Decofrol pe baza de ulei vegetal in emulsie apoasa pentru imbunatatirea aspectului betonului aparent MAPEI MAPEFORM ECO 31

Limba: Engleza

18 afisari

Tip documentatie: Fisa tehnica

Pagina 1 - Decofrol pe baza de ulei vegetal in emulsie apoasa pentru imbunatatirea aspectului...

m r 1 o f 3 e o p c a M E Form release-agent based on vegetable oils in water emulsion with chemical action WHERE TO USE Anti-adhesive treatment of iron, aluminum and plastic forms (epoxy, phenolic, polyester and polyurethane resins). It is particularly suitable for vertical applications. Some application examples • To facilitate form release of precast concrete. Its particular viscosity makes it suitable for vertical applications on formworks where it is important to limit product pouring when sprayed. • To facilitate form release of steam-cured concrete. • To form release concrete cast in plastic forms. • To form release concrete cast in metal forms. TECHNICAL CHARACTERISTICS Mapeform Eco 31 consists of a stable emulsion of vegetable oils, corrosion inhibitors and special admixtures developed in the MAPEI Research Laboratories. The efficiency of Mapeform Eco 31 is given by its action of chemical concrete stripping from formwork. Mapeform Eco 31 features the following advant

Pagina 1-Decofrol pe baza de ulei vegetal in emulsie apoasa pentru imbunatatirea aspectului betonului aparent...

Pagina 2 - Decofrol pe baza de ulei vegetal in emulsie apoasa pentru imbunatatirea aspectului...

ages: • improved surface quality thanks to the drastic reduction of large and micro surface air bubbles; • no surface dusting; • no grease stains, even with white cements; • less cleaning of forms; • simple low-cost application; • easily and rapidly biodegradable; non toxic, does not irritate and does not cause sensitization; •n ot subject to the Italian law for the use of form release-agents based on mineral oils. RECOMMENDATIONS • Do not dilute Mapeform Eco 31 with water. •D o not dilute Mapeform Eco 31 with solvents or other oils. •P referably use Form Release Agent DMA 1000 with raw wood forms. •D o not use Mapeform Eco 31 with concrete, gypsum and polystyrene forms. •W hen using with rubber forms make sample tests or contact the MAPEI Technical Services Department. HOW TO USE Mapeform Eco 31 is ready-to-use. Application Apply Mapeform Eco 31 on the clean, dry formwork, preferably in a single coat, using pumps or atomisers at a pressure of 6 bar