Brosura element unghiular de montaj EJOT Iso-Corner
Anwendungen
Applications | Products
Produkte | Special
Spezial
EJOT® Iso-Corner
Approved fastening element for the planned retro-fitting
of medium heavy to heavy attachments to ETICS facades
Bringing it together.
Mounting elements for attachments
EJOT® Iso-Corner
Product description
Certifications
The EJOT Iso-Corner is an installation angle made of polyurethane hard foam for the planned attachment of add-on parts to
ETIC systems.
Together with an anchor set that is tuned to the substrate, as
well as an EJOT Delta PT 100 screw for fastening the attachment in the support element, this results in a perfectly coordinated fastening system on the installation angle.
ETA-20/0159
Z-10.9-643
Application range
Video of EJOT Iso-Corners:
https://youtu.be/uJo7grLKqyA
> F
or the planned retro-fitting of medium heavy to heavy attachments to ETICS facades.
Application examples
>
>
>
>
Railings
Guardrails
Window and sliding shutters
Consoles, f.e. for air conditioning units
Benefits
> One element / two installation surfaces
> Cut to length at the job site – the perfect
adaptation to the surface
> Load application with a distance up to
20 mm to the installation surface permitted
(bridging of non-load-bearing layers
e. g. plaster)
> High reliability and load-carrying capacity with this building
authorities approved system
> Reduces cold bridging through thermal decoupling
> Can be combined with special Iso-Corner fastening kits
(facade anchor or chemical anchor system)
> Fixing the attachment with direct assembly:
pre-drill / screw in / done
> Variable screw position and number for highest flexibility /
adjustment to the attachment
Technical data
Base plate
140 x 270 mm
Total height EJOT Iso-Corner 140
140 mm
Total height EJOT Iso-Corner 200
200 mm
Total height EJOT Iso-Corner 300
300 mm
Included in delivery
Order description
PU
[pieces]
Iso-Corner 140
1
8778140070
Iso-Corner 200
1
8778200070
Iso-Corner 300
1
8778300070
2
Price/1
[EUR]
Articlen umber
Sale of Iso-Corner is exclusively via system holders.
Mounting elements for attachments
EJOT® Iso-Corner cut to length
Flexibly applicable, no matter what the thickness of the insulating material
Iso-Corner 300
Iso-Corner 200
Thanks to the option of cutting to
length on site a streamlined production programme can be achieved.
The EJOT Iso-Corner is available in
three lengths and even more flexible
to apply as a result.
Iso-Corner 140
Precise cutting of the EJOT Iso-Corner to length after the installation of
the ETICS – can be implemented
easily and flush to the upper edge of
the insulation layer.
Sale of Iso-Corner is exclusively via system holders.
3
Mounting elements for attachments
Attachment of add-on parts
Direct assembly of add-on parts with EJOT Delta PT 100x60
Fixing:
Flexible screw position and number
long the axis while maintaining 20
mm edge distance:
Mounting axis B
Mounting axis A
Option 1:
Direct assembly on the installation
axis of
the front face of the EJOT
Iso-Corner with EJOT Delta PT®
Option 2:
Direct assembly on the installation
axis of the side of the EJOT Iso-Corner with EJOT Delta PT®
4
Sale of Iso-Corner is exclusively via system holders.
Mounting elements for attachments
EJOT® Iso-Corner Set DELTA PT®
consisting of 2 pcs. EJOT Delta PT® 100x60/37 A4
Product description
The EJOT Delta PT® screw included in delivery has been the
benchmark in the automotive industry for reliable and easy direct
assembly into plastics for many years.
Application range
> For fastening add-on parts on EJOT Iso-Corner
Benefits
> High load capacity direct fastening
into plastic material
> Direct assembly saves time and work steps
> Easy installation
> High fatigue strength
> Safety due to high tensile and torsion strength as well as
vibration resistance
> A wide range of possible tightening torques
Technical data
Core hole Ø
8 mm
Drill hole depth
≥ 40 mm
Screw drive
SW13
Order description
PU
[pieces]
Is
o-Corner Set DELTA PT
1
Price/1
[EUR]
Article number
8 778000060
Load application
The load can be applied
directly to the installation
surface or at a distance up
to 20 mm and distinguishes
itself from „conventional addon parts“ as a result.
Sufficient compressive
strength for the barrier sheet
has to be assured.
Sale of Iso-Corner is exclusively via system holders.
5
Mounting elements for attachments
EJOT® Iso-Corner Kit SDF
consisting of 3 pcs. EJOT facade anchors SDF-KB-10H
Application range
Technical specifications
> For fastening the EJOT Iso-Corner to
concrete, rain screens, solid and perforated brick masonry
SW13/TX40
Characteristics
> Approved for all common building materials
> Reliable hold in problematic building material thanks to
optimised expansion part
> Radial expansion for reliable hold
> Cr VI-free coating of the screw
> Double safety lock against torsion for secure installation
Certifications
Assembly
Note
Please observe European
Technical Ap
proval ETA10/0305 in the planning
and processing of products.
Further information about
parameters and loads can be
found in the approval.
ETA-10/0305
> Core-drill hole at a right angle to the surface of the installation
substrate. Choice of drilling method according to approval.
> The drill dust has to be removed from the hole.
> Hole depth at least 10 mm larger than the embedment depth.
> Push anchor sleeve in as far as the connecting surface in drill
hole.
> Strictly adhere to minimum embedment depth according to
chart!
> Screw enclosed special screw into the the anchor sleeve as
far as the connecting surface.
Technical data
PU
[Kit]
Order description
Price/1
[EUR]
Artikel number
Hole depth in concrete h1,1
≥ 80 mm
Effective Embedment depth hnom
≥ 70 mm
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
Drill hole diameter d0
10 mm
Iso-Corner Kit SDF 100
1
8513100423
Iso-Corner Kit SDF 120
1
8513120423
Iso-Corner Kit SDF 140
1
85131
40423
Characteristic loads
Temperature range 30 °C / 50 °C
4.50 kN
Temperature range 50 °C / 80 °C
4.00 kN
Tolerance compensation –
non-load-bearing layers
(adhesives, plasters, etc.) [mm]
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
Brick Mz 20-1.8, NF
4.00 kN
Iso-Corner Kit SDF 100
100
0*
Solid sand-lime brick KS 36, NF
4.50 kN
Iso-Corner Kit SDF 120
120
0-20
Solid sand-lime brick KS 20, 8 DF
4.50 kN
Iso-Corner Kit SDF 140
140
20-40
Solid lightweight concrete brick V6, 2 DF
2.00 kN
*on flat surface areas
Vertically perforated brick HLz 12-0.9, NF
2.00 kN
Perforated sand-lime brick KSL 12, 4 DF
2.50 kN
Cavity block made of lightweight concrete Hbl 10, 12 DF
1.20 kN
Tensile load NRk,p in concrete C12/15
Transverse load VRk,s
Anchor with steel screw
9.35 kN
Bending moment MRk,s
Anchor with steel screw
6
17.67 Nm
Order description
Length
[mm]
Accessories (optional)
Order description
PU
[pieces
Blow-out pump 8 mm
1
91
50300000
Cleaning brush 12
1
9150300012
Price/1
[EUR]
Artikel number
Sale of Iso-Corner is exclusively via system holders.
Mounting elements for attachments
EJOT® Iso-Corner Kit SDP
consisting of 3 pcs. EJOT facade anchors SDP-KB-10G
Application range
Technical specifications
> F
or fastening the EJOT Iso-Corner
to aerated concrete
SW13/TX40
Characteristics
Certifications
> F
acade anchor with two-stage screw
> Reliable form-fit in the substrate thanks to combined expansion zones
> High load capacity
ETA-12/0502
Assembly
> Core-drill
hole at a right angle to the surface of the installation
substrate. Choice of drilling method according to approval.
> The drill dust has to be removed from the hole.
> Hole depth at least 10 mm larger than the embedment depth.
> Push anchor sleeve in as far as the connecting surface in drill
hole.
> Strictly adhere to minimum embedment depth according to
chart!
> Screw enclosed special screw into the the anchor sleeve as
far
as the connecting surface.
Technical data
Note
For planning and processing,
please observe approval
ETA-12/0502.
Characteristic values
Drill hole depth ≥ t
≥ 80 mm
Compressive strength aerated concrete [N/mm2]
Embedment depth ≥ hv
≥ 70 mm
Aerated concrete 2
0,75 kN
Drill hole diameter d0
10 mm
Aerated concrete 3
1,31 kN
Aerated concrete 4
1,87 kN
Aerated concrete 6
3,00 kN
Partial safety factor γMAAC
2,00
Characteristic Bending moment
17,7 Nm / γMs 1,50
Steel screw
Order description
Ø [mm]
Length
[mm]
Tolerance compensation –
non-load-bearing layers
(adhesives, plasters, etc.) [mm]
PU
[Kit]
Price/1
[EUR]
Artikel number
Anchors with steel screws with zinc-plated Cr(VI)-free coating (-V)
Iso-Corner Kit SDP 100
10
100
0*
1
8532100423
Iso-Corner Kit SDP 120
10
120
0-20
1
8532120423
Iso-Corner Kit SDP 140
10
140
20-40
1
8532140423
*on flat surface areas
Accessories (optional)
Order description
PU
[pieces
Blow-out pump 8 mm
1
9150300000
Cleaning brush 12
1
9150300012
Sale of Iso-Corner is exclusively via system holders.
Price/1
[EUR]
Artikel number
7
Mounting elements for attachments
Iso-Corner Kit Injektion
consisting of 3 pcs. anchor rods AST and 3 pcs. mesh sleeves USF
Anchor rod AST
approved for polyester and vinyl ester composite mortar
Application range
Note
To determine the characteristic load capacity in concrete,
approval ETA-16/0107 has to
be considered. To determine
the characteristic load capacity in solid and perforated
brick, approval ETA-16/0089
has to be considered.
> For embedment in concrete and solid brick
> For embedment in perforated brick in combination with mesh
sleeve
Characteristics AST Stahl
> A
nchor rod: strength grade 5.8 or 6.8
acc. to EN ISO 898-1
> Nut: strength grade 5 or 6
acc. to EN 20898-2
> Washer: acc. to EN ISO 7089
Characteristic values
PU
[Kit]
Order description
Embedment depth hef
Concrete
≥ 60 mm
Solid brick masonry
90 mm
Perforated
brick masonry*
85 mm
Drill hole diameter do
Concrete
12 mm
Solid brick masonry
12 mm
Perforated brick masonry*
16 mm
Price /1
Article number
[EUR]
Iso-Corner Kit Injection
consisting of 3 pcs. anchor rods AST
1
M10x170-V and
3 pcs. mesh sleeves USF 16x85
8778000170
*When using the mesh sleeve USF 16x85
Mesh sleeve USF
Application range
Certifications
> For embedment in perforated brick
Characteristics
ETA-16/0089
> G
uarantees exact calibration of
threaded rod
Note
Please observe the corresponding approvals during
planning and processing.
Accessories (optional)
Order description
8
PU
[pieces]
Application
Price/1
[EUR]
Article number
Applicator gun AP 300 ml
1
9570010300
Blow-out pump 8 mm
1
9150300000
Cleaning brush 14
without mesh sleeve
1
9150300014
Cleaning brush 18
with mesh sleeve
1
9150300018
Sale of Iso-Corner is exclusively via system holders.
Mounting elements for attachments
Mortar cartridge USF
Vinyl resin, styrene-free
Applic
ation range
Technical specifications
> For
installation in cracked concrete (option 1) and noncracked concrete (option 7)
(ETA-16/0107)
> For installation in masonry (ETA-16/0089)
> For installation in natural stone (without approval)
F120
Certifications
Benefits
> P
rocessing with common applicator gun possible
> Can be used in wet concrete and water-filled drill holes
> Delivery including mixing nozzle
ETA-16/0107
ETA-16/0089
Note
Please observe the corresponding approvals during planning
and processing.
Winter version upon request
Video of EJOT Iso-Corners:
https://www.youtube.com/
watch?v=SZ74JAt5Apc
d0
hef=h0
d0
Installation parameters (USF 280 ml)
h0
Installation parameters
Ambient
temperature
[°C]
Processing time
Curing time
in dry
weather
Curing time
in wet
weather
-10*
1h 30’
24h
48h
Anchor rod
d0
[mm]
hef = h0
min - max [mm]
≥ -5
1h 30’
14h
28h
≥0
45’
7h
14h
M10
12
60 - 200
≥ +5
25’
2h
4h
≥ +10
15’
1h 20’
2
ation range
Technical specifications
> For
installation in cracked concrete (option 1) and noncracked concrete (option 7)
(ETA-16/0107)
> For installation in masonry (ETA-16/0089)
> For installation in natural stone (without approval)
F120
Certifications
Benefits
> P
rocessing with common applicator gun possible
> Can be used in wet concrete and water-filled drill holes
> Delivery including mixing nozzle
ETA-16/0107
ETA-16/0089
Note
Please observe the corresponding approvals during planning
and processing.
Winter version upon request
Video of EJOT Iso-Corners:
https://www.youtube.com/
watch?v=SZ74JAt5Apc
d0
hef=h0
d0
Installation parameters (USF 280 ml)
h0
Installation parameters
Ambient
temperature
[°C]
Processing time
Curing time
in dry
weather
Curing time
in wet
weather
-10*
1h 30’
24h
48h
Anchor rod
d0
[mm]
hef = h0
min - max [mm]
≥ -5
1h 30’
14h
28h
≥0
45’
7h
14h
M10
12
60 - 200
≥ +5
25’
2h
4h
≥ +10
15’
1h 20’
2
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Catalog, brosura
4 p | EN
Iso-Bar Iso-Bar ECO
Catalog, brosura
8 p | GE
Iso-Bar