Profile WIELAND de cupru WIELAND

Limba: Engleza
3 afisari
Tip documentatie: Fisa tehnica
Salvează pdf
Pagina 1-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza Copper sections
and components

Copper...
Pagina 2-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza metall amstetten Ges.m.b.H in Amstetten...
Pagina 3-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza r copper alloys,
at our plant in Vöhringen,...
Pagina 4-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza ections
Technical solutions achieved through...
Pagina 5-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza industry if there are
no requirements...
Pagina 6-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza ogen
embrittlement,
good weldability
and...
Pagina 7-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza  well as processrelated limits of copper...
Pagina 8-Profile WIELAND de cupru WIELAND Fisa tehnica Engleza 

DCC

Production technologies
For the...
DCC Production technologies For the production of copper sections the Wieland Group has all production technologies at its disposal, from the roll forming of a continuous cast and rolled wire, via the CONFORM process through to the extruding technology. The processes mentioned can be completed with a drawing process setting certain tempers and tolerances. Diameter of circumscribed circle The extruding technology used at the plants in Vöhringen, Germany, and Amstetten, Austria, enables us to achieve a substantial structural transformation and to get close to the final cross-section in a cost-effective manner. Using the CONFORM process at our plant in Amstetten, Austria, profiles with small to medium-sized cross-sections can be manufactured from a copper wire. The process is characterised by the possibility of a nearly endless continuous production. At our plant in Vöhringen, Germany, very small sections with weights of 2.0 g/m to 250 g/m are manufactured from cast wire using a sh ... ascunde

Alte documentatii ale aceleasi game
Vezi toate

Bare de precizie rotunde, din alama

Fisa tehnica
4 p | EN
W5000
Lucru în România