Tencuiala decorativa din pluta NZEBSHOP Decork Mediterraneo
24410709
CORK-BASED DECORATIVE FINISH
DECORK MEDITERRANEO
Coloured, ecological, water repellent, breathable, thermal cork-based finish (grain size 0 –
300 µm)
A coloured finishing coating with a grain size of 0 - 300 µm, formulated with cork and clay, waterbased resins and high-tech water-based biopolymer designed to increase the product's
mechanical properties and water repellence. Decork Mediterraneo is characterised by its high
thermal insulating, water-repellent and breathable properties. Ecological product, to be used for
coloured finishing of old and new facades, thermal plasters (such as Diathonite Evolution or
Diathonite Thermactive.037), thermal insulation systems and pitched roofs. It can be used both
indoors and outdoors, for wall and floor decoration. It prevents the absorption of meteoric water
by the masonry and prolongs the life of the plaster.
BENEFITS
COLOUR
• Breathable and water resistant, it avoids
the formation of moulds.
• Suitable and ideal for crac
ked substrates,
it avoids reinforced skim coat.
• Highly elastic, it is ideal on cracked
plasters.
• In combination with thermal plasters
(such as Diathonite Thermactive.037)
maintains an excellent thermal comfort.
• Resistant to UV rays, atmospheric
factors,
industrial
and
marine
environments, and to low and high
temperatures.
• Low-thickness application
• Rustic effect finish (‘Tonachino’ effect).
• Formulated with natural raw materials.
• Easy and quick application.
• Product suitable for indoor and outdoor
applications.
• Designed for both wall and floor
decoration.
Choice from colour chart, with the possibility of
creating custom colours.
PACKAGING
10 kg plastic bucket of neutral product, to which
it can be added 0.250 kg / 0.500 kg / 1.000 kg /
2.000 kg plastic bucket (depending on the
shade chosen) of toner.
• Pallet with neutral Decork Mediterraneo
only: 64 buckets of 10 kg each (640 kg);
o
o
o
YIELD
0.25 – 0.4 kg/m2 in 2 coats for brush and roll
applications per 0.6mm thickness.
0.051 – 0.082 lb/ft2 in 2 coats for brush and
roll applications per 0.019-inch thickness
Pallet
with
neutral
Decork
Mediterraneo + 0,250 kg toner: 64
buckets of 10 kg (640 kg) + 64
packages of toner (19 kg).
Pallet
with
neutral
Decork
Mediterraneo + 0,500 kg toner: 64
buckets of 10 kg (640 kg) + 64
packages of toner (32 kg).
Pallet
with
neutral
Decork
Mediterraneo + 1,00 kg toner: 64
buckets of 10 kg (640 kg) + 64
packages of toner (64 kg).
0.5 – 0.7 kg/m2 in 2 coats for spatula and
spray applications per 0.5 mm thickness.
0.10 – 0.14 lb/ft2 in 2 coats for spatula and
spray applications per 0.019-inch thickness.
1/8
Whereas all indications and recommendations supplied herein are stated to the
best of our experience and knowledge, they should be considered as indicative
only and should be confirmed by exhaustive practical applications. Diasen
doesn’t know the peculiarity of the processing, or the characteristics of the
support. Therefore, th
e applicator should carry out preliminary tests, to verify the
suitability to the foreseen application, and in any case, he will take the
responsibility of the intended use. In case of uncertainties or doubts, please
contact the company’s technical department, provided that this is only a simple
assistance for the applicator: he should have the appropriate capabilities and
experience to determine the more suitable solution. Always respect the latest
update of the technical sheet available on www.diasen.com
CORK-BASED DECORATIVE FINISH
DECORK MEDITERRANEO
Coloured, ecological, water repellent, breathable, thermal cork-based finish (grain size 0 – 300
µm)
o
Pallet
with
neutral
Decork
Mediterraneo + 2,00 kg toner: 48
buckets of 10 kg (480 kg) + 48
packages of toner (96 kg).
called Argatherm and then apply the specific
fixative D20 (see data sheet).
Old plaster
APPLICATION FIELDS
Ensure that the plaster is consistent and well
adhered to the substrate; if not, consider partial
or total removal and redoing it. In the case of
painted plasters, given the wide variety of
paints on the market, it is advisable to perform
an adhesion test to verify suitability for
application or the need to use a primer. On
smooth, cracked and micro-cracked substrates,
apply white-colored Color Primer. On noncracked but dusty substrates, proceed with the
application of D20. On dusty, smooth and
cracked substrates, application of both products
is recommended.
Product designed for the finishing coating of
facades, old and new plasters, thermal plasters
such as Diathonite Evolution and Diathonite
Thermactive.037 (see relevant technical data
sheets), coating systems or pitched roofs.
STORAGE
The product must be stored in its original tightly
closed containers, in a well-ventilated place,
away from sunlight, water and frost, at
temperatures between +5°C and +35°C.
Storage time: 12 months.
Plasterboard
On plasterboard surfaces, make sure joints are
grouted and sanded properly, and
then apply
D20 fixative first, then Color Primer (see data
sheets).
PREPARATION OF THE SUPPORT
The substrate must be completely hardened
and have sufficient strength. The surface must
be perfectly level, thoroughly clean, dry, and
free of oil, grease, crumbling and inconsistent
parts or other materials that may damage the
product's adhesion. In the case of hydrocleaning, wait until the substrate is completely
dry. In cases where the surface is crumbly as a
whole, scarify it completely until a good
substrate is obtained and restore lesions or
degraded parts with suitable mortar. In the case
of a cracked substrate, check the adhesion of
the existing layer. Decork Mediterraneo
adheres to various types of support; however, it
is recommended to carry out a preliminary test
to check adhesion and the possible need to use
a primer.
Concrete
In the case of newly made cement foundation, it
must be sufficiently seasoned. If there are
cracks, holes or irregular areas, restore them
with suitable
cementitious mortar. To treat
reinforcing bars, apply suitable passivating
agent. For better adhesion on smooth, non-wet
concrete, the use of Color Primer is
recommended (see data sheet). On damp
substrates and/or subject to rising damp, the
use of WATstop is required (see data sheet).
WATstop can also be used to fill small cracks or
crazing.
Wood
Plaster from the Diathonite line or new
plasters
Thoroughly clean the surface by removing dust,
brittle parts and flakes in the process of
detachment. The wood should appear
completely dry, well cohesive and dimensionally
stable. Prime wood surfaces with Color Primer
Ensure that the plaster is well levelled so that
the surface remains as little rough as possible;
Shave the surface with the lime-based product
2/8
Whereas all indications and recommendations supplied herein are stated to the
best of our experience and knowledge, they should be considered as indicative
only and should be confirmed by exhaustive practical applications. Diase
n
doesn’t know the peculiarity of the processing, or the characteristics of the
support. Therefore, the applicator should carry out preliminary tests, to verify the
suitability to the foreseen application, and in any case, he will take the
responsibility of the intended use. In case of uncertainties or doubts, please
contact the company’s technical department, provided that this is only a simple
assistance for the applicator: he should have the appropriate capabilities and
experience to determine the more suitable solution. Always respect the latest
update of the technical sheet available on www.diasen.com
CORK-BASED DECORATIVE FINISH
DECORK MEDITERRANEO
Coloured, ecological, water repellent, breathable, thermal cork-based finish (grain size 0 – 300
µm)
(see data sheet) before proceeding with the
application of Decork Mediterraneo. Do not
apply the product to boards, matchboards or
substrates with a large number of joints. In this
case, shaving with Argatherm product
reinfor
n
doesn’t know the peculiarity of the processing, or the characteristics of the
support. Therefore, the applicator should carry out preliminary tests, to verify the
suitability to the foreseen application, and in any case, he will take the
responsibility of the intended use. In case of uncertainties or doubts, please
contact the company’s technical department, provided that this is only a simple
assistance for the applicator: he should have the appropriate capabilities and
experience to determine the more suitable solution. Always respect the latest
update of the technical sheet available on www.diasen.com
CORK-BASED DECORATIVE FINISH
DECORK MEDITERRANEO
Coloured, ecological, water repellent, breathable, thermal cork-based finish (grain size 0 – 300
µm)
(see data sheet) before proceeding with the
application of Decork Mediterraneo. Do not
apply the product to boards, matchboards or
substrates with a large number of joints. In this
case, shaving with Argatherm product
reinfor
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
8 p | EN
Diathonite Thermactive .037
Fisa tehnica
10 p | EN
Acoustix Plus