921.00.1 125 135 155 4 15 Geberit insulation tape made of PE L B 30 306.820.00.1 Application purposes • For structure-borne sound insulation of pipes • For concealed installation H [cm] 305.820.00.1 di d 308.820.00.1 90 90 114 17 28 30 310.820.00.1 100 110 134 19 28 30 312.820.00.1 125 135 160 21.6 28 30 315.820.00.1 150 160 185 24.1 28 34 s Application purposes • For structure-borne sound insulation of fittings • For structure-borne sound insulation of pipes • For concealed installation Characteristics • Sound-absorbing • Self-adhesive Technical data Material Art. no. 300.007.00.2 PE-E s [mm] B [cm] L [m] 3 7 3.6 93 Geberit Fire Protection, Sound Insulation and Moisture Protection Gebe
rit sound insulation Insulations for structure-borne sound decoupling and airborne sound insulation 5.2.2 Insulations for structure-borne sound decoupling and airborne sound insulation N ew Geberit sound insulation mat Isol Flex, pre-cut for pipe N ew Geberit sound insulation mat Isol Flex s B s B L Application purposes • For airborne sound insulation and structure-borne sound decoupling • Suitable to some extent for use as anti-condensation insulation for rainwater pipes Characteristics • Self-adhesive • Sound-absorbing • PVC-free • Precut to fit pipe diameter • Surface suitable for adhesive tape • Lead-free • Halogen-free • Fire protection class 5.2 in accordance with VKF • Building material class B2 in accordance with DIN 4102-1 • Building material class E in accordance with EN 13501-1 Technical data L Application purposes • For airborne sound insulation and structure-borne sound decoupling • Suitable to some extent for use as
anti-condensation insulation for rainwater pipes Characteristics • Sound-absorbing • PVC-free • Surface suitable for adhesive tape • Lead-free • Halogen-free • Fire protection class 5.2 in accordance with VKF • Building material class B2 in accordance with DIN 4102-1 • Building material class E in accordance with EN 13501-1 Technical data Installation temperature -5 - +40 °C -20 - +60 °C -20 - +80 °C Installation temperature -5 - +40 °C Storage temperature Storage temperature -20 - +60 °C Temperature resistance Temperature resistance -20 - +80 °C Art. no. Art. no. DN d, ø [mm] s [mm] B [cm] L [cm] 356.010.00.1 56 / 60 56 / 63 17 32 118 356.011.00.1 70 75 17 36 118 356.012.00.1 90 90 17 41 118 356.013.00.1 100 110 17 48 118 356.014.00.1 125 125 / 135 17 57 118 94 356.015.00.1 s [mm] B [cm] L [cm] 17 78 118 Geberit Fire Protection, Sound Insulation and Moisture Protection Caulks Geberit moisture pr
otection 5.3 Geberit moisture protection 5.3.1 Caulks 5.3.2 Puddle flanges Geberit moisture sealing with contact foil Resistit® Geberit puddle flange B D d d H L Application purposes • For bonded connections • For hot bitumen and sealing paint • For Geberit HDPE and Geberit Silent-db20 pipes and fittings • For water levels up to 1 m • For sealing pipe feed-throughs in walls, ceilings and floors • For protection against moisture • For connecting elastic bituminous seals (e.g. SBS bitumen) • Not suitable for connection of plastic caulk on bitumen base (e.g. APP sheets) Characteristics • With seal made of EPDM D b Application purposes • For Geberit HDPE and Geberit Silent-db20 pipes and fittings • For sealing pipe feed-throughs in walls, ceilings and floors • For protection against moisture and pressurised water up to 8 bar / 800 kPa Scope of delivery • 2 clamping bands made of stainless steel • Lubricant for rubber washers Art. n
o. Art. no. Sealing of connection DN d, ø [mm] D H L [cm] [cm] [cm] 361.673.00.1 EPDM (Resistit® Perfekt E) 50 50 13.5 2.5 50 363.673.00.1 EPDM (Resistit® Perfekt E) 56 56 13.5 2.5 50 365.673.00.1 EPDM (Resistit® Perfekt E) 70 75 19.5 2.5 50 366.673.00.1 EPDM (Resistit® Perfekt E) 90 90 19.5 2.5 367.673.00.1 EPDM (Resistit® Perfekt E) 100 110 19.5 2.5 125 21 2.5 D [cm] B [cm] b [cm] 50 125 d, ø [mm] 50 368.673.00.1 EPDM (Resistit® Perfekt E) DN 50 348.227.00.1 100 110 21 6 1 348.228.00.1 125 125 22.5 6 1 348.229.00.1 150 160 26 6 1 Geberit moisture sealing with contact foil Sarnafil PVC D d H L Application purposes • For Geberit HDPE and Geberit Silent-db20 pipes and fittings • For adhesive and welded connections • For welding with PVC foil • For water levels up to 1 m • For sealing pipe feed-throughs in walls, ceilings and floors • For protection against moisture Characteristics • With seal
made of EPDM Art. no. Sealing of connection DN d, ø [mm] D H [cm] [cm] L [cm] 361.674.00.1 PVC (Sarnafil G 410-18) 50 50 13.5 2.5 48 363.674.00.1 PVC (Sarnafil G 410-18) 56 56 13.5 2.5 48 365.674.00.1 PVC (Sarnafil G 410-18) 70 75 19.5 2.5 48 366.674.00.1 PVC (Sarnafil G 410-18) 90 90 19.5 2.5 48 367.674.00.1 PVC (Sarnafil G 410-18) 100 110 19.5 2.5 48 368.674.00.1 PVC (Sarnafil G 410-18) 125 125 21 2.5 48 95 Geberit Floor Drainage Systems 6. Geberit Floor Drainage Systems 6.1 Surface drainage systems for indoor and outdoor . . . . . . . . . . . . . . . . . . . . . . 98 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 Floor drains 10 x 10 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Floor drains 15 x 15 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Floor drains for balconies and terraces, 10 x 10 cm . . . . . . . .
. . . . . . . . . . . . . . . 102 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Floor drains 12 x 12 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 97 Geberit Floor Drainage Systems Surface drainage systems for indoor and outdoor Floor drains 10 x 10 cm 6.1 Surface drainage systems for indoor and outdoor 6.1.1 Floor drains 10 x 10 cm Geberit floor drain with inlet funnel made of PP, standard grating 10 x 10 cm 137 197 56 63 10 50 50 4-10 97 5 13 63 16 140 8 205 155 32 125 56 10 57-117 5 140 205 155 36 Application purposes • For connecting sanitary appliances • For thin bed applications • • • Characteristics • Quality-monitored in accordance with EN 1253-3 • PE-HD • Inlet rotatable by 280°, closed, for installation on a sanitary appliance Scope of delivery • Stainless ste
el grating • Trap • Protection box Height-adjustable with extension piece Trap insert can be removed without tools Load-bearing capacity, class H 1.5 (1.5 kN) Art. no. 364.673.00.1 Accessories • Geberit moisture sealing with contact foil Resistit® → p. 99 • Extension piece for Geberit floor drain, 10 x 10 cm → p. 103 • Installation frame for Geberit floor drains → p. 103 • Geberit cover, screwable, with sealing cover → p. 104 Geberit floor drain, standard grating 10 x 10 cm 10 50 137 -197 50 140 50 6 4-10 97 56 43-103 13 36 10 94 50 16 140 155 5 125 56 255 255 155 41 Application purposes • For connecting sanitary appliances • For thin bed applications • • • Characteristics • Quality-monitored in accordance with EN 1253-3 • PE-HD • Inlet rotatable by 280°, closed, for installation on a sanitary appliance Scope of delivery • Stainless steel grating • Trap • Protection box Art. no. 363.653.00.1
Accessories • Geberit moisture sealing with contact foil Resistit® → p. 99 • Extension piece for Geberit floor drain, 10 x 10 cm → p. 103 • Installation frame for Geberit floor drains → p. 103 • Geberit cover, screwable, with sealing cover → p. 104 98 Height-adjustable with extension piece Trap insert can be removed without tools Load-bearing capacity, class H 1.5 (1.5 kN) Geberit Floor Drainage Systems Floor drains 10 x 10 cm Surface drainage systems for indoor and outdoor Geberit moisture sealing with contact foil Resistit® Geberit floor drain with inlet funnel made of PP, standard grating 10 x 10 cm L 10 92 Application purposes • For Geberit floor drains with inlet funnel 85 10-14 55 5 Art. no. 363.662.00.1 Sealing of connection L [cm] EPDM (Resistit® Perfekt E) 50 11 50 Characteristics • Quality-monitored in accordance with EN 1253-3 • PE-HD • Inlet funnel height-adjustable 0–40 mm • Three straps for fastening slotted
flat irons • Inlet funnel can be used on angle to opposite base unit to 7.5% (- 4.2°) • Trap insert can be removed without tools • Not affected by frost • Load-bearing capacity, class H 1.5 (1.5 kN) Geberit moisture sealing with contact foil Sarnafil PVC L Application purposes • For Geberit floor drains with inlet funnel Art. no. Discharge rate Sealing of connection 363.663.00.1 Technical data PVC (Sarnafil G 410-18) Depth of water seal L [cm] 1.1 l/s 50 mm Scope of delivery • 1 protection plug • Stainless steel grating • 2 slotted flat irons • Trap 48 Geberit contact sheet 50 Art. no. 361.620.00.1 Accessories • Geberit moisture sealing with contact foil Resistit® → p. 99 • Geberit moisture sealing with contact foil Sarnafil PVC → p. 95 • Extension piece for Geberit floor drain, 10 x 10 cm → p. 103 • Geberit cover, screwable, with sealing cover → p. 104 Application purposes • For Geberit floor drains with inlet fun
nel Characteristics • Stainless steel Art. no. Sealing of connection 363.661.00.1 CrNi steel 1.4301 Geberit clamping flange 24 194 03 14 194 244 128 244 Application purposes • For Geberit floor drains with inlet funnel • For connecting foils up to 4 mm thick Art. no. 363.665.00.1 99 Geberit Floor Drainage Systems Surface drainage systems for indoor and outdoor Floor drains 15 x 15 cm Geberit floor drain with straight connector made of PVC, standard grating 10 x 10 cm 15 10 92 85 10-14 55 5 50 11 Characteristics • Quality-monitored in accordance with EN 1253-3 • PE-HD • Inlet funnel height-adjustable 0–40 mm • Three straps for fastening slotted flat irons • Inlet funnel can be used on angle to opposite base unit to 7.5% (- 4.2°) • Trap insert can be removed without tools • Not affected by frost • Load-bearing capacity, class H 1.5 (1.5 kN) Technical data Discharge rate 1.1 l/s Depth of water seal 50 mm Scope of delivery •
1 protection plug • Stainless steel grating • 2 slotted flat irons • Trap Art. no. 361.621.00.1 Accessories • Geberit moisture sealing with contact foil Resistit® → p. 99 • Geberit moisture sealing with contact foil Sarnafil PVC → p. 95 • Extension piece for Geberit floor drain, 10 x 10 cm → p. 103 • Geberit cover, screwable, with sealing cover → p. 104 6.1.2 Floor drains 15 x 15 cm Geberit HDPE floor drain, standard grating 15 x 15 cm 15–12 d d1 13 h 165 18 15 125 L 125 Application purposes • For use inside buildings Characteristics • Quality-monitored in accordance with EN 1253-3 • Certified in accordance with Qplus • Inlet not rotating, closed • Load-bearing capacity, class L 15 (15 kN) • Height-adjustable with extension set or extension piece • Aerodynamic and self-cleaning design • Trap insert can be removed without tools Art. no. DN d, ø [mm] d1, ø [mm] h [cm] 70 75 56 13 19 Accessories • Geberit
standard grating, suitable for parking decks → p. 104 • Geberit standard grating, not load-bearing → p. 104 • Funnel extension set for Geberit floor drain, 15 x 15 cm → p. 104 • Extension piece for Geberit floor drain, 15 x 15 cm → p. 103 • Geberit HDPE contact sheet with section seal, stainless steel → p. 101 • Installation frame for Geberit floor drains → p. 103 100 Shockproof Resistant to chemicals Not affected by frost Scope of delivery • 1 protection box cover • Section seal made of EPDM • Stainless steel grating • Base unit made of PE-HD • Trap L [cm] 365.630.16.1 • • • Geberit Floor Drainage Systems Floor drains 15 x 15 cm Surface drainage systems for indoor and outdoor Geberit HDPE floor drain, standard grating 15 x 15 cm 15-12 165 18 13 d1 d h 15 125 125 L Application purposes • For use inside buildings • • • Characteristics • Quality-monitored in accordance with EN 1253-3 • Certified
in accordance with Qplus • Inlet not rotating, closed • Load-bearing capacity, class L 15 (15 kN) • Height-adjustable with extension set or extension piece • Aerodynamic and self-cleaning design • Trap insert can be removed without tools • Shockproof Art. no. 367.630.16.1 DN d, ø [mm] d1, ø [mm] h [cm] 110 56 11 Scope of delivery • 1 protection box cover • Section seal made of EPDM • Stainless steel grating • Base unit made of PE-HD • Reducer, ø 110/75 mm • Trap L [cm] 100 Resistant to chemicals Not affected by frost Discharge rate depending on head of water 25 Accessories • Geberit standard grating, suitable for parking decks → p. 104 • Geberit standard grating, not load-bearing → p. 104 • Funnel extension set for Geberit floor drain, 15 x 15 cm → p. 104 • Extension piece for Geberit floor drain, 15 x 15 cm → p. 103 • Geberit HDPE contact sheet with section seal, stainless steel → p. 101 • Installation f
rame for Geberit floor drains → p. 103 Geberit HDPE floor drain, standard grating 15 x 15 cm 15 13 83 d 25 Characteristics • Load-bearing capacity, class H 1.5 (1.5 kN) • PE-HD Art. no. 361.666.16.1 Scope of delivery • 1 base unit • Cast iron grating d, ø [mm] 50 Geberit HDPE contact sheet with section seal, stainless steel 3 39 39 Application purposes Art. no. For Geberit floor drains, standard grating 15 x 15 cm Sealing of connection 388.130.00.1 • CrNi steel 1.4301 101 Geberit Floor Drainage Systems Surface drainage systems for indoor and outdoor Floor drains for balconies and terraces, 10 x 10 cm Geberit HDPE contact sheet with section seal, PVC-coated 3 6.1.3 Floor drains for balconies and terraces, 10 x 10 cm Geberit floor drain, standard grating 10 x 10 cm 39 10 2-7 39 112 d Application purposes • For Geberit floor drains, standard grating 15 x 15 cm Art. no. Sealing of connection 388.131.00.1 CrNi steel, PVC-coated 7 Chara
cteristics • Load-bearing capacity, class H 1.5 (1.5 kN) • Aerodynamic and self-cleaning design • Shockproof • Resistant to chemicals • Not affected by frost • Height-adjustable 2–7 cm • Not trapped • Low construction height Technical data Discharge rate 1 l/s Scope of delivery • Inlet funnel made of PP • Sleeve made of EPDM • Stainless steel grating • Base unit made of PE-HD Art. no. 364.637.00.1 d, ø [mm] 63 Accessories • Geberit contact sheet with protective cap, tin-plated → p. 102 • Extension piece for Geberit floor drain, 10 x 10 cm → p. 103 Geberit contact sheet with protective cap, tin-plated 2 25 25 Application purposes • For Geberit floor drains, outlet vertical Characteristics • Stainless steel • Tin-plated Scope of delivery • Protective cap Art. no. 102 Colour / Surface Sealing of connection 388.123.24.1 tin-plated CrNi steel, tin-plated Geberit Floor Drainage Systems Accessories Surface dra
inage systems for indoor and outdoor 6.1.4 Accessories Geberit contact sheet with protective cap, coated Installation frame for Geberit floor drains 2 12 25 2-24 25 Application purposes • For Geberit floor drains, outlet vertical Characteristics • Stainless steel • PVC-coated Application purposes • For Geberit floor drains with inlet funnel • For Geberit floor drains, standard grating 15 x 15 cm Scope of delivery • Protective cap Characteristics • Steel, zinc-plated Art. no. Colour / Surface Sealing of connection 388.124.28.1 plastic coated CrNi steel, PVC-coated Art. no. 388.132.00.1 Ready-to-fit-set for Geberit collector drain Extension piece for Geberit floor drain, 15 x 15 cm 124 35−65 15 Application purposes • For use inside buildings • For Geberit collector drain made of PE-HD Characteristics • Frame and design cover made of stainless steel • Design cover can be tiled on the back side • Load-bearing capacity, cl
ass H 1.5 (1.5 kN) Scope of delivery • Design cover • 1 grating frame • Sleeve made of EPDM 109 25-14 164 Application purposes • For Geberit floor drains, standard grating 15 x 15 cm Characteristics • PE-HD Art. no. 388.135.00.1 Extension piece for Geberit floor drain, 10 x 10 cm Art. no. 16 388.005.00.1 10 16 2 K 113 10 Application purposes • For Geberit floor drains with inlet funnel Technical data Material Art. no. 363.660.00.1 PP K [cm] 5 103 Geberit Floor Drainage Systems Surface drainage systems for indoor and outdoor Funnel extension set for Geberit floor drain, 15 x 15 cm Accessories Geberit cover, screwable, with sealing cover 92 25-24 Application purposes • For sealing Geberit floor drains with standard grating 10 x 10 cm Application purposes • For Geberit floor drains, standard grating 15 x 15 cm Characteristics • PE-HD Characteristics • Cover plate made of stainless steel Scope of delivery • Plug • Cover
plate Art. no. 388.136.16.1 Art. no. 388.129.00.1 Geberit standard grating, suitable for parking decks 135 Geberit inlet funnel made of PVC can be cut to length 17 10 93 10 17 93 Application purposes • For Geberit floor drains, standard grating 15 x 15 cm Characteristics • Load-bearing capacity, class L 15 (15 kN) • Stainless steel 7x1 9 10 Application purposes • For Geberit floor drains, standard grating 10 x 10 cm Art. no. Art. no. Colour / Surface 388.133.00.1 854.693.94.1 iron grey RAL 7011 Geberit standard grating, not load-bearing 135 Geberit inlet funnel made of PP can be cut to length 10 93 Art. no. 388.134.00.1 104 936 7x1 9 Application purposes • For Geberit floor drains, standard gra