Placi HPL cu finisaj furnir - Parklex Facade Curved PARKLEX Facade

Limba: Engleza
15 afisari
Tip documentatie: Fisa tehnica
Salvează pdf
Pagina 1-Placi HPL cu finisaj furnir - Parklex Facade Curved  PARKLEX Facade Fisa tehnica Engleza TECHNICAL...
TECHNICAL DATASHEET Thickness = 6 mm PARKLEX FACADE CURVED Ref: FTFACADEC Rev: 04 (06.2016) Tests Standard Property or attribute Measurement unit Results EN 438-8 Part Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood 1. Inspection requirements Colour, pattern and surface finish 2. Dimensional tolerances Thickness 6 mm ±0,4 Curvature radius 330 mm ±10% 500 ±10% 1000 ±10% 2000 ±10% 4000 2440x595 Length and width ±10% mm +10/-0 595x1220 +10/-0 ≥ 1.800 3. Physical properties Resistance to impact with large diameter ball EN 438-2 Part 21 Maximum height for which no visible surface mm cracking or imprint greater than 10mm Deter ... ascunde

Alte documentatii ale aceleasi game
Vezi toate

Placi HPL cu finisaj furnir

Catalog, brosura
27 p | EN