Tencuiala dezumidificatoare și de asanare NZEBSHOP Deumix
24071218
THERMAL – ACOUSTIC INSULATION – plasters
DIATHONITE DEUMIX+
Dehumidifying, eco-friendly and anti-saline plaster
Macroporous lightweight plaster that combines in a single product the properties of a
dehumidifying plaster and an anti-saline rough coat. In fact, Diathonite Deumix+ is designed for
dehumidification and, at the same time, prevents salts from migrating to the wall surface. The
product consists of natural materials such as cork (grain size 0-3 mm / 0-1.18 in), clay, natural
hydraulic lime NHL 5 and special additives that improve the adhesion and breathability of the
product. The macroporosities characterizing the structure of the product are able to
accommodate the salts present in the walls and allow the water to evaporate.
BENEFITS
APPLICATION FIELDS
•
•
•
•
•
•
•
•
•
•
•
High porosity.
High breathability.
Eco-friendly.
Excellent compression resistance.
Excellent water repellent properties.
Reaction to fire: class A1. Does not burn
or
produce smoke.
Low thermal conductivity, which limits the
phenomena of surface and interstitial
condensation, contributing to the thermal
insulation of the wall.
Perfectly compatible with lime and
silicate mineral finishes.
Respects
the
thermo-hygrometric
balance of the support.
Applicable on damp masonry of any type
by hand or with plastering machine.
Product with double CE (EN 998-1, EN
998-2) and UKCA certification (BS EN
998-1, BS EN 998-2).
Ready-to-use plaster for indoor and outdoor
applications. Suitable for the implementation of
dehumidification interventions, even for cases
of onto-the-ground masonry. The product
prevents salts from migrating to the surface and
is suitable for the restoration of walls affected
by capillary rising humidity. Diathonite Deumix+
solves problems related to the presence of
mould (induced by humidity), ensuring a healthy
environment and high living comfort. Diathonite
Deumix+ is a completely natural and suitable
compound where environmentally frien
dly
materials are required.
STORAGE
Store the product in its original containers
tightly closed, away from sun, water and frost,
and kept at temperature between +5°C / +41°F
and +35°C / +95°F. Storage time: 18 months.
YIELD
PREPARATION OF THE SUPPORT
4,40 kg/m2 (±10%) per cm of thickness.
0.90 lb/ft2 (±10%) per inch of thickness.
The support must be completely hardened and
resistant enough. The surface must be
thoroughly cleaned, dry, well-established, with
COLOUR
Light grey.
PACKAGING
20 kg (44 lb) paper bag.
Pallet: n° 60 paper bags (1200 kg – 2646 lb).
1/7
Whereas all indications and recommendations supplied herein are stated to the best of
our experience and knowledge, they should be considered as indicative only and
should be confirmed by exhaustive practical applications. Diasen doesn’t know the
peculiarity of the processing, or the characteristics of the support. Therefore, the
applicator should carry out preliminary tests, to verify the suitability to the fore
seen
application, and in any case, he will take the responsibility of the intended use. In case
of uncertainties or doubts, please contact the company’s technical department,
provided that this is only a simple assistance for the applicator: he should have the
appropriate capabilities and experience to determine the more suitable solution. Always
respect the latest update of the technical sheet available on www.diasen.com website.
THERMAL – ACOUSTIC INSULATION – plasters
DIATHONITE DEUMIX+
Dehumidifying, eco-friendly and anti-saline plaster
no crumbly and inconsistent parts perfectly
levelled, and free of dust and/or dirt. Remove
any trace of oils, fats, waxes and any saline
efflorescence present.
order to avoid compromising the stability of the
system due to material incompatibility.
Concrete
Depending on the degree of water absorption of
the support, and also taking into account the
environmental conditions, it is recommended to
dose the right amount of water needed for
achieving the correct adhesion.
MIXING
In case of distressed and crumbly concrete,
restoration with suitable cement mortar should
be planned. For the treatment of reinforcing
steel bars apply suitable anti-corrosion
products.
Smooth: apply the Aquabond primer (see
technical data sheet).
Rough: primer is not needed, apply the
plaster directly to the substrate.
Therefore, the amount of water specified is
indicative.
•
Masonry
If necessary, clean the surface with water jet
cleaner or brush the surface. Check the
masonry, restore damaged or not fixed bricks
and stones. If there are salts, apply Diathonite
Regularization (see technical data sheet) or
another lime-based mortar.
To uniform the substrate, use a lime-based
mortar to keep breathability.
•
•
If mixed with a concrete mixer or a
mixing drill, add 12 - 15 L of clean water
for each bag of Diathonite Deumix+ (20
kg). Do not proceed mixing more than
3-4 minutes when using the concrete
mixer. Load the content of the bags
ins
ide the hopper and adjust the flow
meter of the machine: firstly, set it to 400600 L/h to moisten the tube, and then
adjust the flow to 300-350 L/h to proceed
with the application.
The blend must present a foamy
consistency.
Do not add external compounds to the
mixture.
Old plaster
APPLICATION
Completely remove the existing plaster up to 1
meter above the band where moisture is
visible. With painted plasters, given the wide
variety of paints on the market, it is
recommended to make an adhesion test to
verify the suitability for the application or the
need to use the primer Aquabond (see
technical data sheet). On smooth plasters apply
the Aquabond (see technical data sheet) primer
or, if necessary, perform a staking of the
support. On rough plasters proceed with direct
application of Diathonite Deumix+. Before the
application, it is always necessary to verify that
the existing plaster is compatible with the
characteristics and composition of Diathonite
Deumix+; in case of gypsum-based
plasters, it
is recommended the complete removal before
the application of cork based thermal plaster, in
Application by hand
1.
2.
3.
2/7
It is essential to wet the support,
especially in summer and in case of walls
directly exposed to the sun. In case the
surfaces were primed beforehand, it is
not necessary to wet the support.
For low-thickness applications, set up
reference points or bands to obtain the
required thicknesses. With a masonry
trowel apply Diathonite Deumix+ in a
single layer, making sure to create a
thickness of 2,5 – 3,00 cm (0.98 – 1.18
inches) in one go.
For higher thicknesses, apply a first layer
of Diathonite Deumix+ and let it dry.
Above the applied layer, set up points or
reference bands as guidelines to obtain
Whereas all indications and recommendations supplied herein are stated to the best of
our experience and knowledge, they should be considered as indicative only and
should be confirmed by exhaustive practical applications. Diasen doesn’t know
plasters, it
is recommended the complete removal before
the application of cork based thermal plaster, in
Application by hand
1.
2.
3.
2/7
It is essential to wet the support,
especially in summer and in case of walls
directly exposed to the sun. In case the
surfaces were primed beforehand, it is
not necessary to wet the support.
For low-thickness applications, set up
reference points or bands to obtain the
required thicknesses. With a masonry
trowel apply Diathonite Deumix+ in a
single layer, making sure to create a
thickness of 2,5 – 3,00 cm (0.98 – 1.18
inches) in one go.
For higher thicknesses, apply a first layer
of Diathonite Deumix+ and let it dry.
Above the applied layer, set up points or
reference bands as guidelines to obtain
Whereas all indications and recommendations supplied herein are stated to the best of
our experience and knowledge, they should be considered as indicative only and
should be confirmed by exhaustive practical applications. Diasen doesn’t know
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
8 p | EN
Diathonite Thermactive .037
Fisa tehnica
10 p | EN
Acoustix Plus