Prezentare produs - Adeziv etansare filete metalice EMS FORCE EMS FORCE 5542
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
SECTION 1: Identification of the substance/mixture and of the
company/undertaking
1.1. Product identifier
Product name
Contains
:
EMS FORCE® Pipe Sealant 5542
:
Methacrylic acid, monoester with propane-1,2-diol and
cumene hydroperoxide
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified uses
Use of the substance/mixture
:
Anaerobic sealant and thread locking
1.3. Details of the supplier of the safety data sheet
Manufacturer/Supplier
: Metsan Endüstriyel Yapıştırıcılar Ticaret Anonim Şirketi
Birlik Organize Sanayi Bölgesi Batı Caddesi 1.Sokak No.1
34953 Tuzla, Istanbul TURKEY
Telephone: +90 216 444 06 49
Telefax: +90 212 253 42 12
Web: www.metsan.gen.tr
Responsibility statem
ent
: For further information please contact with following e-mail
address, sds@metsan.gen.tr
1.4. Emergency telephone number
Metsan: +90 (0212) 235 52 55
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
According to Regulation (EC) No. 1272/2008 [CLP]
Skin sensitisation
: Category 1 (H317)
Eye irritation
:
Specific target organ toxicity -
Category 2 (H319)
Category 3 (H335)
Single exposure,
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
1/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
2.2. Label elements
According to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictogram(s)
GHS 07
Signal word
Warning
Hazard statement(s)
Physical hazards
:
Not classified.
He
alth hazards
:
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation
Environmental hazards
:
Not classified.
:
P280: Wear protective gloves/protective clothing/eye
Precautionary statement(s)
Prevention
protection/face protection.
Response
:
P333 + P313: If skin irritation or rash occurs: Get medical
advice/ attention.
P337 + P313: If eye irritation persists: Get medical
advice/attention.
Storage
:
P403 + P233: Store in a well-ventilated place. Keep container
tightly closed.
Disposal
:
P501: Dispose of contents/container to an appropriate
disposal facility.
Supplemental information on label
Not applicable.
2.3. Other hazards
This mixture contains no substance considered to be persistent, bioaccumulating nor toxic (PBT).
This mixture contains no substance considered to be very persistent nor very bioaccumulating
(vPvB).
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved.
Copies may be only made for those using Metsan
products.
2/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
SECTION 3: Composition/information on ingredients
3.2. Mixtures
Name
CAS No.
EC No.
REACH
Registration No.
wt%
Classification according
to Regulation (EC) No.
1272/2008 [CLP]
Methacrylic acid,
monoester with
propane-1,2-diol
27813-02-1
248-666-3
01-2119490226-37
70.0 - <90.0
Skin Sens. 1- H317
Eye Dam. 2- H319
Cumene
98-82-8
202-704-5
01-2119473983-24
0.1 - <0.5
Cumene
hydroperoxide
80-15-9
201-254-7
01-2119475796-19
1.0 -<3.0
Flam Liq 3- H226
Asp. Tox. 1- H304
STOT SE. 3- H335
Aquatic Chr. 2- H411
Org. Perox. EF- H242
Acute Tox. 4- H302
Acute Tox. 4- H312
Acute Tox. 3- H331
Skin Corr. 1B- H314
Skin Corr.2-H315
Eye Dam. 1- H318
STOT SE 3- H335
STOT RE 2- H373
Asp. Tox. 1-
H304
Aquatic Chr. 2- H411
• Up to the given revision date of this safety data sheet only the above mentioned REACH
registration numbers are assigned to the chemical substances used in this mixture.
Additional information
See full text of H-phrases and classification codes in chapter 16.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation
Avoid inhalation of vapour or mist. Move to fresh air in case of accidental inhalation of vapours. If
breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery
position and seek medical advice. If symptoms persist, call a physician.
Ingestion
If swallowed, seek medical advice immediately and show this container or label. Do NOT induce
vomiting. Keep at rest.
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
3/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04
/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
Skin contact
Do NOT use solvents or thinners. Take off all contaminated clothing immediately. Wash skin
thoroughly with soap and water or use recognized skin cleanser. If skin irritation persists, call a
physician.
Eye contact
Remove contact lenses. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the
eyelids apart. Seek medical advice.
Self-protection of the first aider
Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.
4.2. Most important symptoms and effects, both acute and delayed
Please see practical experience in Section 11.
4.3. Indication of any immediate medical attention and special treatment needed
No information available.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
Use a firefighting agent suitable
for ordinary combustible material such as water or foam to
extinguish.
Unsuitable extinguishing media
Do not use high power water jet.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products
Closed containers exposed to heat from fire may build pressure and explode. Exposure to extreme
heat can give rise to thermal decomposition.
Hazardous decomposition or by-products
Carbon dioxide
Carbon monoxide
Nitrogen oxides
Sulfur oxides
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
4/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
5.3. Advice for firefighters
Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers
and surfaces c
ool and prevent explosive rupture. When firefighting conditions are severe and total
thermal decomposition of the product is possible, wear full protective clothing, including helmet,
self-contained, positive pressure or pressure demand breathing apparatus, tunic and trousers
(leggings), bands (around arms, waist and legs), face mask, and protective covering for exposed
areas of the head.
Special protective equipment and firefighting procedures
There is no specific recommended protective equipment other than suggested above.
Additional information
In case of fire, keep containers cool with water spray.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Refer to Section 8 of SDS for personal protection details. If outside do not approach from downwind.
If outside keep bystanders upwind and away from danger point. Mark out the contaminated area
with signs and prevent access to unauthorized personnel. Turn leaking containers le
ak-side up to
prevent the escape of liquid.
6.2. Environmental precautions
Do not let product enter drains. Notify the respective authorities in accordance with local law in the
case of contamination of rivers, lakes or waste water systems. Please avoid any emission of volatile
organic compounds as possible.
6.3. Methods and materials for containment and cleaning up
Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite,
diatomaceous earth and place in container for disposal according to local regulations. The
contaminated area should be cleaned up immediately with a suitable decontaminant. One possible
(flammable) decontaminant comprises (by volume): water (45 parts), ethanol or isopropyl alcohol (50
parts), concentrated (density: 0,880) ammonia solution (5 parts). After usage of suitable
decontaminant, transfer the material to a closable, labelled salvage container for disposal by an
appropriate method.
© 2016 Metsan Endüstriyel YapÄ
±ÅŸtırıcılar Ticaret A.Åž. All rights
reserved. Copies may be only made for those using Metsan
products.
5/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
6.4. Reference to other sections
For appropriate self-protection equipment, please apply the suggested protection procedures given
in Section 8.
For disposal of waste, please see advices in Section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Safe handling advice
Avoid inhalation of thermal decomposition products. For industrial or professional use only. Store
work clothes separately from other clothing, food and tobacco products. Do not handle until all
safety precautions have been read and understood. Wash contaminated clothing before reuse.
Avoid breathing vapours. Contaminated work clothing should not be all
owed out of the workplace.
7.2. Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
Store in original containers at 8-21°C (46.4-69.8°F) and do not return residual materials to containers
as contamination may reduce the shelf life of the bulk product.
Advice on common storage
Store separately from oxidizing agents, strongly alkaline and strongly acidic materials, amines,
alcohols and water. Do not store together with explosives, gases, oxidizing solids, products which
form flammable gases in contact with water, oxidizing products, infectious products and radioactive
products.
Additional information on storage conditions
Protect against UV and sunlight. Keep away from heat sources and humid media.
7.3. Specific end use(s)
Fixing and sealing of metallic pipes and fittings.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Community / national occupational exposure limit values
© 2016 Metsan Endüstri
yel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
6/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
Cumene hydroperoxide (CAS No: 80-15-9)
Limit value – Eight hours
ppm
mg/m3
1
Latvia
Limit value – Short term
ppm
mg/m3
-
Cumene (CAS No: 98-82-8)
Australia
Austria
Belgium
Canada – Ontario
Canada – Québec
Denmark
European Union
Finland
France
Germany (AGS)
Germany (DFG)
Hungary
Ireland
Italy
Latvia
New Zealand
Poland
Singapore
South Korea
Spain
Sweden
Switzerland
The Netherlands
Turkey
USA – NIOSH
USA – OSHA
United Kingdom
-
Limit value – Eight hours
ppm
mg/m3
25
125
20
100
20
100
50
50
246
20
100
20
100
20
100
20
100
10
50
10
50
100
20
100
20
100
20
100
25
125
100
50
246
50
245
20
100
25
120
20
100
100
20
100
50
245
50
245
25
125
Limit value – Short term
ppm
mg/m3
75
375
50
250
50
250
40
50
50
50
40
40
50
50
50
75
50
35
80
200
250
250
250
200
200
250
250
250
250
375
250
50
250
170
400
250
250
75
375
OEL values that are given in this subsection are taken from GESTIS International Limit Values
database.
If a component is disclosed in Section 3 but does not appear in the table given above, an
occupational exposure limit value is not available for the corresponding component.
Information on monitoring procedures
DN(M)Els
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
7/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
CAS No.
27813-02-1
80-15-9
98-82-8
Chemical
name
Methacrylic
acid,
monoester
wit
h propane1,2-diol
End use
Exposure
routes
Frequency
of exposure
Workers
Inhalation
Chronic
Workers
Dermal
Chronic
Consumers
Dermal
Chronic
Consumers
Inhalation
Chronic
Consumers
Oral
Chronic
Type
Not
specified.
Not
specified.
Not
specified.
Not
specified.
Not
specified.
Workers
All routes
-
-
Consumers
All routes
-
-
Consumers
Inhalation
Chronic
Systemic
Consumers
Oral
Chronic
Systemic
Workers
Dermal
Acute
Systemic
Workers
Dermal
Chronic
Local
Workers
Dermal
Chronic
Systemic
Consumers
Inhalation
Acute
Local
Consumers
Inhalation
Acute
Systemic
Consumers
Inhalation
Chronic
Local
Cumene
hydroperoxide
Cumene
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
8/30
Value
14.7 mg/m3
4.2 mg/kg
2.5 mg/kg
8.8 mg/m3
2.5 mg/kg
WARNING: Some
DNEL/PNEC values
exist in the REACH
disseminated
dossier(s), but we are
not confident in these
data
WARNING:
Some
DNEL/PNEC values
exist in the REACH
disseminated
dossier(s), but we are
not confident in these
data
16.6 mg/m³
Repeated dose
toxicity
5 mg/kg bw/day
Repeated dose
toxicity
No hazard identified
Medium hazard (no
threshold derived)
No hazard identified
Hazard unknown (no
further information
necessary)
Hazard unknown (no
further information
necessary)
Hazard unknown (no
further information
necessary)
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
-
Consumers
Inhalation
Chronic
Systemic
Consumers
Dermal
Acute
Local
Hazard unknown (no
further information
necessary)
No hazard identified
Consumers
Consumers
Dermal
Dermal
Acute
Chronic
Systemic
Local
No hazard identified
No hazard identified
Consumers
Dermal
Chronic
Systemic
Consumers
Oral
Chronic
Systemic
No hazard identifie
d
Low hazard (no
threshold derived)
If a component is disclosed in Section 3 but does not appear in the table given above, a
DN(M)EL is not available for the corresponding component.
PNECs
CAS No.
27813-02-1
Chemical name
Methacrylic acid,
monoester with
propane-1,2-diol
Environmental
protection target
Value
Extrapolation method
Freshwater
0.904 mg/L
Assessment factor: 50
Marine water
0.904 mg/L
Assessment factor: 50
Intermittent releases
STP
Assessment factor: 100
Assessment factor: 10
Freshwater
0.972 mg/L
10 mg/L
6.28 mg/kg
sediment dw
6.28 mg/kg
sediment dw
0.727 mg/kg soil
dw
0.003 mg/L
Marine water
0 mg/L
Assessment factor: 10000
Intermittent releases
0.031 mg/L
Assessment factor: 100
STP
0.35 mg/L
Assessment factor: 1
Sediment (freshwater)
Sediment (marine water)
Soil
80-15-9
Cumene
hydroperoxide
Sediment (freshwater)
Sediment (marine water)
Soil
98-82-8
Cumene
0.023 mg/kg
sediment dw
0.002 mg/kg
sediment dw
0.003 mg/kg soil
dw
Partition coeffi
cient
Partition coefficient
Partition coefficient
Assessment factor: 1000
Partition coefficient
Partition coefficient
Partition coefficient
Freshwater
35 µg/L
Assessment factor: 10
Marine water
3.5 µg/L
Assessment factor: 100
Intermittent releases
12 µg/L
Assessment factor: 100
STP
200 mg/L
Assessment factor: 10
Sediment (freshwater)
3.22 mg/kg
çökelti dw
Partition coefficient
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
9/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
Sediment (marine water)
Soil
-
322 µg/kg
sediment dw (1)
624 µg/kg soil
dw (1
Partition coefficient
Partition coefficient
If a component is disclosed in Section 3 but does not appear in the table given above
, a PNEC
is not available for the corresponding component.
8.2. Exposure controls
Appropriate engineering controls
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of
vapors below their respective occupational exposure limits. Ensure that eyewash stations and safety
showers are close to the workstation location.
Personal protection
Personal protection equipments
:
Eye protection
:
Safety glasses with side shields or chemical safety goggles
should be worn if there is a risk of splashing of material.
Skin protection
:
Hand and other skin protection
Select and use gloves and/or protective clothing approved to
relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be
based on use factors such as exposure levels, concentration
of the substance or mixture, frequency and duration, physical
challenges such as temperature extremes, and other use
conditions. Consult with your glove a
nd/or protective
clothing manufacturer for selection of appropriate
compatible gloves/protective clothing. Gloves made from
the following material(s) are recommended:
- Butyl rubber at least 0.5 mm thickness
- Fluoroelastomer at least 0.4 mm thickness
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
10/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
Respiratory protection
:
In case of brief exposure or low pollution use respiratory filter
device. In case of intensive or longer exposure use selfcontained respiratory protective device.
Environmental exposure controls
Do not let product enter drains. For ecological information refer to Section 12. Also, check for
Environmental Precautions in Section 6.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
: Liquid
Color
:
Red
Odor
:
Acrylate, characteristic
Odor threshold
:
No data available.
Property
Values
Method(s) and remark(s)
pH
Not applicable.
Melting point/freezing point
Not applicable.
Initial boiling point and boiling range
>149ËšC
Flash point
>100ËšC
Evaporation rate
Negligible.
Flammability (solid, gas)
Not applicable.
Flammability limit in air
Upper flammability limit
Not applicable.
Lower flammability limit
Not applicable.
Vapor pressure
<666.6 Pa
at 26.5ËšC
Vapor density
No data available.
Relative density
1.035
at 20ËšC (Ref. water at 20ËšC)
In water
Not miscible.
At 25ËšC
In other solvent(s)
No data available.
Solubility(ies)
Partition coefficient: n-octanol/water
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
No data avai
lable.
11/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
Auto-ignition temperature
Not applicable.
Decomposition temperature
No data available.
Viscosity
7000 cPs
Explosive properties
Not classified.
Oxidising properties
Not classified.
at 20ËšC
9.2. Other data
Property
Values
Method(s) and remark(s)
Softening temperature
No data available.
VOCs content
No data available.
Density
1.035 g/cm3
at 20ËšC
SECTION 10: Stability and reactivity
10.1. Reactivity
Keep away from oxidising agents and strongly acid or alkaline materials. Mixture can rapidly react
with these materials and produce CO2.Evolution of CO2 in closed containers causes overpressure
and produces a risk of bursting.
10.2. Chemical stability
The product is chemically stable.
10.3. Possibility of hazardous reactio
ns
Hazardous polymerization reaction may occur in large quantities only.
10.4. Conditions to avoid
Stable under recommended storage and handling conditions (see Section 7).
10.5. Incompatible materials to avoid
Refer to reactivity in this section.
10.6. Hazardous decomposition products
Refer to Section 5.2 for hazardous decomposition products during combustion.
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
12/30
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
SECTION 11: Toxicological information
11.1. Information on toxicological effects
General observations
The mixture is classified based on the available hazard information for the ingredients as defined in
the classification criteria for mixtures for
each hazard class or differentiation in Annex I to Regulation
1272/2008/EC. Due to the absence of specific data on the mixture regarding interactions between
component substances, relevant health effects of each substance are listed. Relevant available
health/ecological information for the substances listed under Section 3 is provided in the following.
Practical experience
No information available
Acute toxicity
CAS No.
27813-02-1
80-15-9
98-82-8
Chemical name
Methacrylic acid,
monoester with
propane-1,2-diol
Cumene
hydroperoxide
Cumene
Species
Type
Exposure
duration
Value
Method(s)
and/or
reference(s)
and/or note(s)
>2000
mg/kg bw
OECD Guideline
401 (Acute Oral
Toxicity)
Rat
LD50 Oral
-
Rabbit
LD50 Dermal
24 h
Rat
LD50
Intraperitoneal
-
Rat
LD50 Oral
-
Rat
LC50 Inhalation
4h
Rat
LD50 Dermal
-
Rat
LD50 Oral
-
Rat
LC0 Inhalation
1h
Rabbit
LD50 Dermal
24 h
>5000
mg/kg bw
500-1000
mg/kg bw
382 mg/kg
bw
220 ppm
1.20-1.52
mg/kg bw
2 910
mg/kg bw
2
2.1 mg/L
air
> 3 160
mg/kg bw
-
Skin corrosion/irritation
CAS No.
Chemical name
Species
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
Exposure
duration
13/30
Result
Method(s) and/or
reference(s) and/or
note(s)
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
27813-02-1
80-15-9
98-82-8
Methacrylic acid,
monoester with
propane-1,2-diol
Cumene
hydroperoxide
Cumene
Rabbit
24 h
Not irritating
Rabbit
72 h
Rabbit
72 h
Species
Exposure
duration
Result
Method(s) and/or
reference(s) and/or
note(s)
Rabbit
72 h
Not irritating
Draize test
Rabbit
24 h
Rabbit
72 h
Strong skin
reactions
Not irritating
OECD Guideline 404
Serious eye damage/irritation
CAS No.
27813-02-1
80-15-9
98-82-8
Chem
ical name
Methacrylic acid,
monoester with
propane-1,2-diol
Cumene
hydroperoxide
Cumene
Severe
irritation
Not irritating
OECD Guideline 404
Respiratory or skin sensitisation
CAS No.
Chemical name
Species
Exposure
duration
Human
-
27813-02-1
Methacrylic acid,
monoester with
propane-1,2-diol
Guinea pig
-
Cumene
Guinea pig
48 h
98-82-8
Result
Not
sensitising
Not
sensitising
Not
sensitising
Method(s) and/or
reference(s) and/or
note(s)
OECD Guideline 406
Germ cell mutagenicity
CAS
No.
2781302-1
Chemical
name
Methacrylic acid,
monoester with
propane-1,2-diol
Species
Type
Route
Result
Chinese
hamster
Ovary
Gene mutation
In vitro
Not mutagenic
Escherichia
coli WP2
uvrA
Gene mutation
In vitro
Not mutagenic
© 2016 Metsan Endüstriyel Yapıştırıcılar Ticaret A.Ş. All rights
reserved. Copies may be only made for those using Metsan
products.
14/30
Method(s)
and/or
reference(s)
and/or note(s)
OECD Guideline
476 (In vitro
Mammalian Cell
Gene Mutation
Test)
OECD Guideline
472 (Genetic
Toxicology:
Escherichia coli,
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
98-82-8
Cumene
Mouse
Oral
In vivo
Not mutagenic
Chinese
hamster
Overy
Gene mutation
In vitro
Not mutagenic
In vivo
Not mutagenic
In vitro
Mutagenic
OECD Guideline
474
-
Gene mutation
In vitro
Mutagenic
-
Dermal
Intraperitoneal
In vivo
In vivo
Not mutagenic
Not mutagenic
-
Exposure
duration
Result
Method(s)
and/or
reference(s)
and/or note(s)
Mouse
80-15-9
Cumene
hydroperoxide
Reverse Mutation
Assay)
OECD Guideline
474 (Mammalian
Erythrocyte
Micronucleus Test)
MX100
PQ300,
PQ37
Mouse
Mouse
Chromosom
aberration
Gene mutation
OECD Guideline
476
Carcinogenicity
CAS
No.
27813-021
Chemical
name
Methacrylic acid,
monoester with
propane-1,2-diol
Species
Type
Mous
OECD Guideline
472 (Genetic
Toxicology:
Escherichia coli,
Version
Revision date
Issue date
Form No
:
:
:
:
3.5
02/01/2018
01/04/2010
0101060011
SAFETY DATA SHEET
EMS FORCE® Pipe Sealant 5542
according to Regulation (EC) No. 1907/2006(REACH) with its amendment Regulation (EC) No. 2015/830
98-82-8
Cumene
Mouse
Oral
In vivo
Not mutagenic
Chinese
hamster
Overy
Gene mutation
In vitro
Not mutagenic
In vivo
Not mutagenic
In vitro
Mutagenic
OECD Guideline
474
-
Gene mutation
In vitro
Mutagenic
-
Dermal
Intraperitoneal
In vivo
In vivo
Not mutagenic
Not mutagenic
-
Exposure
duration
Result
Method(s)
and/or
reference(s)
and/or note(s)
Mouse
80-15-9
Cumene
hydroperoxide
Reverse Mutation
Assay)
OECD Guideline
474 (Mammalian
Erythrocyte
Micronucleus Test)
MX100
PQ300,
PQ37
Mouse
Mouse
Chromosom
aberration
Gene mutation
OECD Guideline
476
Carcinogenicity
CAS
No.
27813-021
Chemical
name
Methacrylic acid,
monoester with
propane-1,2-diol
Species
Type
Mous
... ascunde
Alte documentatii ale aceleasi game Vezi toate
Fisa tehnica
3 p | EN
EMS FORCE 5542
Instructiuni montaj, utilizare
2 p | RO
EMS FORCE 5542 EMS FORCE 5543 EMS FORCE 5577