Amorsa SIKA Sika Primer 600

te must offer sufficient strength and adhesion to resist the forces generated by wind suction. Substrate Preparation The substrate must be solvent resistant, firm, clean, dry, free of foreign objects and stripping agents as well as free of oil and grease. Compatibility Shall not be used on following substrates: - Synthetic membranes e.g. PVC, FPO - EPS/XPS thermal insulation boards - Lacquered surfaces Installation Instructions Application Method Apply only in dry weather at temperatures of at least +5 °C. Before applying ensure that the substrate is clean, dry, free of grease. If heavily contaminated or oiled, sheet metal must be cleaned with cleaner before applying the primer. Primer 600 is ready for use and may not be thinned or mixed with other products. Before use stir the primer vigorously. Apply a uniform, thin coat of Primer 600 to the area, which will be installed the same day. Absorbent substrates may require two coats. Allow sufficient drying time. Drying time depends ... ascunde