Placi HPL cu finisaj furnir - Parklex Facade Standard PARKLEX Facade

Limba: Engleza
6 afisari
Tip documentatie: Fisa tehnica
Salvează pdf
Pagina 1-Placi HPL cu finisaj furnir - Parklex Facade Standard  PARKLEX Facade Fisa tehnica Engleza PARKLEX...
PARKLEX FACADE S (Standard) TECHNICAL DATASHEET Thickness 6-22 mm Ref: FTFACADEEDS Rev: 10 (03.2017) Tests Standard Property or attribute Measurement unit Resultado Parklex Facade S (Standard) Rev: 10 (03.2017) 1. Inspection requirements Colour, pattern and surface finish EN 438-8 Part 5.2.2.3 Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood 2. Dimensional tolerances Thickness (t) EN 438-2 Part 5 6,0 ≤ t < 8,0 ± 0,40 mm 8,0 ≤ t < 12,0 ± 0,50 12,0 ≤ t < 16,0 ± 0,60 16,0 ≤ t < 20,0 ± 0,70 ± 0,80 20,0 ≤ t < 25,0 Flatness (1) EN 438-2 Part 9 6,0 ≤ t < 10,0 mm/m 5,0 3,0 10,0 ≤ t +10 / - 0 Length and width EN 438-2 Part 6 – mm ... ascunde

Alte documentatii ale aceleasi game
Vezi toate

Placi HPL cu finisaj furnir

Catalog, brosura
27 p | EN
PARKLEX Facade
Lucru în România