y brush or roller. Allow to flash off for
at least 1 hour before application of sealant. Sealant should be applied within 24
hours of applying Sika® Primer -3N.
Cleaning of Tools
Clean all tools and application equipment with Sika® Kwiklean water soluble solvent
immediately after use. Hardened / cured material can be removed mechanically.
Notes on Application /
Limitations
Do not use on bituminous substrates, or on building materials which might be
affected by a solvent based product.
Notes
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control.
Local Restrictions
Please note that as a result of specific local regulations the performance of this
product may vary from country to country. Please consult the local Product Data
Sheet for the exact description of the application fields.
Health and Safety
Information
Protective Measures
To avoid rare allergic reactions, we recommend ... ascunde
