Tencuiala termoizolanta naturala cu pluta NZEBSHOP Diathonite Thermactive .037
23151812
THERMAL – ACOUSTIC INSULATION – plasters
DIATHONITE THERMACTIVE.037
Cork-based thermal plaster, applicable by spraying
Diathonite Thermactive.037 is an eco-friendly Exterior Insulation Finishing System - EIFS, whose
main ingredients are granulated recycled cork, expanded amorphous silica, perlite and pumice
combined in a balanced particle size distribution curve (0 - 3 mm / 0 - 0.12 in). Natural hydraulic
lime NHL 5 is also present in the compound; therefore, the product is antibacterial and prevents
the formation of moulds and fungi. Diathonite Thermactive.037 is a highly porous, light-weight,
breathable, thermal insulation plaster; it has an excellent fire reaction performance (noncombustible); it is not damaged by dampness and it is recyclable as an inert at the end of its life
cycle. This thermo-plaster offers a versatile, monolithic and highly resistant solution to protect
buildings from cold and hot weather. It contributes to the thermo-hygrometric comfort of indo
or
spaces and it maintains its characteristics over its lifespan. The product is ready to use by
plastering machine or by trowel.
BENEFITS
COLOUR
• Insulates from cold and heat, ensuring
good thermal lag, up to 12 hours
depending on the characteristics of the
wall.
• Lightweight.
• High breathability and high porosity.
• Avoids mould and condensation.
• Absorbs and releases the excess
humidity.
• Ideal for historic restoration.
• Protects masonry over time.
• Eco-friendly.
• Fast construction system (thermal brick +
thermal plaster), and quick application
(plastering machine).
• Made of natural hydraulic lime NHL 5
(EN 459-1).
• It can be applied on top of old plasters.
• Reaction to fire: class A1.
• External insulation with no need for
joints.
• Product with double CE (EN 998-1, EN
998-2) and UKCA certification (BS EN
998-1, BS EN 998-2).
Light grey.
PACKAGING
15 kg (33.07 lb) paper bag.
Pallet: n° 60 paper bags (900 kg – 1984 lb).
APPLICATION FIE
LDS
Lightweight eco-friendly thermo-plaster for
indoor and outdoor applications, suitable for
thermal insulation and dehumidification. It
solves the problems related to thermal bridges
and moulds induced by humidity, ensuring a
healthy environment and a high living comfort.
In addition, Diathonite Thermactive.037 is a
natural compound and it is suitable where
environmentally friendly materials are required.
YIELD
2.60 kg/m2 (±20%) per cm of thickness.
1.35 lb/ft2 (±20%) per inch of thickness.
1/8
Whereas all indications and recommendations supplied herein are stated to the best of
our experience and knowledge, they should be considered as indicative only and
should be confirmed by exhaustive practical applications. Diasen doesn’t know the
peculiarity of the processing, or the characteristics of the support. Therefore, the
applicator should carry out preliminary tests, to verify the suitability to the foreseen
application, and in any case, he will take the responsibility of the i
ntended use. In case
of uncertainties or doubts, please contact the company’s technical department,
provided that this is only a simple assistance for the applicator: he should have the
appropriate capabilities and experience to determine the more suitable solution. Always
respect the latest update of the technical sheet available on www.diasen.com website.
THERMAL – ACOUSTIC INSULATION – plasters
DIATHONITE THERMACTIVE.037
Cork-based thermal plaster, applicable by spraying
sheet). To uniform the substrate, use a limebased mortar to preserve breathability.
STORAGE
Store the product in its original packaging,
tightly closed, away from sun, water and frost
and kept at temperature between +5°C / +41°F
and + 35°C / +95°F. Storage time: 12 months.
Old plaster
Ensure that the plaster is consistent and well
attached to the support, otherwise provide for
partial or total removal. Whenever salt
efflorescence is present, remove the damaged
plaster and apply the Diathonite Regular
ization
(see technical data sheet). With painted
plasters, given the wide variety of paints on the
market, it is recommended to make an
adhesion test to verify the suitability for the
application or the need to use the primer
Aquabond.
On smooth plasters apply the Aquabond
primer or, if necessary, perform a staking of the
support. On rough plasters proceed with the
direct application of Diathonite Thermactive.037
Before the application, it is always necessary to
verify that the existing plaster is compatible with
the characteristics and composition of
Diathonite Thermactive.037; in case of gypsumbased plasters, it is recommended the complete
removal before the application of cork based
thermal plaster, in order to avoid compromising
the stability of the system due to material
incompatibility.
PREPARATION OF THE SUPPORT
The support must be completely hardened and
solid. The surface must be thoroughly cleaned,
dry, well-bonded, without crumbly and
inconsistent parts, perfectly levelled,
and free of
dust and dirt. Before applying the product, it is
recommended to cover each element that
should not be coated.
Bricks/Blocks
In case of bricks, the primer is not needed, and
Diathonite Thermactive.037 can be applied
directly to the substrate.
Concrete
In case of distressed and crumbly concrete,
restoration with suitable cement mortar should
be planned. For the treatment of reinforcing
steel bars apply suitable anti-corrosion
products.
Smooth: apply the Aquabond primer (see
technical data sheet).
Rough: primer is not needed, apply the
plaster directly to the substrate.
Panels
Diathonite Thermactive.037 can be applied on
untreated cork panels without using a
primer. Due to the wide variety of panels
available on the market, it is recommended to
carry out an adhesion test to verify the
suitability for the direct application of Diathonite
Thermactive.037 or the need to first use the
primer Aquabond.
To ensure best results, make sure that the
panels are installed tightly.
C
ellular Concrete
Diathonite Thermactive.037 can be applied over
cellular concrete panels without primer.
Masonry
If necessary, clean the surface with water jet
cleaner or brush the surface. Check the
masonry, restore damaged or not fixed bricks or
stones. If there is salt efflorescence, apply
Diathonite Regularization (see technical data
Wood
On non-treated wooden supports, proceed with
the
direct
application
of
Diathonite
Thermactive.037 plaster.
2/8
Whereas all indications and recommendations supplied herein are stated to the best of
our experience and knowledge, they should be considered as indicative only and
should be confirmed by exhaustive practical applications. Diasen doesn’t know the
peculiarity of the processing, or the characteristics of the support. Therefore, the
applicator should carry out preliminary tests, to verify the suitability to the foreseen
application, and in any case, he will take the responsibility of the intended use. In case
of uncertainties or doubts
, please contact the company’s technical department,
provided that this is only a simple assistance for the applicator: he should have the
appropriate capabilities and experience to determine the more suitable solution. Always
respect the latest update of the technical sheet available on www.diasen.com website.
THERMAL – ACOUSTIC INSULATION – plasters
DIATHONITE THERMACTIVE.037
Cork-based thermal plaster, applicable by spraying
With smooth or treated wood, first proceed with
priming the surface with Aquabond.
4.
To secure corners and edges provide for
the use of aluminium corner guards.
These aluminium guards must be fixed
with Diathonite Thermactive.037 to avoid
thermal bridges.
5. It is essential to wet the plaster before
applying each layer.
6. With a masonry trowel apply a layer of
Diathonite Thermactive.037, taking care
to create a thickness that can reach up to
4 cm (1.6 inches).
7. If the desired thickness can’t be reached
with the first coat, when the underlying
l
, please contact the company’s technical department,
provided that this is only a simple assistance for the applicator: he should have the
appropriate capabilities and experience to determine the more suitable solution. Always
respect the latest update of the technical sheet available on www.diasen.com website.
THERMAL – ACOUSTIC INSULATION – plasters
DIATHONITE THERMACTIVE.037
Cork-based thermal plaster, applicable by spraying
With smooth or treated wood, first proceed with
priming the surface with Aquabond.
4.
To secure corners and edges provide for
the use of aluminium corner guards.
These aluminium guards must be fixed
with Diathonite Thermactive.037 to avoid
thermal bridges.
5. It is essential to wet the plaster before
applying each layer.
6. With a masonry trowel apply a layer of
Diathonite Thermactive.037, taking care
to create a thickness that can reach up to
4 cm (1.6 inches).
7. If the desired thickness can’t be reached
with the first coat, when the underlying
l
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
10 p | EN
Acoustix Plus
Fisa tehnica
7 p | EN
Deumix