Fisa tehnica - Placa de fibrobeton Natura EQUITONE

Limba: Engleza
357 afisari
Tip documentatie: Fisa tehnica
Salvează pdf
Pagina 1-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza EQUIONTE [natura]

Product...
Pagina 2-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza immed
+/- 12 mm
+/- 6 mm
2,5...
Pagina 3-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza m³
Bending strength...
Pagina 4-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza  soak / dry:
Pass
Durability...
Pagina 5-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza ors, windows)
• interior...
Pagina 6-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza ved can cause
permanent...
Pagina 7-Fisa tehnica - Placa de fibrobeton Natura EQUITONE Fisa tehnica Engleza lade and good quality cuts...
lade and good quality cuts it is important to adapt to varying conditions. cutting speed hard-metal saw blade: 2.0 – 2.5 m/ s diamond equipped saw blade: 60 m/ s passing speed hard-metal saw blade: 3.0 – 3.5 m / min diamond equipped saw blade: 20 m/ min With the specific Eternit Diamaster blade with diamond teeth a recommendation for cutting speed from 2.000 to 4,000 (rpm / min) is possible. Edge finishing with LUKO All the edges have to be impregnated with LUKO from Eternit AG. Drilling: Any commercial electric hand drill can be used, preferably with electronic control and a good drill bit. Do not use the hammer drill function. Heavy-duty, hard-metal drill bits should be used for continuous operation. The Eternit VHM (full-hard-metal) driller should be used for continuous operation. Cutting and drilling must take place in a dry environment. Sawing and drillings must be immediately removed from the sheet. Sawing and drillings not removed can cause permanent stains. Health and safet ... ascunde

Alte documentatii ale aceleasi game
Vezi toate

Lucru în România